Hello, I can see my modem in the device administrator
but i dont know if is correct. I cannot to internet.
Thanks
Felipe Potes
Colombia
__________________________________________________
Correo Yahoo!
Espacio para todos tus mensajes, antivirus y antispam ¡gratis!
Regístrate ya - http://correo.espanol.yahoo.com/
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Ubuntu 6.10 kernel 2.6.17-10-generic
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686, Ubuntu 6.10
Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
scanModem update of: 2007_July_16
ALSAversion 1.0.11
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:01.6 1039:7013 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller
Modem interrupt assignment and sharing:
3: 1343 XT-PIC uhci_hcd:usb2, CS46XX
--- Bootup diagnostics for card in PCI slot 00:01.6 ----
[17179573.364000] ACPI: PCI Interrupt 0000:00:01.6[C] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
[17179573.364000] ACPI: PCI interrupt for device 0000:00:01.6 disabled
The PCI slot 00:01.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
PCIbus=00:01.6
00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) (prog-if 00 [Generic])
Flags: medium devsel, IRQ 3
I/O ports at d000 [size=256]
I/O ports at d400 [size=128]
Capabilities: <access denied>
CPU0
0: 550974 XT-PIC timer
1: 8234 XT-PIC i8042
2: 0 XT-PIC cascade
3: 1343 XT-PIC uhci_hcd:usb2, CS46XX
7: 1 XT-PIC parport0
8: 3 XT-PIC rtc
9: 1 XT-PIC acpi
10: 0 XT-PIC MPU401 UART
11: 4612463 XT-PIC uhci_hcd:usb1, ehci_hcd:usb3, eth0
12: 46921 XT-PIC i8042
14: 9961 XT-PIC ide0
15: 19503 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[17179569.184000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 255MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 65520
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 61424 pages, LIFO batch:15
[17179569.184000] DMI 2.2 present.
[17179569.184000] ACPI: RSDP (v000 AWARD ) @ 0x000f7c30
[17179569.184000] ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
[17179569.184000] ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
[17179569.184000] ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x5008
[17179569.184000] Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda2 ro quiet splash locale=es_ES
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (0120a000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[17179569.184000] Detected 1152.763 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.824000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.824000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[17179571.844000] Memory: 250216k/262080k available (1910k kernel code, 11288k reserved, 1070k data, 308k init, 0k highmem)
[17179571.844000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179571.924000] Calibrating delay using timer specific routine.. 2306.92 BogoMIPS (lpj=4613844)
[17179571.924000] Security Framework v1.0.0 initialized
[17179571.924000] SELinux: Disabled at boot.
[17179571.924000] Mount-cache hash table entries: 512
[17179571.924000] CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
[17179571.924000] CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
[17179571.924000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179571.924000] CPU: L2 Cache: 256K (64 bytes/line)
[17179571.924000] CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000420 00000000 00000000 00000000
[17179571.924000] Checking 'hlt' instruction... OK.
[17179571.940000] SMP alternatives: switching to UP code
[17179571.940000] Freeing SMP alternatives: 16k freed
[17179571.940000] checking if image is initramfs... it is
[17179572.764000] Freeing initrd memory: 5254k freed
[17179572.764000] ACPI: Core revision 20060707
[17179572.772000] ACPI: Looking for DSDT ... not found!
[17179572.772000] ACPI: setting ELCR to 0200 (from 0228)
[17179572.780000] CPU0: AMD Unknow CPU Type stepping 00
[17179572.780000] SMP motherboard not detected.
[17179572.780000] Local APIC not detected. Using dummy APIC emulation.
[17179572.780000] Brought up 1 CPUs
[17179572.780000] migration_cost=0
[17179572.784000] NET: Registered protocol family 16
[17179572.784000] EISA bus registered
[17179572.784000] ACPI: bus type pci registered
[17179572.800000] PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=1
[17179572.800000] PCI: Using configuration type 1
[17179572.800000] Setting up standard PCI resources
[17179572.836000] ACPI: Interpreter enabled
[17179572.836000] ACPI: Using PIC for interrupt routing
[17179572.836000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.836000] PCI: Probing PCI hardware (bus 00)
[17179572.836000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179572.840000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:00.1
[17179572.840000] Uncovering SIS18 that hid as a SIS503 (compatible=0)
[17179572.840000] Enabling SiS 96x SMBus.
[17179572.840000] Boot video device is 0000:01:00.0
[17179572.840000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.868000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179572.868000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[17179572.872000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[17179572.872000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179572.876000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.876000] pnp: PnP ACPI init
[17179572.884000] pnp: PnP ACPI: found 14 devices
[17179572.884000] PnPBIOS: Disabled by ACPI PNP
[17179572.884000] PCI: Using ACPI for IRQ routing
[17179572.884000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179572.920000] PCI: Bridge: 0000:00:02.0
[17179572.920000] IO window: disabled.
[17179572.920000] MEM window: dc000000-ddffffff
[17179572.920000] PREFETCH window: d0000000-d7ffffff
[17179572.920000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179572.920000] NET: Registered protocol family 2
[17179572.960000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[17179572.960000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[17179572.960000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[17179572.960000] TCP: Hash tables configured (established 8192 bind 4096)
[17179572.960000] TCP reno registered
[17179572.960000] audit: initializing netlink socket (disabled)
[17179572.960000] audit(1185445319.960:1): initialized
[17179572.960000] VFS: Disk quotas dquot_6.5.1
[17179572.960000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179572.960000] Initializing Cryptographic API
[17179572.960000] io scheduler noop registered
[17179572.960000] io scheduler anticipatory registered
[17179572.960000] io scheduler deadline registered
[17179572.960000] io scheduler cfq registered (default)
[17179572.960000] isapnp: Scanning for PnP cards...
[17179573.316000] isapnp: No Plug & Play device found
[17179573.360000] Real Time Clock Driver v1.12ac
[17179573.360000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179573.360000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.360000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.364000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
[17179573.364000] PCI: setting IRQ 3 as level-triggered
[17179573.364000] ACPI: PCI Interrupt 0000:00:01.6[C] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
[17179573.364000] ACPI: PCI interrupt for device 0000:00:01.6 disabled
[17179573.364000] mice: PS/2 mouse device common for all mice
[17179573.364000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.364000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.364000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.364000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179573.364000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179573.364000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.364000] EISA: Probing bus 0 at eisa.0
[17179573.364000] Cannot allocate resource for EISA slot 4
[17179573.364000] Cannot allocate resource for EISA slot 5
[17179573.364000] EISA: Detected 0 cards.
[17179573.364000] TCP bic registered
[17179573.364000] NET: Registered protocol family 1
[17179573.364000] NET: Registered protocol family 8
[17179573.364000] NET: Registered protocol family 20
[17179573.364000] Using IPI No-Shortcut mode
[17179573.368000] ACPI: (supports S0 S1 S4 S5)
[17179573.368000] Freeing unused kernel memory: 308k freed
[17179573.392000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.524000] Capability LSM initialized
[17179574.588000] ACPI: Fan [FAN] (on)
[17179574.596000] ACPI: Thermal Zone [THRM] (45 C)
[17179575.632000] SIS5513: IDE controller at PCI slot 0000:00:00.1
[17179575.632000] SIS5513: chipset revision 208
[17179575.632000] SIS5513: not 100% native mode: will probe irqs later
[17179575.632000] SIS5513: SiS730 ATA 100 (1st gen) controller
[17179575.632000] ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
[17179575.632000] ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio
[17179575.632000] Probing IDE interface ide0...
[17179575.920000] hda: WDC WD200EB-00BHF0, ATA DISK drive
[17179576.592000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.616000] Probing IDE interface ide1...
[17179577.356000] hdc: GCR-8521B, ATAPI CD/DVD-ROM drive
[17179578.028000] ide1 at 0x170-0x177,0x376 on irq 15
[17179578.044000] hda: max request size: 128KiB
[17179578.064000] hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
[17179578.064000] hda: cache flushes not supported
[17179578.064000] hda: hda1 hda2 hda3 < hda5 >
[17179578.140000] hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
[17179578.140000] Uniform CD-ROM driver Revision: 3.20
[17179578.488000] usbcore: registered new driver usbfs
[17179578.488000] usbcore: registered new driver hub
[17179578.488000] USB Universal Host Controller Interface driver v3.0
[17179578.492000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[17179578.492000] PCI: setting IRQ 11 as level-triggered
[17179578.492000] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179578.492000] PCI: Via IRQ fixup for 0000:00:09.0, from 9 to 11
[17179578.492000] uhci_hcd 0000:00:09.0: UHCI Host Controller
[17179578.492000] uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 1
[17179578.492000] uhci_hcd 0000:00:09.0: irq 11, io base 0x0000d800
[17179578.492000] usb usb1: configuration #1 chosen from 1 choice
[17179578.492000] hub 1-0:1.0: USB hub found
[17179578.492000] hub 1-0:1.0: 2 ports detected
[17179578.596000] ACPI: PCI Interrupt 0000:00:09.1[B] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
[17179578.596000] uhci_hcd 0000:00:09.1: UHCI Host Controller
[17179578.596000] uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 2
[17179578.596000] uhci_hcd 0000:00:09.1: irq 3, io base 0x0000dc00
[17179578.596000] usb usb2: configuration #1 chosen from 1 choice
[17179578.596000] hub 2-0:1.0: USB hub found
[17179578.596000] hub 2-0:1.0: 2 ports detected
[17179578.720000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[17179578.720000] ACPI: PCI Interrupt 0000:00:09.2[C] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179578.720000] ehci_hcd 0000:00:09.2: EHCI Host Controller
[17179578.720000] ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 3
[17179578.720000] ehci_hcd 0000:00:09.2: irq 11, io mem 0xdf100000
[17179578.720000] ehci_hcd 0000:00:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179578.720000] usb usb3: configuration #1 chosen from 1 choice
[17179578.720000] hub 3-0:1.0: USB hub found
[17179578.720000] hub 3-0:1.0: 4 ports detected
[17179578.908000] Attempting manual resume
[17179578.952000] kjournald starting. Commit interval 5 seconds
[17179578.952000] EXT3-fs: mounted filesystem with ordered data mode.
[17179579.660000] usb 3-3: new high speed USB device using ehci_hcd and address 3
[17179579.888000] usb 3-3: configuration #1 chosen from 1 choice
[17179580.136000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17179580.368000] usb 1-1: configuration #1 chosen from 1 choice
[17179593.824000] input: PC Speaker as /class/input/input1
[17179594.240000] parport: PnPBIOS parport detected.
[17179594.240000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179594.552000] FDC 0 is a post-1991 82077
[17179594.580000] Linux agpgart interface v0.101 (c) Dave Jones
[17179594.580000] agpgart: Detected SiS 730 chipset
[17179594.588000] agpgart: AGP aperture is 64M @ 0xd8000000
[17179594.780000] 8139too Fast Ethernet driver 0.9.27
[17179594.780000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179594.780000] eth0: RealTek RTL8139 at 0xd097a000, 00:d0:09:f2:7b:87, IRQ 11
[17179594.780000] eth0: Identified 8139 chip type 'RTL-8139C'
[17179594.832000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179594.912000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179594.956000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179595.212000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179595.272000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
[17179595.340000] ts: Compaq touchscreen protocol output
[17179595.456000] usbcore: registered new driver libusual
[17179595.504000] gameport: CS46xx Gameport is pci0000:00:0b.0/gameport0, speed 1028kHz
[17179595.524000] input: Analog 4-axis 4-button joystick as /class/input/input3
[17179595.740000] SCSI subsystem initialized
[17179595.744000] Initializing USB Mass Storage driver...
[17179595.744000] scsi0 : SCSI emulation for USB Mass Storage devices
[17179595.744000] usbcore: registered new driver usb-storage
[17179595.744000] USB Mass Storage support registered.
[17179595.744000] usb-storage: device found at 3
[17179595.744000] usb-storage: waiting for device to settle before scanning
[17179595.948000] eth0: link down
[17179596.216000] Linux video capture interface: v1.00
[17179596.264000] drivers/media/video/spca5xx/spca5xx-main.c: USB SPCA5XX camera found.Genius GF112 (PAC207-BCA)
[17179596.268000] usbcore: registered new driver spca5xx
[17179596.268000] drivers/media/video/spca5xx/spca5xx-main.c: spca5xx driver 00.57.08 registered
[17179596.516000] lp0: using parport0 (interrupt-driven).
[17179596.592000] Adding 417648k swap on /dev/disk/by-uuid/65639d3d-9f0f-4779-81c4-1d8e28ef5638. Priority:-1 extents:1 across:417648k
[17179596.684000] EXT3 FS on hda2, internal journal
[17179598.728000] ACPI: Power Button (FF) [PWRF]
[17179598.728000] ACPI: Power Button (CM) [PWRB]
[17179598.728000] ACPI: Sleep Button (CM) [FUTS]
[17179598.928000] ibm_acpi: ec object not found
[17179598.988000] pcc_acpi: loading...
[17179600.752000] usb-storage: device scan complete
[17179600.756000] Vendor: Kingston Model: DataTraveler 2.0 Rev: 1.00
[17179600.756000] Type: Direct-Access ANSI SCSI revision: 02
[17179600.804000] SCSI device sda: 1001472 512-byte hdwr sectors (513 MB)
[17179600.804000] sda: Write Protect is off
[17179600.804000] sda: Mode Sense: 0b 00 00 08
[17179600.804000] sda: assuming drive cache: write through
[17179600.816000] SCSI device sda: 1001472 512-byte hdwr sectors (513 MB)
[17179600.816000] sda: Write Protect is off
[17179600.816000] sda: Mode Sense: 0b 00 00 08
[17179600.816000] sda: assuming drive cache: write through
[17179600.816000] sda: sda1
[17179600.820000] sd 0:0:0:0: Attached scsi removable disk sda
[17179600.856000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179604.032000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179604.032000] apm: overridden by ACPI.
[17179610.444000] Bluetooth: Core ver 2.8
[17179610.444000] NET: Registered protocol family 31
[17179610.444000] Bluetooth: HCI device and connection manager initialized
[17179610.444000] Bluetooth: HCI socket layer initialized
[17179610.480000] Bluetooth: L2CAP ver 2.8
[17179610.480000] Bluetooth: L2CAP socket layer initialized
[17179610.500000] Bluetooth: RFCOMM socket layer initialized
[17179610.500000] Bluetooth: RFCOMM TTY layer initialized
[17179610.500000] Bluetooth: RFCOMM ver 1.7
[17179619.056000] NET: Registered protocol family 10
[17179619.056000] lo: Disabled Privacy Extensions
[17179619.056000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17179619.056000] IPv6 over IPv4 tunneling driver
[17179624.832000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
