------------------------------------------------------
Passa a Infostrada. ADSL e Telefono senza limiti e senza canone Telecom
http://click.libero.it/infostrada
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Ubuntu 7.04 kernel 2.6.20-15-generic
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686, Ubuntu 7.04
Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007
scanModem update of: 2007_May_11
ALSAversion 1.0.13
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24c6 1025:0064 Modem: Intel Corporation 82801DB/DBL/DBM
Modem interrupt assignment and sharing:
10: 17111 XT-PIC-XT ehci_hcd:usb4, ohci1394, yenta, tifm_7xx1, ipw2200, Intel 82801DB-ICH4
--- Bootup diagnositcs for card in PCI slot 00:1f.6 ----
[ 9.780357] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 9.780367] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
A modem device/card may be disabled at bootup, due to a variety of causes.
Look at the bootup diagnostics record dmesg.txt written out through:
$ dmesg > dmesg.txt
and try to garner some understanding from it. Possibilities therein are too
diverse to be automagically processed by scanModem. A line including the PCI
bus slot 00:1f.6 of your modem, and "disable" or "disabling" predicts problems,
though sometimes corrected later in the bootup. Similarly a line with "@"
in the interrupt (IRQ) for your 00:1f.6 slot is predictive of problems.
Possible corrections are:
0) Get unloading.gz from http://phep2.technion.ac.il/linmodems/packages/
This script unloads excess drivers which may be competing for resources.
Before trying to set up the modem, do:
$ gunzip unloading.gz
$ chmod +x unloading
$ su - root
# ./unloading
Or for Ubuntu related Distros
$ sudo ./unloading
1) Within the boot up BIOS, change from a Windows to a non-PNP/Other Operating System type.
Instructions for accessing BIOS are at:
http://linmodems.technion.ac.il/resources.html within: Additional Resourcces.
2a) Add an option "pci=routeirq" to the kernel boot up line.
Here is an example paragraph from /boot/grub/menu.lst :
title Ubuntu, kernel 2.6.15-26-686
root (hd0,6)
kernel /boot/vmlinuz-2.6.15-26-686 root=/dev/hda7 ro pci=routeirq
initrd /boot/initrd.img-2.6.15-26-686
savedefault
2b) Same as above, but use "pollirq" instead of "pci=routeirq".
3) Within some BIOS setups, IRQ assignments can be changed.
4) On non-laptop systems, moving the modem card to another slot has helped.
5) Sometimes upgrading the kernel solves the problem.
6) Sometimes downgrading the kernel solves the problem.
7) Sometimes changing the Linux distribution solves the problem.
CPU0
0: 100802 XT-PIC-XT timer
1: 166 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
6: 32060 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, eth0, radeon@pci:0000:01:00.0
8: 3 XT-PIC-XT rtc
9: 122777 XT-PIC-XT acpi
10: 17111 XT-PIC-XT ehci_hcd:usb4, ohci1394, yenta, tifm_7xx1, ipw2200, Intel 82801DB-ICH4
12: 133 XT-PIC-XT i8042
14: 7951 XT-PIC-XT libata
15: 2544 XT-PIC-XT libata
NMI: 0
LOC: 0
ERR: 0
MIS: 0
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fde0000 end: 000000001fee0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fee0000 size: 000000000000c000 end: 000000001feec000 type: 3
[ 0.000000] copy_e820_map() start: 000000001feec000 size: 0000000000014000 end: 000000001ff00000 type: 4
[ 0.000000] copy_e820_map() start: 000000001ff00000 size: 0000000000100000 end: 0000000020000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec10000 size: 0000000000010000 end: 00000000fec20000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000400000 end: 00000000ffc00000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fffffc00 size: 0000000000000400 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fee0000 (usable)
[ 0.000000] BIOS-e820: 000000001fee0000 - 000000001feec000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001feec000 - 000000001ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 510MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 130784) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130784
[ 0.000000] HighMem 130784 -> 130784
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130784
[ 0.000000] On node 0 totalpages: 130784
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 989 pages used for memmap
[ 0.000000] Normal zone: 125699 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 ACER ) @ 0x000f62c0
[ 0.000000] ACPI: RSDT (v001 ACER Kestrel 0x20021012 LTP 0x00000000) @ 0x1fee6205
[ 0.000000] ACPI: FADT (v001 ACER Kestrel 0x20021012 PTL 0x00000050) @ 0x1feebf2c
[ 0.000000] ACPI: HPET (v001 ACER Kestrel 0x20021012 PTL 0x00000000) @ 0x1feebfa0
[ 0.000000] ACPI: BOOT (v001 ACER Kestrel 0x20021012 LTP 0x00000001) @ 0x1feebfd8
[ 0.000000] ACPI: DSDT (v001 ACER Kestrel 0x20021012 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0x0
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec10000)
[ 0.000000] Detected 1598.704 MHz processor.
[ 8.096151] Built 1 zonelists. Total pages: 129763
[ 8.096156] Kernel command line: root=UUID=c95d8c91-6497-4ddf-9b73-eb7534c83dab ro quiet splash
[ 8.096328] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 8.096335] mapped APIC to ffffd000 (0140b000)
[ 8.096339] Enabling fast FPU save and restore... done.
[ 8.096342] Enabling unmasked SIMD FPU exception support... done.
[ 8.096352] Initializing CPU#0
[ 8.096420] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 8.097443] Console: colour VGA+ 80x25
[ 8.097647] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 8.097881] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 8.111283] Memory: 507328k/523136k available (1992k kernel code, 15208k reserved, 893k data, 328k init, 0k highmem)
[ 8.111293] virtual kernel memory layout:
[ 8.111294] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 8.111296] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 8.111297] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 8.111299] lowmem : 0xc0000000 - 0xdfee0000 ( 510 MB)
[ 8.111300] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 8.111301] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 8.111303] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 8.111306] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 8.188352] Calibrating delay using timer specific routine.. 3199.41 BogoMIPS (lpj=6398835)
[ 8.188393] Security Framework v1.0.0 initialized
[ 8.188400] SELinux: Disabled at boot.
[ 8.188417] Mount-cache hash table entries: 512
[ 8.188552] CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
[ 8.188564] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 8.188567] CPU: L2 cache: 2048K
[ 8.188570] CPU: After all inits, caps: afe9f9bf 00000000 00000000 00002040 00000180 00000000 00000000
[ 8.188579] Compat vDSO mapped to ffffe000.
[ 8.188583] Remapping vsyscall page to ffffe000
[ 8.188594] Checking 'hlt' instruction... OK.
[ 8.204436] SMP alternatives: switching to UP code
[ 8.204630] Freeing SMP alternatives: 11k freed
[ 8.204809] Early unpacking initramfs... done
[ 8.562814] ACPI: Core revision 20060707
[ 8.563487] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 8.565601] ACPI: setting ELCR to 0200 (from 0440)
[ 8.579068] CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
[ 8.579074] SMP motherboard not detected.
[ 8.579076] Local APIC not detected. Using dummy APIC emulation.
[ 8.579111] Brought up 1 CPUs
[ 8.579347] Booting paravirtualized kernel on bare hardware
[ 8.579414] Time: 13:32:43 Date: 04/27/107
[ 8.579441] NET: Registered protocol family 16
[ 8.579521] EISA bus registered
[ 8.579525] ACPI: bus type pci registered
[ 8.580616] PCI: PCI BIOS revision 2.10 entry at 0xfd782, last bus=2
[ 8.580619] PCI: Using configuration type 1
[ 8.580621] Setting up standard PCI resources
[ 8.598506] ACPI: Interpreter enabled
[ 8.598508] ACPI: Using PIC for interrupt routing
[ 8.598730] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 8.598735] PCI: Probing PCI hardware (bus 00)
[ 8.599883] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 8.599887] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[ 8.600119] Boot video device is 0000:01:00.0
[ 8.600389] PCI: Transparent bridge - 0000:00:1e.0
[ 8.600438] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[ 8.600441] Please report the result to linux-kernel to fix this permanently
[ 8.600458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 8.602766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 8.603058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 8.603977] ACPI: PCI Interrupt Link [LNKA] (IRQs *6)
[ 8.604220] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 8.604452] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 8.604688] ACPI: PCI Interrupt Link [LNKD] (IRQs *6)
[ 8.604921] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[ 8.605152] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
[ 8.605383] ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *0, disabled.
[ 8.605616] ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
[ 8.626608] ACPI: Power Resource [PFN0] (off)
[ 8.626717] ACPI: Power Resource [PFN1] (off)
[ 8.627363] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 8.627375] pnp: PnP ACPI init
[ 8.633508] pnp: PnP ACPI: found 9 devices
[ 8.633512] PnPBIOS: Disabled by ACPI PNP
[ 8.633557] PCI: Using ACPI for IRQ routing
[ 8.633559] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 8.639393] NET: Registered protocol family 8
[ 8.639395] NET: Registered protocol family 20
[ 8.639505] pnp: 00:04: ioport range 0x164e-0x164f has been reserved
[ 8.639764] PCI: Bridge: 0000:00:01.0
[ 8.639766] IO window: 3000-3fff
[ 8.639770] MEM window: d0100000-d01fffff
[ 8.639774] PREFETCH window: d8000000-dfffffff
[ 8.639780] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[ 8.639783] IO window: 00004000-000040ff
[ 8.639786] IO window: 00004400-000044ff
[ 8.639790] PREFETCH window: 30000000-33ffffff
[ 8.639795] MEM window: 38000000-3bffffff
[ 8.639798] PCI: Bridge: 0000:00:1e.0
[ 8.639801] IO window: 4000-4fff
[ 8.639806] MEM window: d0200000-d05fffff
[ 8.639810] PREFETCH window: 30000000-35ffffff
[ 8.639823] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 8.639834] PCI: Enabling device 0000:02:06.0 (0104 -> 0107)
[ 8.640033] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[ 8.640036] PCI: setting IRQ 10 as level-triggered
[ 8.640040] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
[ 8.640062] NET: Registered protocol family 2
[ 8.680011] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 8.680081] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 8.680185] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 8.680238] TCP: Hash tables configured (established 16384 bind 8192)
[ 8.680241] TCP reno registered
[ 8.692059] checking if image is initramfs... it is
[ 9.400990] Freeing initrd memory: 7013k freed
[ 9.401975] Simple Boot Flag at 0x37 set to 0x1
[ 9.402157] audit: initializing netlink socket (disabled)
[ 9.402172] audit(1180272763.480:1): initialized
[ 9.402299] VFS: Disk quotas dquot_6.5.1
[ 9.402319] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 9.402370] io scheduler noop registered
[ 9.402373] io scheduler anticipatory registered
[ 9.402376] io scheduler deadline registered
[ 9.402385] io scheduler cfq registered (default)
[ 9.402687] isapnp: Scanning for PnP cards...
[ 9.756029] isapnp: No Plug & Play device found
[ 9.779336] Real Time Clock Driver v1.12ac
[ 9.779397] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 9.779503] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 9.780353] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 9.780357] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 9.780367] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 9.780444] mice: PS/2 mouse device common for all mice
[ 9.780997] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 9.781203] input: Macintosh mouse button emulation as /class/input/input0
[ 9.781236] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 9.781241] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 9.781467] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
[ 9.784216] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 9.786695] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.786699] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 9.786702] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 9.786704] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 9.786707] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 9.786823] EISA: Probing bus 0 at eisa.0
[ 9.786831] Cannot allocate resource for EISA slot 1
[ 9.786834] Cannot allocate resource for EISA slot 2
[ 9.786836] Cannot allocate resource for EISA slot 3
[ 9.786838] Cannot allocate resource for EISA slot 4
[ 9.786855] EISA: Detected 0 cards.
[ 9.816932] TCP cubic registered
[ 9.816940] NET: Registered protocol family 1
[ 9.816962] Using IPI No-Shortcut mode
[ 9.817017] ACPI: (supports S0 S3 S4 S5)
[ 9.817058] Magic number: 7:877:534
[ 9.817367] Freeing unused kernel memory: 328k freed
[ 9.819062] Time: tsc clocksource has been installed.
[ 9.833672] input: AT Translated Set 2 keyboard as /class/input/input1
[ 11.023370] Capability LSM initialized
[ 11.050693] ACPI: Transitioning device [FAN0] to D3
[ 11.050696] ACPI: Transitioning device [FAN0] to D3
[ 11.050699] ACPI: Fan [FAN0] (off)
[ 11.050804] ACPI: Transitioning device [FAN1] to D3
[ 11.050806] ACPI: Transitioning device [FAN1] to D3
[ 11.050809] ACPI: Fan [FAN1] (off)
[ 11.053999] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 11.054004] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 11.058775] ACPI: Thermal Zone [THRM] (54 C)
[ 11.383310] usbcore: registered new interface driver usbfs
[ 11.383334] usbcore: registered new interface driver hub
[ 11.383358] usbcore: registered new device driver usb
[ 11.384184] USB Universal Host Controller Interface driver v3.0
[ 11.384475] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6
[ 11.384479] PCI: setting IRQ 6 as level-triggered
[ 11.384483] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
[ 11.384494] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 11.384498] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 11.384664] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 11.384687] uhci_hcd 0000:00:1d.0: irq 6, io base 0x00001800
[ 11.384786] usb usb1: configuration #1 chosen from 1 choice
[ 11.384808] hub 1-0:1.0: USB hub found
[ 11.384813] hub 1-0:1.0: 2 ports detected
[ 11.485861] hub 1-0:1.0: over-current change on port 1
[ 11.486135] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
[ 11.486139] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
[ 11.486151] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 11.486155] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 11.486182] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 11.486204] uhci_hcd 0000:00:1d.1: irq 6, io base 0x00001820
[ 11.486293] usb usb2: configuration #1 chosen from 1 choice
[ 11.486317] hub 2-0:1.0: USB hub found
[ 11.486324] hub 2-0:1.0: 2 ports detected
[ 11.500290] ieee1394: Initialized config rom entry `ip1394'
[ 11.589709] hub 1-0:1.0: over-current change on port 2
[ 11.590072] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6
[ 11.590076] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
[ 11.590088] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 11.590092] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 11.590121] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 11.590144] uhci_hcd 0000:00:1d.2: irq 6, io base 0x00001840
[ 11.590230] usb usb3: configuration #1 chosen from 1 choice
[ 11.590256] hub 3-0:1.0: USB hub found
[ 11.590261] hub 3-0:1.0: 2 ports detected
[ 3.568000] Time: acpi_pm clocksource has been installed.
[ 3.592000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
[ 3.592000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
[ 3.592000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.592000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.592000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 3.592000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.592000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.592000] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000
[ 3.596000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.596000] usb usb4: configuration #1 chosen from 1 choice
[ 3.596000] hub 4-0:1.0: USB hub found
[ 3.596000] hub 4-0:1.0: 6 ports detected
[ 3.704000] SCSI subsystem initialized
[ 3.708000] libata version 2.20 loaded.
[ 3.712000] b44.c:v1.01 (Jun 16, 2006)
[ 3.712000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
[ 3.716000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:c0:9f:58:91:17
[ 3.716000] ACPI: PCI Interrupt 0000:02:06.2[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
[ 3.764000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d020a000-d020a7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.768000] ata_piix 0000:00:1f.1: version 2.10ac1
[ 3.768000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 3.768000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
[ 3.768000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 3.768000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14
[ 3.768000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15
[ 3.768000] scsi0 : ata_piix
[ 3.924000] hub 4-0:1.0: over-current change on port 1
[ 3.932000] ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240
[ 3.932000] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD4A, max UDMA/100
[ 3.932000] ata1.00: 117210240 sectors, multi 16: LBA48
[ 3.940000] ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240
[ 3.940000] ata1.00: configured for UDMA/100
[ 3.940000] scsi1 : ata_piix
[ 4.028000] hub 4-0:1.0: over-current change on port 2
[ 4.260000] ata2.00: ATAPI, max UDMA/33
[ 4.424000] ata2.00: configured for UDMA/33
[ 4.424000] scsi 0:0:0:0: Direct-Access ATA IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5
[ 4.424000] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K14RA 1.00 PQ: 0 ANSI: 5
[ 4.436000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 4.436000] sda: Write Protect is off
[ 4.436000] sda: Mode Sense: 00 3a 00 00
[ 4.436000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.436000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 4.436000] sda: Write Protect is off
[ 4.436000] sda: Mode Sense: 00 3a 00 00
[ 4.436000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.436000] sda: sda1 sda2 sda3 sda4
[ 4.492000] sd 0:0:0:0: Attached scsi disk sda
[ 4.496000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.496000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.508000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.508000] Uniform CD-ROM driver Revision: 3.20
[ 4.508000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.556000] usb 4-6: new high speed USB device using ehci_hcd and address 3
[ 4.692000] usb 4-6: configuration #1 chosen from 1 choice
[ 4.748000] Attempting manual resume
[ 4.748000] swsusp: Resume From Partition 8:4
[ 4.748000] PM: Checking swsusp image.
[ 4.748000] PM: Resume from disk failed.
[ 4.800000] kjournald starting. Commit interval 5 seconds
[ 4.800000] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.932000] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 5.040000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f000025bc56]
[ 5.112000] usb 2-1: configuration #1 chosen from 1 choice
[ 5.116000] usbcore: registered new interface driver libusual
[ 5.452000] Initializing USB Mass Storage driver...
[ 5.452000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 5.452000] usbcore: registered new interface driver usb-storage
[ 5.452000] USB Mass Storage support registered.
[ 5.452000] usb-storage: device found at 3
[ 5.452000] usb-storage: waiting for device to settle before scanning
[ 10.452000] usb-storage: device scan complete
[ 10.452000] scsi 2:0:0:0: Direct-Access Kingston DataTravelerMini PMAP PQ: 0 ANSI: 0 CCS
[ 10.452000] SCSI device sdb: 2015232 512-byte hdwr sectors (1032 MB)
[ 10.452000] sdb: Write Protect is off
[ 10.452000] sdb: Mode Sense: 23 00 00 00
[ 10.452000] sdb: assuming drive cache: write through
[ 10.456000] SCSI device sdb: 2015232 512-byte hdwr sectors (1032 MB)
[ 10.456000] sdb: Write Protect is off
[ 10.456000] sdb: Mode Sense: 23 00 00 00
[ 10.456000] sdb: assuming drive cache: write through
[ 10.456000] sdb: sdb1
[ 10.456000] sd 2:0:0:0: Attached scsi removable disk sdb
[ 10.456000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 17.764000] NET: Registered protocol family 17
[ 17.800000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.804000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.936000] Linux agpgart interface v0.102 (c) Dave Jones
[ 17.940000] agpgart: Detected an Intel 855GM Chipset.
[ 17.960000] agpgart: AGP aperture is 256M @ 0xe0000000
[ 18.652000] iTCO_vendor_support: vendor-support=0
[ 18.664000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 18.664000] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[ 18.664000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 18.716000] intel_rng: FWH not detected
[ 18.752000] Yenta: CardBus bridge found at 0000:02:06.0 [1025:0064]
[ 18.752000] Yenta: Enabling burst memory read transactions
[ 18.752000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 18.752000] Yenta: Routing CardBus interrupts to PCI
[ 18.752000] Yenta TI: socket 0000:02:06.0, mfunc 0x01a21b22, devctl 0x64
[ 18.984000] Yenta: ISA IRQ mask 0x08b8, PCI irq 10
[ 18.984000] Socket status: 30000006
[ 18.984000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 18.984000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[ 18.984000] cs: IO port probe 0x4000-0x4fff: clean.
[ 18.984000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd05fffff
[ 18.984000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x35ffffff
[ 19.092000] usbcore: registered new interface driver hiddev
[ 19.116000] ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
[ 19.180000] ieee80211_crypt: registered algorithm 'NULL'
[ 19.184000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 19.184000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
[ 19.228000] input: Microsoft Microsoft USB Wireless Mouse as /class/input/input2
[ 19.228000] input: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on usb-0000:00:1d.1-1
[ 19.228000] usbcore: registered new interface driver usbhid
[ 19.228000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 19.244000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
[ 19.244000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 19.244000] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 19.244000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 19.276000] irda_init()
[ 19.276000] NET: Registered protocol family 23
[ 19.424000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
[ 19.476000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 19.480000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x3F8 ; irq 3 ; dma 1.
[ 19.480000] nsc-ircc, chip->init
[ 19.480000] nsc-ircc, Found chip at base=0x164e
[ 19.480000] nsc-ircc, driver loaded (Dag Brattli)
[ 19.480000] nsc_ircc_open(), can't get iobase of 0x3f8
[ 19.480000] nsc-ircc, Found chip at base=0x164e
[ 19.480000] nsc-ircc, driver loaded (Dag Brattli)
[ 19.480000] nsc_ircc_open(), can't get iobase of 0x3f8
[ 19.480000] pnp: Device 00:08 disabled.
[ 19.508000] cs: IO port probe 0x100-0x3af: clean.
[ 19.512000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 19.512000] cs: IO port probe 0x820-0x8ff: clean.
[ 19.512000] cs: IO port probe 0xc00-0xcf7: clean.
[ 19.512000] cs: IO port probe 0xa00-0xaff: clean.
[ 19.644000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 19.668000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 19.668000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 19.984000] intel8x0_measure_ac97_clock: measured 54134 usecs
[ 19.984000] intel8x0: clocking to 48000
[ 20.120000] fuse init (API version 7.8)
[ 20.204000] lp: driver loaded but no devices found
[ 20.244000] Adding 489972k swap on /dev/disk/by-uuid/d8159f4c-f138-49b0-9e90-e1054dcc4238. Priority:-1 extents:1 across:489972k
[ 20.428000] EXT3 FS on sda2, internal journal
[ 20.672000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 20.728000] NTFS volume version 3.1.
[ 25.056000] **WARNING** I2C adapter driver [] forgot to specify physical device; fix it!
[ 25.060000] ACPI: EC HC smbus [SMBC]
[ 25.948000] ACPI: Smart Battery System [SBS0]
[ 25.968000] Using specific hotkey driver
[ 26.004000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 26.084000] No dock devices found.
[ 26.252000] input: Power Button (FF) as /class/input/input4
[ 26.252000] ACPI: Power Button (FF) [PWRF]
[ 26.312000] input: Lid Switch as /class/input/input5
[ 26.316000] ACPI: Lid Switch [LID]
[ 26.396000] input: Sleep Button (CM) as /class/input/input6
[ 26.400000] ACPI: Sleep Button (CM) [SLPB]
[ 26.444000] ibm_acpi: ec object not found
[ 26.460000] pcc_acpi: loading...
[ 29.032000] ttyS0: LSR safety check engaged!
[ 30.768000] [drm] Initialized drm 1.1.0 20060810
[ 30.776000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
[ 30.780000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 31.892000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 31.892000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 31.892000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 31.912000] ppdev: user-space parallel port driver
[ 32.168000] [drm] Setting GART location based on new memory map
[ 32.168000] [drm] Loading R300 Microcode
[ 32.168000] [drm] writeback test succeeded in 1 usecs
[ 32.788000] apm: BIOS not found.
[ 33.004000] Bluetooth: Core ver 2.11
[ 33.004000] NET: Registered protocol family 31
[ 33.004000] Bluetooth: HCI device and connection manager initialized
[ 33.004000] Bluetooth: HCI socket layer initialized
[ 33.036000] Bluetooth: L2CAP ver 2.8
[ 33.036000] Bluetooth: L2CAP socket layer initialized
[ 33.084000] Bluetooth: RFCOMM socket layer initialized
[ 33.084000] Bluetooth: RFCOMM TTY layer initialized
[ 33.084000] Bluetooth: RFCOMM ver 1.8
[ 49.364000] NET: Registered protocol family 10
[ 49.364000] lo: Disabled Privacy Extensions
[ 49.364000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 59.396000] eth1: no IPv6 routers present
[ 186.324000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 186.460000] ISO 9660 Extensions: RRIP_1991A
