Please uninstall the hsfmodem package as it can interfere with the
alternative support.
Then Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD-1.0.13.tar.gz having a compiled slmodemd. Unpack under Lin
ux with:
$ tar zxf SLMODEMD-1.0.13.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt therein
On 7/11/07, Farrell Swain <f.swainjr@xxxxxxxxx> wrote:
> Dear Sir:
>
> I have tried buying a soft driver for my modem, After
> doing scanmodem again I ran unloading like the
> suggestions say. I had to re=load Ubuntu. I haven't
> did scan moden but did reload the driver from
> Linuxant. Either I don't save the command right but I
> get a bash with "pci=routirq" and 'pollirq'.
>
> Here are the files.
>
> Modemdata:
>
> Only plain text email is forwarded by the
> DISCUSS@xxxxxxxxxxxxx List Server.
> Do use the following as the email Subject Line:
> SomeName, YourCountry Ubuntu 7.04 kernel
> 2.6.20-15-generic
> This will alert cogent experts, and distinguish
> cases in the Archives.
> YourCountry will enable Country Code guidance.
> Occassionally responses are blocked by an Internet
> Provider mail filters.
> So in a day, also check the Archived responses at
> http://www.linmodems.org .
> Local Linux experts can be found through:
> http://www.linux.org/groups/index.html
> -------------------------- System information
> ----------------------------
> CPU=i686, Ubuntu 7.04
> Linux version 2.6.20-15-generic (root@palmer) (gcc
> version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr
> 15 07:36:31 UTC 2007
> scanModem update of: 2007_June_19
> The modem symbolic link is /dev/modem -> ttySHSF0
>
> ALSAversion 1.0.13
> USB modem not detected by lsusb
>
> Modem or host audio card candidates have firmware
> information:
>
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 00:02.6 1039:7013 1025:0083 Modem: Silicon Integrated
> Systems [SiS] AC'97 Modem Controller
>
> Modem interrupt assignment and sharing:
> 17: 3220 IO-APIC-fasteoi SiS SI7012
>
> --- Bootup diagnositcs for card in PCI slot 00:02.6
> ----
> [ 12.251148] ACPI: PCI Interrupt 0000:00:02.6[C] ->
> GSI 18 (level, low) -> IRQ 17
> [ 12.251156] ACPI: PCI interrupt for device
> 0000:00:02.6 disabled
> [ 23.032000] ACPI: PCI Interrupt 0000:00:02.6[C] ->
> GSI 18 (level, low) -> IRQ 17
> [ 24.212000] ACPI: PCI interrupt for device
> 0000:00:02.6 disabled
> [ 24.212000] hsfmc97sis: probe of 0000:00:02.6
> failed with error -5
>
> The PCI slot 00:02.6 of the modem card may be
> disabled early in
> a bootup process, but then enabled later. If modem
> drivers load
> but the modem is not responsive, read Bootup.txt
> about possible fixes.
> Send dmesg.txt along with ModemData.txt to
> discuss@xxxxxxxxxxxxx
> if help is needed.
>
>
> === Finished modem firmware and bootup diagnostics
> section. ===
> === Next deducing cogent software ===
>
> dmegs.txt
>
> CPU0
> 0: 405219 IO-APIC-edge timer
> 1: 56 IO-APIC-edge i8042
> 8: 3 IO-APIC-edge rtc
> 11: 1320 IO-APIC-fasteoi acpi
> 12: 187636 IO-APIC-edge i8042
> 14: 15699 IO-APIC-edge ide0
> 15: 14160 IO-APIC-edge ide1
> 16: 1 IO-APIC-fasteoi yenta, eth0
> 17: 3220 IO-APIC-fasteoi SiS SI7012
> 19: 19884 IO-APIC-fasteoi ohci_hcd:usb1
> 20: 0 IO-APIC-fasteoi ohci_hcd:usb2
> 21: 1357 IO-APIC-fasteoi ehci_hcd:usb3
> NMI: 0
> LOC: 405097
> ERR: 0
> MIS: 0
>
> [ 0.000000] Linux version 2.6.20-15-generic
> (root@palmer) (gcc version 4.1.2 (Ubuntu
> 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007
> (Ubuntu 2.6.20-15.27-generic)
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] sanitize start
> [ 0.000000] sanitize end
> [ 0.000000] copy_e820_map() start: 0000000000000000
> size: 000000000009f400 end: 000000000009f400 type: 1
> [ 0.000000] copy_e820_map() type is E820_RAM
> [ 0.000000] copy_e820_map() start: 000000000009f400
> size: 0000000000000c00 end: 00000000000a0000 type: 2
> [ 0.000000] copy_e820_map() start: 00000000000dc000
> size: 0000000000024000 end: 0000000000100000 type: 2
> [ 0.000000] copy_e820_map() start: 0000000000100000
> size: 000000000bdf0000 end: 000000000bef0000 type: 1
> [ 0.000000] copy_e820_map() type is E820_RAM
> [ 0.000000] copy_e820_map() start: 000000000bef0000
> size: 000000000000a000 end: 000000000befa000 type: 3
> [ 0.000000] copy_e820_map() start: 000000000befa000
> size: 0000000000006000 end: 000000000bf00000 type: 4
> [ 0.000000] copy_e820_map() start: 000000000bf00000
> size: 0000000004100000 end: 0000000010000000 type: 2
> [ 0.000000] copy_e820_map() start: 00000000fff00000
> size: 0000000000100000 end: 0000000100000000 type: 2
> [ 0.000000] BIOS-e820: 0000000000000000 -
> 000000000009f400 (usable)
> [ 0.000000] BIOS-e820: 000000000009f400 -
> 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000dc000 -
> 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 -
> 000000000bef0000 (usable)
> [ 0.000000] BIOS-e820: 000000000bef0000 -
> 000000000befa000 (ACPI data)
> [ 0.000000] BIOS-e820: 000000000befa000 -
> 000000000bf00000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 000000000bf00000 -
> 0000000010000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fff00000 -
> 0000000100000000 (reserved)
> [ 0.000000] 0MB HIGHMEM available.
> [ 0.000000] 190MB LOWMEM available.
> [ 0.000000] found SMP MP-table at 000f7fd0
> [ 0.000000] Entering add_active_range(0, 0, 48880)
> 0 entries of 256 used
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0 -> 4096
> [ 0.000000] Normal 4096 -> 48880
> [ 0.000000] HighMem 48880 -> 48880
> [ 0.000000] early_node_map[1] active PFN ranges
> [ 0.000000] 0: 0 -> 48880
> [ 0.000000] On node 0 totalpages: 48880
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
> [ 0.000000] Normal zone: 349 pages used for
> memmap
> [ 0.000000] Normal zone: 44435 pages, LIFO
> batch:7
> [ 0.000000] HighMem zone: 0 pages used for memmap
> [ 0.000000] DMI present.
> [ 0.000000] ACPI: RSDP (v000 PTLTD
> ) @ 0x000f7f60
> [ 0.000000] ACPI: RSDT (v001 PTLTD RSDT
> 0x06040000 LTP 0x00000000) @ 0x0bef61be
> [ 0.000000] ACPI: FADT (v001 SiS 755F
> 0x06040000 PTL 0x000f4240) @ 0x0bef9e5f
> [ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW
> 0x06040000 LTP 0x00000001) @ 0x0bef9ed3
> [ 0.000000] ACPI: MADT (v001 PTLTD APIC
> 0x06040000 LTP 0x00000000) @ 0x0bef9f88
> [ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$
> 0x06040000 LTP 0x00000001) @ 0x0bef9fd8
> [ 0.000000] ACPI: DSDT (v001 PTLTD 755
> 0x06040000 MSFT 0x0100000e) @ 0x00000000
> [ 0.000000] ACPI: PM-Timer IO Port: 0x8008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00]
> lapic_id[0x00] enabled)
> [ 0.000000] Processor #0 15:12 APIC version 16
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high
> edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x01]
> address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 1, version 17,
> address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0
> global_irq 2 high edge)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ11 used by override.
> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O
> APICs
> [ 0.000000] Using ACPI (MADT) for SMP configuration
> information
> [ 0.000000] Allocating PCI resources starting at
> 20000000 (gap: 10000000:eff00000)
> [ 0.000000] Detected 1600.132 MHz processor.
> [ 10.068490] Built 1 zonelists. Total pages: 48499
> [ 10.068494] Kernel command line:
> root=UUID=ffc90681-9ee3-4831-a36e-6b150e258a2b ro
> quiet splash
> [ 10.068653] mapped APIC to ffffd000 (fee00000)
> [ 10.068656] mapped IOAPIC to ffffc000 (fec00000)
> [ 10.068660] Enabling fast FPU save and restore...
> done.
> [ 10.068663] Enabling unmasked SIMD FPU exception
> support... done.
> [ 10.068673] Initializing CPU#0
> [ 10.068727] PID hash table entries: 1024 (order:
> 10, 4096 bytes)
> [ 10.069502] Console: colour VGA+ 80x25
> [ 10.069629] Dentry cache hash table entries: 32768
> (order: 5, 131072 bytes)
> [ 10.069740] Inode-cache hash table entries: 16384
> (order: 4, 65536 bytes)
> [ 10.073887] Memory: 182848k/195520k available
> (1992k kernel code, 12212k reserved, 893k data, 328k
> init, 0k highmem)
> [ 10.073899] virtual kernel memory layout:
> [ 10.073900] fixmap : 0xfff4e000 - 0xfffff000
> ( 708 kB)
> [ 10.073902] pkmap : 0xff800000 - 0xffc00000
> (4096 kB)
> [ 10.073903] vmalloc : 0xcc800000 - 0xff7fe000
> ( 815 MB)
> [ 10.073905] lowmem : 0xc0000000 - 0xcbef0000
> ( 190 MB)
> [ 10.073906] .init : 0xc03d7000 - 0xc0429000
> ( 328 kB)
> [ 10.073908] .data : 0xc02f2264 - 0xc03d16d4
> ( 893 kB)
> [ 10.073909] .text : 0xc0100000 - 0xc02f2264
> (1992 kB)
> [ 10.073913] Checking if this processor honours the
> WP bit even in supervisor mode... Ok.
> [ 10.152608] Calibrating delay using timer specific
> routine.. 3201.94 BogoMIPS (lpj=6403897)
> [ 10.152652] Security Framework v1.0.0 initialized
> [ 10.152658] SELinux: Disabled at boot.
> [ 10.152675] Mount-cache hash table entries: 512
> [ 10.152805] CPU: After generic identify, caps:
> 078bfbff c3d3fbff 00000000 00000000 00000001 00000000
> 00000001
> [ 10.152814] CPU: L1 I Cache: 64K (64 bytes/line), D
> cache 64K (64 bytes/line)
> [ 10.152817] CPU: L2 Cache: 256K (64 bytes/line)
> [ 10.152820] CPU: After all inits, caps: 078bfbff
> c3d3fbff 00000000 00000410 00000001 00000000 00000001
> [ 10.152830] Compat vDSO mapped to ffffe000.
> [ 10.152834] Remapping vsyscall page to ffffe000
> [ 10.152844] Checking 'hlt' instruction... OK.
> [ 10.168713] SMP alternatives: switching to UP code
> [ 10.168961] Freeing SMP alternatives: 11k freed
> [ 10.169219] Early unpacking initramfs... done
> [ 10.513906] ACPI: Core revision 20060707
> [ 10.514151] ACPI: Looking for DSDT in initramfs...
> file /DSDT.aml not found, using machine DSDT.
> [ 10.518322] CPU0: AMD Mobile AMD Sempron(tm)
> Processor 2800+ stepping 02
> [ 10.518342] Total of 1 processors activated
> (3201.94 BogoMIPS).
> [ 10.518497] ENABLING IO-APIC IRQs
> [ 10.518697] ..TIMER: vector=0x31 apic1=0 pin1=2
> apic2=-1 pin2=-1
> [ 10.663901] Brought up 1 CPUs
> [ 10.664149] Booting paravirtualized kernel on bare
> hardware
> [ 10.664226] Time: 1:02:00 Date: 06/11/107
> [ 10.664260] NET: Registered protocol family 16
> [ 10.664349] EISA bus registered
> [ 10.664353] ACPI: bus type pci registered
> [ 10.664497] PCI: PCI BIOS revision 2.10 entry at
> 0xfd776, last bus=1
> [ 10.664499] PCI: Using configuration type 1
> [ 10.664501] Setting up standard PCI resources
> [ 10.667194] ACPI: Interpreter enabled
> [ 10.667198] ACPI: Using IOAPIC for interrupt
> routing
> [ 10.667548] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 10.667553] PCI: Probing PCI hardware (bus 00)
> [ 10.668779] Enabling SiS 96x SMBus.
> [ 10.669183] Boot video device is 0000:01:00.0
> [ 10.669247] ACPI: PCI Interrupt Routing Table
> [\_SB_.PCI0._PRT]
> [ 10.690643] ACPI: PCI Interrupt Link [LNKA] (IRQs 3
> 4 5 *7 9 10 11)
> [ 10.690842] ACPI: PCI Interrupt Link [LNKB] (IRQs 3
> *4 5 7 9 10 11)
> [ 10.691035] ACPI: PCI Interrupt Link [LNKC] (IRQs 3
> 4 *5 7 9 10 11)
> [ 10.691226] ACPI: PCI Interrupt Link [LNKD] (IRQs
> *3 4 5 7 9 10 11)
> [ 10.691438] ACPI: PCI Interrupt Link [LNKE] (IRQs 3
> 4 5 7 *9 10 11)
> [ 10.691630] ACPI: PCI Interrupt Link [LNKF] (IRQs 3
> 4 5 7 9 10 *11)
> [ 10.691830] ACPI: PCI Interrupt Link [LNKG] (IRQs 3
> 4 5 7 9 10 11) *0, disabled.
> [ 10.692020] ACPI: PCI Interrupt Link [LNKH] (IRQs 3
> 4 5 7 9 *10 11)
> [ 10.692337] Linux Plug and Play Support v0.97 (c)
> Adam Belay
> [ 10.692348] pnp: PnP ACPI init
> [ 10.694199] pnp: PnP ACPI: found 8 devices
> [ 10.694204] PnPBIOS: Disabled by ACPI PNP
> [ 10.694259] PCI: Using ACPI for IRQ routing
> [ 10.694262] PCI: If a device doesn't work, try
> "pci=routeirq". If it helps, post a report
> [ 10.696496] NET: Registered protocol family 8
> [ 10.696498] NET: Registered protocol family 20
> [ 10.696654] pnp: 00:04: ioport range 0x8000-0x807f
> could not be reserved
> [ 10.696658] pnp: 00:04: ioport range 0x8080-0x80ff
> has been reserved
> [ 10.696661] pnp: 00:04: ioport range 0x8100-0x811f
> has been reserved
> [ 10.696664] pnp: 00:04: ioport range 0x4d0-0x4d1
> has been reserved
> [ 10.696932] PCI: Ignore bogus resource 6 [0:0] of
> 0000:01:00.0
> [ 10.696935] PCI: Bridge: 0000:00:01.0
> [ 10.696938] IO window: a000-afff
> [ 10.696942] MEM window: e2100000-e21fffff
> [ 10.696946] PREFETCH window: e8000000-efffffff
> [ 10.696951] PCI: Bus 2, cardbus bridge:
> 0000:00:06.0
> [ 10.696953] IO window: 00002400-000024ff
> [ 10.696957] IO window: 00002800-000028ff
> [ 10.696961] PREFETCH window: 20000000-23ffffff
> [ 10.696965] MEM window: 24000000-27ffffff
> [ 10.696982] PCI: Enabling device 0000:00:06.0 (0000
> -> 0003)
> [ 10.696993] ACPI: PCI Interrupt 0000:00:06.0[A] ->
> GSI 19 (level, low) -> IRQ 16
> [ 10.697035] NET: Registered protocol family 2
> [ 10.731842] IP route cache hash table entries: 2048
> (order: 1, 8192 bytes)
> [ 10.731934] TCP established hash table entries:
> 8192 (order: 4, 65536 bytes)
> [ 10.732001] TCP bind hash table entries: 4096
> (order: 3, 32768 bytes)
> [ 10.732034] TCP: Hash tables configured
> (established 8192 bind 4096)
> [ 10.732037] TCP reno registered
> [ 10.743864] checking if image is initramfs... it is
> [ 11.428912] Freeing initrd memory: 6780k freed
> [ 11.429106] Simple Boot Flag at 0x38 set to 0x1
> [ 11.429399] audit: initializing netlink socket
> (disabled)
> [ 11.429414] audit(1184115720.440:1): initialized
> [ 11.429551] VFS: Disk quotas dquot_6.5.1
> [ 11.429574] Dquot-cache hash table entries: 1024
> (order 0, 4096 bytes)
> [ 11.429630] io scheduler noop registered
> [ 11.429633] io scheduler anticipatory registered
> [ 11.429635] io scheduler deadline registered
> [ 11.429649] io scheduler cfq registered (default)
> [ 11.866251] isapnp: Scanning for PnP cards...
> [ 12.219164] isapnp: No Plug & Play device found
> [ 12.250327] Real Time Clock Driver v1.12ac
> [ 12.250369] Serial: 8250/16550 driver $Revision:
> 1.90 $ 4 ports, IRQ sharing enabled
> [ 12.251148] ACPI: PCI Interrupt 0000:00:02.6[C] ->
> GSI 18 (level, low) -> IRQ 17
> [ 12.251156] ACPI: PCI interrupt for device
> 0000:00:02.6 disabled
> [ 12.251226] mice: PS/2 mouse device common for all
> mice
> [ 12.251731] RAMDISK driver initialized: 16 RAM
> disks of 65536K size 1024 blocksize
> [ 12.251971] input: Macintosh mouse button emulation
> as /class/input/input0
> [ 12.252006] Uniform Multi-Platform E-IDE driver
> Revision: 7.00alpha2
> [ 12.252010] ide: Assuming 33MHz system bus speed
> for PIO modes; override with idebus=xx
> [ 12.252223] PNP: PS/2 Controller
> [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> [ 12.256538] serio: i8042 KBD port at 0x60,0x64 irq
> 1
> [ 12.256544] serio: i8042 AUX port at 0x60,0x64 irq
> 12
> [ 12.256687] EISA: Probing bus 0 at eisa.0
> [ 12.256697] Cannot allocate resource for EISA slot
> 1
> [ 12.256699] Cannot allocate resource for EISA slot
> 2
> [ 12.256719] Cannot allocate resource for EISA slot
> 8
> [ 12.256721] EISA: Detected 0 cards.
> [ 12.286768] TCP cubic registered
> [ 12.286777] NET: Registered protocol family 1
> [ 12.286803] Using IPI No-Shortcut mode
> [ 12.286858] ACPI: (supports S0 S3 S4 S5)
> [ 12.286894] Magic number: 15:893:2
> [ 12.286910] hash matches device ttybd
> [ 12.287319] Freeing unused kernel memory: 328k
> freed
> [ 12.289465] Time: tsc clocksource has been
> installed.
> [ 12.303843] input: AT Translated Set 2 keyboard as
> /class/input/input1
> [ 13.522929] Capability LSM initialized
> [ 13.562304] ACPI: CPU0 (power states: C1[C1] C2[C2]
> C3[C3])
> [ 13.566093] ACPI: Thermal Zone [THRM] (49 C)
> [ 14.082469] SIS5513: IDE controller at PCI slot
> 0000:00:02.5
> [ 14.082488] ACPI: PCI Interrupt 0000:00:02.5[A] ->
> GSI 16 (level, low) -> IRQ 18
> [ 14.082498] SIS5513: chipset revision 0
> [ 14.082501] SIS5513: not 100% native mode: will
> probe irqs later
> [ 14.082514] SIS5513: SiS 962/963 MuTIOL IDE UDMA133
> controller
> [ 14.082528] ide0: BM-DMA at 0x2000-0x2007, BIOS
> settings: hda:DMA, hdb:pio
> [ 14.082539] ide1: BM-DMA at 0x2008-0x200f, BIOS
> settings: hdc:DMA, hdd:pio
> [ 14.082547] Probing IDE interface ide0...
> [ 14.115272] usbcore: registered new interface
> driver usbfs
> [ 14.115296] usbcore: registered new interface
> driver hub
> [ 14.115320] usbcore: registered new device driver
> usb
> [ 14.116114] ohci_hcd: 2006 August 04 USB 1.1 'Open'
> Host Controller (OHCI) Driver
> [ 14.150187] sis900.c: v1.08.10 Apr. 2 2006
> [ 3.756000] Time: acpi_pm clocksource has been
> installed.
> [ 3.848000] hda: ST9402113A, ATA DISK drive
> [ 4.520000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [ 4.536000] Probing IDE interface ide1...
> [ 5.272000] hdc: Slimtype COMBO SOSC-2483K, ATAPI
> CD/DVD-ROM drive
> [ 5.944000] ide1 at 0x170-0x177,0x376 on irq 15
> [ 5.956000] SCSI subsystem initialized
> [ 5.964000] ACPI: PCI Interrupt 0000:00:03.0[A] ->
> GSI 20 (level, low) -> IRQ 19
> [ 5.964000] ohci_hcd 0000:00:03.0: OHCI Host
> Controller
> [ 5.964000] ohci_hcd 0000:00:03.0: new USB bus
> registered, assigned bus number 1
> [ 5.964000] ohci_hcd 0000:00:03.0: irq 19, io mem
> 0xe2002000
> [ 5.964000] libata version 2.20 loaded.
> [ 6.020000] usb usb1: configuration #1 chosen from
> 1 choice
> [ 6.020000] hub 1-0:1.0: USB hub found
> [ 6.020000] hub 1-0:1.0: 3 ports detected
> [ 6.124000] ACPI: PCI Interrupt 0000:00:03.1[B] ->
> GSI 21 (level, low) -> IRQ 20
> [ 6.124000] ohci_hcd 0000:00:03.1: OHCI Host
> Controller
> [ 6.124000] ohci_hcd 0000:00:03.1: new USB bus
> registered, assigned bus number 2
> [ 6.124000] ohci_hcd 0000:00:03.1: irq 20, io mem
> 0xe2003000
> [ 6.180000] usb usb2: configuration #1 chosen from
> 1 choice
> [ 6.180000] hub 2-0:1.0: USB hub found
> [ 6.180000] hub 2-0:1.0: 3 ports detected
> [ 6.284000] ACPI: PCI Interrupt 0000:00:03.2[D] ->
> GSI 23 (level, low) -> IRQ 21
> [ 6.284000] ehci_hcd 0000:00:03.2: EHCI Host
> Controller
> [ 6.284000] ehci_hcd 0000:00:03.2: new USB bus
> registered, assigned bus number 3
> [ 6.284000] PCI: cache line size of 64 is not
> supported by device 0000:00:03.2
> [ 6.284000] ehci_hcd 0000:00:03.2: irq 21, io mem
> 0xe2004000
> [ 6.284000] ehci_hcd 0000:00:03.2: USB 2.0 started,
> EHCI 1.00, driver 10 Dec 2004
> [ 6.284000] usb usb3: configuration #1 chosen from
> 1 choice
> [ 6.284000] hub 3-0:1.0: USB hub found
> [ 6.284000] hub 3-0:1.0: 6 ports detected
> [ 6.388000] ACPI: PCI Interrupt 0000:00:04.0[A] ->
> GSI 19 (level, low) -> IRQ 16
> [ 6.392000] 0000:00:04.0: Realtek RTL8201 PHY
> transceiver found at address 13.
> [ 6.396000] 0000:00:04.0: Using transceiver found
> at address 13 as default
> [ 6.400000] eth0: SiS 900 PCI Fast Ethernet at
> 0x1800, IRQ 16, 00:c0:9f:9f:0f:f3.
> [ 6.408000] hda: max request size: 512KiB
> [ 6.412000] hda: 78140160 sectors (40007 MB)
> w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
> [ 6.416000] hda: cache flushes supported
> [ 6.416000] hda: hda1 hda2 < hda5 >
> [ 6.472000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive,
> 2048kB Cache, UDMA(33)
> [ 6.472000] Uniform CD-ROM driver Revision: 3.20
> [ 6.784000] kjournald starting. Commit interval 5
> seconds
> [ 6.784000] EXT3-fs: mounted filesystem with
> ordered data mode.
> [ 6.972000] usb 1-2: new low speed USB device using
> ohci_hcd and address 3
> [ 7.172000] usb 1-2: configuration #1 chosen from 1
> choice
> [ 22.632000] pci_hotplug: PCI Hot Plug PCI Core
> version: 0.5
> [ 22.640000] shpchp: Standard Hot Plug PCI
> Controller Driver version: 0.4
> [ 22.656000] ieee80211_crypt: registered algorithm
> 'NULL'
> [ 22.656000] ieee80211: 802.11
> data/management/control stack, git-1.1.13
> [ 22.656000] ieee80211: Copyright (C) 2004-2005
> Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
> [ 22.672000] Yenta: CardBus bridge found at
> 0000:00:06.0 [1025:0083]
> [ 22.672000] Yenta: Using CSCINT to route CSC
> interrupts to PCI
> [ 22.672000] Yenta: Routing CardBus interrupts to
> PCI
> [ 22.672000] Yenta TI: socket 0000:00:06.0, mfunc
> 0x00521d22, devctl 0x64
> [ 22.788000] hsfengine: module license 'see LICENSE
> file distributed with driver' taints kernel.
> [ 22.904000] Yenta: ISA IRQ mask 0x06f8, PCI irq 16
> [ 22.904000] Socket status: 30000006
> [ 22.920000] Linux agpgart interface v0.102 (c) Dave
> Jones
> [ 22.944000] agpgart: Detected AGP bridge 0
> [ 22.948000] agpgart: AGP aperture is 32M @
> 0xe0000000
> [ 23.032000] ACPI: PCI Interrupt 0000:00:02.6[C] ->
> GSI 18 (level, low) -> IRQ 17
> [ 23.372000] bcm43xx driver
> [ 23.444000] input: PC Speaker as
> /class/input/input2
> [ 23.660000] Synaptics Touchpad, model: 1, fw: 5.9,
> id: 0x126eb1, caps: 0xa04713/0x4000
> [ 23.700000] input: SynPS/2 Synaptics TouchPad as
> /class/input/input3
> [ 24.176000] HSF: ERROR: SILICON Laboratories or
> LUCENT AC97 modem detected!<3>
> [ 24.176000] HSF: ERROR: This driver only supports
> CONEXANT devices<3>
> [ 24.176000] HSF: ERROR: not a Conexant modem<3>
> [ 24.212000] cnxthsf_cnxt_serial_add: ComCtrlOpen
> failed (1)
> [ 24.212000] ACPI: PCI interrupt for device
> 0000:00:02.6 disabled
> [ 24.212000] hsfmc97sis: probe of 0000:00:02.6
> failed with error -5
> [ 24.212000] ACPI: PCI Interrupt 0000:00:0b.0[A] ->
> GSI 17 (level, low) -> IRQ 22
> [ 24.224000] sis96x_smbus 0000:00:02.1: SiS96x SMBus
> base address: 0x8100
> [ 24.356000] usbcore: registered new interface
> driver hiddev
> [ 24.416000] cs: IO port probe 0x100-0x3af: clean.
> [ 24.420000] cs: IO port probe 0x3e0-0x4ff:
> excluding 0x480-0x48f
> [ 24.420000] cs: IO port probe 0x820-0x8ff: clean.
> [ 24.420000] cs: IO port probe 0xc00-0xcf7: clean.
> [ 24.420000] cs: IO port probe 0xa00-0xaff: clean.
> [ 24.496000] input: HID 062a:0000 as
> /class/input/input4
> [ 24.496000] input: USB HID v1.10 Mouse [HID
> 062a:0000] on usb-0000:00:03.0-2
> [ 24.496000] usbcore: registered new interface
> driver usbhid
> [ 24.496000] drivers/usb/input/hid-core.c: v2.6:USB
> HID core driver
> [ 24.760000] ACPI: PCI Interrupt 0000:00:02.7[C] ->
> GSI 18 (level, low) -> IRQ 17
> [ 25.580000] intel8x0_measure_ac97_clock: measured
> 55464 usecs
> [ 25.580000] intel8x0: clocking to 48000
> [ 25.728000] lp: driver loaded but no devices found
> [ 25.804000] Adding 554200k swap on
> /dev/disk/by-uuid/86ba4a0e-5412-429f-b6dc-beaf4f2c45e0.
> Priority:-1 extents:1 across:554200k
> [ 25.972000] EXT3 FS on hda1, internal journal
> [ 26.924000] ibm_acpi: ec object not found
> [ 27.012000] ACPI: Battery Slot [BAT1] (battery
> present)
> [ 27.028000] No dock devices found.
> [ 27.072000] ACPI: AC Adapter [ACAD] (on-line)
> [ 27.120000] Using specific hotkey driver
> [ 27.204000] input: Power Button (FF) as
> /class/input/input5
> [ 27.212000] ACPI: Power Button (FF) [PWRF]
> [ 27.244000] input: Lid Switch as
> /class/input/input6
> [ 27.248000] ACPI: Lid Switch [LID]
> [ 27.284000] input: Power Button (CM) as
> /class/input/input7
> [ 27.288000] ACPI: Power Button (CM) [PWRB]
> [ 27.320000] input: Sleep Button (CM) as
> /class/input/input8
> [ 27.324000] ACPI: Sleep Button (CM) [SLPB]
> [ 27.368000] pcc_acpi: loading...
> [ 27.636000] powernow-k8: Found 1 Mobile AMD
> Sempron(tm) Processor 2800+ processors (version
> 2.00.00)
> [ 27.636000] powernow-k8: 0 : fid 0x8 (1600 MHz),
> vid 0xa
> [ 27.636000] powernow-k8: 1 : fid 0x0 (800 MHz),
> vid 0x13
> [ 31.920000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 34.064000] ppdev: user-space parallel port driver
> [ 36.492000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 36.548000] eth0: Media Link Off
> [ 36.712000] apm: BIOS not found.
> [ 36.960000] Bluetooth: Core ver 2.11
> [ 36.960000] NET: Registered protocol family 31
> [ 36.960000] Bluetooth: HCI device and connection
> manager initialized
> [ 36.960000] Bluetooth: HCI socket layer initialized
> [ 37.008000] Bluetooth: L2CAP ver 2.8
> [ 37.008000] Bluetooth: L2CAP socket layer
> initialized
> [ 37.068000] Bluetooth: RFCOMM socket layer
> initialized
> [ 37.068000] Bluetooth: RFCOMM TTY layer initialized
> [ 37.068000] Bluetooth: RFCOMM ver 1.8
> [ 62.476000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 85.716000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 108.964000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 132.208000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 141.656000] NET: Registered protocol family 10
> [ 141.656000] lo: Disabled Privacy Extensions
> [ 141.656000] ADDRCONF(NETDEV_UP): eth0: link is not
> ready
> [ 155.428000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 279.880000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 297.576000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 298.328000] PPP generic driver version 2.4.2
> [ 301.124000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 301.176000] eth0: Media Link Off
> [ 301.176000] ADDRCONF(NETDEV_UP): eth0: link is not
> ready
> [ 313.592000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 316.828000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 316.884000] eth0: Media Link Off
> [ 316.884000] ADDRCONF(NETDEV_UP): eth0: link is not
> ready
> [ 340.156000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 363.972000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 487.416000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 610.676000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 636.036000] Linux video capture interface: v2.00
> [ 733.916000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 857.144000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 980.488000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 1104.572000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 1228.124000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 1259.752000] usb 3-6: new high speed USB device
> using ehci_hcd and address 3
> [ 1259.884000] usb 3-6: configuration #1 chosen from 1
> choice
> [ 1260.556000] usbcore: registered new interface
> driver libusual
> [ 1260.820000] Initializing USB Mass Storage driver...
> [ 1260.820000] scsi0 : SCSI emulation for USB Mass
> Storage devices
> [ 1260.820000] usb-storage: device found at 3
> [ 1260.820000] usb-storage: waiting for device to
> settle before scanning
> [ 1260.820000] usbcore: registered new interface
> driver usb-storage
> [ 1260.820000] USB Mass Storage support registered.
> [ 1265.820000] usb-storage: device scan complete
> [ 1265.820000] scsi 0:0:0:0: Direct-Access SanDisk
> U3 Cruzer Micro 3.27 PQ: 0 ANSI: 2
> [ 1265.888000] SCSI device sda: 8015502 512-byte hdwr
> sectors (4104 MB)
> [ 1265.888000] sda: Write Protect is off
> [ 1265.888000] sda: Mode Sense: 03 00 00 00
> [ 1265.888000] sda: assuming drive cache: write
> through
> [ 1265.892000] SCSI device sda: 8015502 512-byte hdwr
> sectors (4104 MB)
> [ 1265.892000] sda: Write Protect is off
> [ 1265.892000] sda: Mode Sense: 03 00 00 00
> [ 1265.892000] sda: assuming drive cache: write
> through
> [ 1265.892000] sda: sda1
> [ 1265.896000] sd 0:0:0:0: Attached scsi removable
> disk sda
> [ 1265.908000] sd 0:0:0:0: Attached scsi generic sg0
> type 0
> [ 1351.568000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 1474.796000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
> [ 1598.060000] bcm43xx: Error: Microcode
> "bcm43xx_microcode5.fw" not available or load failed.
>
> Thank-you
>
> Farrell "Butch" Swain
> May God bring you to His fulfulment
> f.swainjr@xxxxxxxxx
>
