Darwin
Driver Description
HDAUDIO Soft Data Fax Modem with SmartCP
Driver Date 06-03-27
Driver Version 7.33.0.52
Driver Provider CXT
--------
CXT specfies a ConeXanT chipset requiring without alternative:
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem_VersionSpec_k2.6.20-15-generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
MarvS
scanModem maintainer
On 5/26/07, darwin <darwin.jkt@xxxxxxxxx> wrote:
how to setup modem?
HDAUDIO Soft Data Fax Modem with SmartCP 5.1.2535.0
Driver Description
HDAUDIO Soft Data Fax Modem with SmartCP
Driver Date 06-03-27
Driver Version 7.33.0.52
Driver Provider CXT
INF File oem9.inf
Hardware ID HDAUDIO\FUNC_02&VEN_14F1&DEV_5047&SUBSYS_103C30B2&REV_1000
Location Information Internal High Definition Audio Bus
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Ubuntu 7.04 kernel 2.6.20-15-generic
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686, Ubuntu 7.04
Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007
scanModem update of: 2007_May_11
ALSAversion 1.0.13
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 103c:30b2 Audio device: Intel Corporation 82801G
Modem interrupt assignment and sharing:
23: 881 0 IO-APIC-fasteoi HDA Intel
--- Bootup diagnositcs for card in PCI slot 00:1b.0 ----
[ 15.908000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
[ 15.908000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
8086:27d8 is a High Definition Audio card, possibly hosting a soft modem.
A modem was not detected among the PCI devices:
------------------------------------------------
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
08:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 02)
08:09.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832
08:09.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
08:09.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
08:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
08:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
------------------------------------------------
with USB and bridge devices not displayed.
Please provide any independent information available on your modem.
If your modem is mounted on an ISA card, scanModem could not access it.
If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
Start > Settings > Control Panel > Classical View (for Window XP) > System
> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information.
Next do the Query Modem and record the ATI specifications displayed such as:
ATI3 - Agere SoftModem Version 2.1.22
ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.
Checking for audio+modem support in /proc/asound/pcm
00-01: Conexant Digital : Conexant Digital : playback 1
00-00: CONEXANT Analog : CONEXANT Analog : playback 1 : capture 1
For candidate modem in PCI bus: 00:1b.0
Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
Primary PCI_id 8086:27d8
Subsystem PCI_id 103c:30b2
Softmodem codec or Vendor from diagnostics:
from Archives:
Lacking a dsp (digital signal processing) chip, the modem is a software
intensive or "softmodem" type. Its primary controller manages the traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive alternatives:
1) An ALSA modem driver plus slmodemd. Read Smartlink.txt for details, and
to test get the package SLMODEMD-1.0.13.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
2) The hsfmodem software for Conexant chipset modems: Read Conexant.txt
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD-1.0.13.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD-1.0.13.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
Already loaded into the kernel is snd-intel8x0m and audio drivers it depends on,
displayed by: lsmod | grep snd_intel8x0m
Module Size Used by
-------------------------------------
snd_intel8x0m 18700 0
snd_ac97_codec 98336 1 snd_intel8x0m
snd_pcm 79876 5 snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd 54020 14 snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc 10888 3 snd_intel8x0m,snd_hda_intel,snd_pcm
The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
/proc/asound/pcm
-------------------------------
00-01: Conexant Digital : Conexant Digital : playback 1
00-00: CONEXANT Analog : CONEXANT Analog : playback 1 : capture 1
/proc/asound/modules
-------------------------------
0 snd_hda_intel
and from the command:
aplay -l | grep -i modem
----------------end Softmodem section --------------
scanModem could not identify the Support Type needed from diagnosics or archives.
If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
Start > Settings > Control Panel > Classical View (for Window XP) > System
> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information.
Next do the Query Modem and record the ATI specifications displayed such as:
ATI3 - Agere SoftModem Version 2.1.22
ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.
Writing Intel.txt
Formal support for Conexant chipset modems are available ONLY through
http://www.linuxant.com/drivers. Read Conexant.txt for details.
and Modem/YourSystem.txt for follow through guidance. Driver speed is limited to
14,400 until a key is purchased. There is NO freeware alternative.
There are two support package types: hsfmodem and hcflinmodem.
http://www.lorenzobettini.it/linux/LinuxSonyVaioVGN-S5VP_B reports a
problem and solution in stalling a key, after testing of the free low
speed download.
Read Conexant.txt
Writing Conexant.txt
The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility. Read the
Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Kernel-header resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
linux-headers-2.6.20-15-generic
Checking pppd properties:
-rwsr-xr-- 1 root dip 269224 2007-04-05 10:41 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
