Felipe, There have been two successes at least with the new slmodemdTry using as your Init2Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 +MS=90 and if necessary add to /etc/wvdial.conf a line Carrier Check = no Report back MarvS On 8/28/07, Felipe Potes <fpol1@xxxxxxxxx> wrote:> I followed the instructions of the email using the> last version of slmodemd.gz you sent us. I replaced my> old version of slmodemd in /usr/sbin.> but when i testing it i have the following:> fpole@atlante:~$ sudo wvdial> --> WvDial: Internet dialer version 1.56> --> Cannot get information for serial port.> --> Initializing modem.> --> Sending: ATZ> ATZ> OK> --> Sending: ATQ0 X3 V1 E1 S0=0 &C1 &D2 +FCLASS=0> +MS=90> ATQ0 X3 V1 E1 S0=0 &C1 &D2 +FCLASS=0 +MS=90> OK> --> Modem initialized.> error: cannot set channels for capture: Invalid> argument> --> Sending: ATDT019479473047> --> Waiting for carrier.> ATDT019479473047> NO CARRIER> ERROR> --> No Carrier! Trying again.> error: cannot set channels for capture: Invalid> argument> --> Sending: ATDT019479473047> --> Waiting for carrier.> ATDT019479473047> NO CARRIER>>> Thanks for your help> F.>> __________________________________________________> Correo Yahoo!> Espacio para todos tus mensajes, antivirus y antispam ¡gratis!> Regístrate ya - http://correo.espanol.yahoo.com/>
