problem with agere hda intel modem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

I'm trying to make this modem work on a notebook. On window$ its probed as Agere Modem. I have compiled alsa 1.0.14rc3 drivers, loaded the modules and the ModemData.txt generated from scanModem is attached.

The problem is:
when I try to connect using kppp I get: NO CARRIER.
I have already tried set kppp to not wait for signal, but I've got the same error.

sorry for my english,

can someone help? (I've tried the forums, google, a lot of things, but have no success with this)

thanks!

Pablo Marcondes
 Only plain text email is forwarded by the  DISCUSS@xxxxxxxxxxxxx List Server.
 Do use the following as the email Subject Line:
           SomeName, YourCountry 
Welcome to Metasys Desktop - Kernel  kernel 2.6.18.1-6-default 
 This will alert cogent experts, and  distinguish cases in the Archives.
 YourCountry will enable Country Code guidance.
 Occassionally responses are blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org .
 Local Linux experts can be found through: http://www.linux.org/groups/index.html
--------------------------  System information ----------------------------
CPU=i686,  
Welcome to Metasys Desktop - Kernel 
Linux version 2.6.18.1-6-default (geeko@buildhost) (gcc version 4.1.2 20061018 (prerelease) (SUSE Linux)) #1 SMP Wed Oct 18 15:16:29 UTC 2006
 scanModem update of:  2007_March_15

The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0

USB modem not detected by lsusb

Modem or host audio card candidates have firmware information:

 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:27d8	14c0:0021	Audio device: Intel Corporation 82801G 

 Modem interrupt assignment and sharing: 
 58:        855          0         PCI-MSI  HDA Intel

 --- Bootup diagnositcs for card in PCI slot 00:1b.0 ----
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1b.0 to 64

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

ALSAversion 1.0.14rc2
8086:27d8 is a High Definition Audio card, possibly hosting a soft modem.


There may be novel modem chipset information within the /proc/asound/ 
files. They have been copied and packed into a file: Modem/11c1.tgz
Please send 11c1.tgz to the scanModem maintainer:  Marvin.Stodolsky@xxxxxxxxx

HDAmodemChip=0x11c11040
 For candidate modem in PCI bus:  00:1b.0
   Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
      Primary PCI_id  8086:27d8
    Subsystem PCI_id  14c0:0021 
    Softmodem codec or Vendor from diagnostics: 11c1, an AgereSystems type.
                              from    Archives: 11c1, an AgereSystems type.
                        The HDA card softmodem chip is 0x11c11040

 Lacking a dsp (digital signal processing) chip, the modem is a software 
 intensive or "softmodem" type. Its primary controller manages the traffic 
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:	slmodemd

 An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-hda-intel
 provides Low Level support enabling contact with the modem hardware.
 For all BUT Conexant chip soft modems (using hsfmodem software)
 complementary High Level support is through a Smartlink utility:  slmodemd

 Download from http://linmodems.technion.ac.il/packages/smartlink/ 
 the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with:
 	$ tar zxf SLMODEMD.gcc4.1.tar.gz
 and read instructions therein. But briefly, the modem is setup with command:
 	 slmodemd -c YOUR_COUNTRY --alsa hw:0,6 
 reporting dynamic creation of ports:
	/dev/ttySL0 --> /dev/pts/N   , with N some number
 Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.

 Already loaded into the kernel is snd-hda-intel and audio drivers it depends on,
 displayed by:	lsmod | grep snd_hda_intel
Module                  Size  Used by
-------------------------------------
snd_hda_intel          25624  4 
snd_hda_codec         229376  1 snd_hda_intel
snd_pcm                88708  5 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_page_alloc         14600  2 snd_hda_intel,snd_pcm
snd                    67216  15 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer,snd_page_alloc


The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
	/proc/asound/pcm
-------------------------------
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-02: ALC883 Analog : ALC883 Analog : capture 2
00-01: ALC883 Digital : ALC883 Digital : playback 1
00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 2

	/proc/asound/modules
-------------------------------
 0 snd_hda_intel
	/proc/asound/card0/codec#1
-------------------------------
Codec: Generic 11c1 Si3054
Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x11c10001
Revision Id: 0x100200
-------------------------------
Current support status of HDA cards is:
  Vendor IDs  Chip maker     Support type 
  ----------  ----------    -------------
  0x14f12bfa  Conexant      hsfmodem , not slmodemd compatible
  0x11c13026  AgereSystems  snd-hda-intel, slmodemd supported
  0x11c11040  AgereSystems      "             "    , patch needed
  0x11c13055  AgereSystems      "             "    ,      "
  0x163c3055  Smartlink         "             "    ,      "
  0x163c3155    "               "             "    ,      "
  0x10573055  Motorola          "             "    ,      "
  0x10573155     "              "             "    ,      ""
as of October 2006.

and from the command:
	aplay -l | grep -i modem
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]

----------------end Softmodem section --------------

Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.2
             and the compiler used in kernel assembly: 4.1.0

 Kernel-header resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
	 kernel-source-2.6.18.1-6-default


Checking pppd properties:
	-rwxr-xr-x 1 root dialout 291796 2006-04-22 23:38 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	 chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html


 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  lrwxrwxrwx 1 root root 10 2007-04-02 13:58 /dev/ttySL0 -> /dev/pts/0
     Within /etc/udev/ files:
/etc/udev/rules.d/31-network.rules:SUBSYSTEM=="net", ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*", GOTO="skip_ifup"
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="modems/mwave*",	NAME="%k", GROUP="uucp"
/etc/udev/rules.d/50-udev-default.rules:# 219 /dev/modems/mwave MWave modem firmware upload
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave",		NAME="modems/%k"
     Within /etc/modprobe.conf files:
/etc/modprobe.conf:# Linux ACP modem (Mwave)
/etc/modprobe.conf.local:alias /dev/modem /dev/ttySHSF
/etc/modprobe.d/blacklist:# ALSA PCI sound/modem modules - should be configured via yast
/etc/modprobe.d/blacklist:blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist:blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:
alias /dev/modem /dev/ttySHSF
--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux