Claudio,
I am on travel with no time to read former mails.
Please excuse me if this has already been written.
If you are using wvdial to call your ISP, have you got a line
Carrier Check = no
in file /etc/wvdial.conf ?
Jacques
Claudio Bizzarri wrote:
I've tried with patched slmodemd. Now it can dial: after this command
slmodemd -c ITALY --alsa modem --debug
I can use minicom on /dev/ttyS0
Any dial command stop with "NO DIALTONE" error.
If I use ATX3 command I can dial (I can make ringing my GSM phone) but
if I try with my isp number I've got a lot of error (on slmodemd) and
a final NO CARRIER: this is last part of debug output
...
<350.832687> main: alsa xrun: recovered.
<350.832711> main: dev write = 0
<350.832723> main: alsa xrun: try to recover...
<350.856902> main: alsa xrun: recovered.
<350.856940> main: dev read = 0
<350.870338> main: alsa xrun: try to recover...
<350.892882> main: alsa xrun: recovered.
<350.892928> main: dev write = 0
<350.892937> main: alsa xrun: try to recover...
<350.917010> main: alsa xrun: recovered.
<350.917029> main: dev read = 0
<350.917045> main: alsa xrun: try to recover...
<350.941133> main: alsa xrun: recovered.
<350.941154> main: dev read = 0
<350.954578> modem: modem_update_status: 4
<350.954588> modem: --> FINISH.
<350.954592> modem: modem_hup...
<350.954596> modem: modem set state: 2 --> 9...
<350.954600> modem: new state: DP_DISC
<350.954604> modem: modem_stop..
<350.954608> main: alsa_stop...
<350.981449> modem: modem set hook: 1 --> 0...
<350.981471> main: alsa_ioctl: cmd 2, arg 0...
<350.989498> main: alsa_ioctl: cmd 8, arg 0...
<350.989732> modem: modem set state: 9 --> 1...
<350.989738> modem: new state: MODEM_IDLE
<350.989742> modem: modem report result: 3 (NO CARRIER)
My /proc/asound/pcm:
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1
2007/8/9, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>:
Ruben,
Wait for feedback from the other HDA+modem testers.
Just in case the failure is specific to your particular
ALC880 Analog hardware,
rather than a continuing slmodemd failure
MarvS
On 8/8/07, Rubens de Oliveira Jr <rboliver70@xxxxxxxxx> wrote:
Hi Marvin,
It is on 6 indeed:
cat /proc/asound/pcm
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-02: ALC880 Analog : ALC880 Analog : capture 2
00-01: ALC880 Digital : ALC880 Digital : playback 1
00-00: ALC880 Analog : ALC880 Analog : playback 1 : capture 2
