Jusuf, Sadly, LSI/AgereSystems has yet not provided Linux support for the Vendor Id: 0x11c11040 chipset They have informed that 0x11c11040 is NOT within the Si3054 family, but this designation has not yet been corrected in the ALSA code. Read InfoGeneral.txt about alternatives MarvS scanModem maintainer On 5/12/07, jusuf@xxxxxxxxxxxx <jusuf@xxxxxxxxxxxx> wrote:
Using ALSA 1.0.14.rc3, and slmodemd extracted from SLMODEMD.gcc4.tar.gz Check the modem : [root@localhost user]# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC883 Digital [ALC883 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] Subdevices: 0/1 Subdevice #0: subdevice #0 [root@localhost user]# cat /proc/asound/card0/codec#1 Codec: Generic 11c1 Si3054 Address: 1 Vendor Id: 0x11c11040 Subsystem Id: 0x11c10001 Revision Id: 0x100200 Run the modem with : [root@localhost user]# slmodemd -c INDONESIA --alsa hw:0,6 SmartLink Soft Modem: version 2.9.11 Mar 13 2006 18:27:33 symbolic link `/dev/ttySL0' -> `/dev/pts/4' created. modem `hw:0,6' created. TTY is `/dev/pts/4' Use `/dev/ttySL0' as modem device, Ctrl+C for termination. Using wvdial to check it : [root@localhost ~]# wvdialconf /etc/wvdial.conf Scanning your serial ports for a modem. Port Scan<*1>: S0 S1 S2 S3 WvModem<*1>: Cannot get information for serial port. ttySL0<*1>: ATQ0 V1 E1 -- OK ttySL0<*1>: ATQ0 V1 E1 Z -- OK ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem ttySL0<*1>: Speed 4800: AT -- OK ttySL0<*1>: Speed 9600: AT -- OK ttySL0<*1>: Speed 19200: AT -- OK ttySL0<*1>: Speed 38400: AT -- OK ttySL0<*1>: Speed 57600: AT -- OK ttySL0<*1>: Speed 115200: AT -- OK ttySL0<*1>: Speed 230400: AT -- OK ttySL0<*1>: Speed 460800: AT -- OK ttySL0<*1>: Max speed is 460800; that should be safe. ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found a modem on /dev/ttySL0. Modem configuration written to /etc/wvdial.conf. ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" But with KPPP will bring NO CARRIER error, and : SmartLink Soft Modem: version 2.9.11 Mar 13 2006 18:27:33 symbolic link `/dev/ttySL0' -> `/dev/pts/4' created. modem `hw:0,6' created. TTY is `/dev/pts/4' Use `/dev/ttySL0' as modem device, Ctrl+C for termination. error: period size 48 is not supported by playback (64). What I can do next to make the modem works ? If it is Agere modem and need patch, where I can get the patch ? Thank you Mr. Marv. Cheers, Jusuf
