Thank you Marvin for your help. That's what I did. No pcmcia and usb hardware attached [root@(none) grub]# ifconfig eth0 down [root@(none) grub]# ifconfig eth1 down [root@(none) grub]# ifconfig eth2 down [root@(none) grub]# modprobe -r 8139too [root@(none) grub]# modprobe -r ipw2100 [root@(none) grub]# modprobe -r uhci_hcd [root@(none) grub]# modprobe -r ehci_hcd [root@(none) grub]# modprobe -r snd-intel8x0m [root@(none) grub]# modprobe snd-intel8x0m [root@(none) grub]# slmodemd -c URUGUAY --alsa modem:1 error: mixer setup: attach hw:1 error: No such device ALSA lib pcm.c:2014:(snd_pcm_open_conf) Invalid type for PCM modem:1 definition (id: modem, value: cards.pcm.modem) error: alsa setup: cannot open playback device 'modem:1': Invalid argument error: cannot setup device `modem:1' You know that when I turn off eth2 (wifi) I got a connection message but after a while it went on again, automagically. This is because I am able to send this email from this computer (wireless network) I am not rebboting Thanks, Daniel On Saturday 17 March 2007 16:41, you wrote: > Daniel, > > Your > Class 0703: 8086:24c6 Modem: Intel Corporation 82801DB/DBL/DBM > Primary PCI_id 8086:24c6 > Subsystem PCI_id 1025:003d > Softmodem codec or Vendor from diagnostics: > from Archives: SIL27, an AgereSystems type > is an AC'97 modem type, so that correct command is: > # slmodemd -c URUGUAY --alsa modem:1 > > However the current blockage is: > --- Bootup diagnositcs for card in PCI slot 00:1f.6 ---- > ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, > low) -> IRQ 10 > ACPI: PCI interrupt for device 0000:00:1f.6 disabled > > Your modem Intel 82801DB-ICH4 is sharing the interrupt (IRQ) 10 with > functions: uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ehci_hcd:usb4, > ohci1394, yenta (PCMCIA driver) , eth0, eth2, i915@pci:0000:00:02.0 > > Your Routine Test (RT) to try during correction trials is unloading & > reloading the modem driver: > # modprobe -r snd-intel8x0m > # modprobe snd-intel8x0m > then the > # slmodemd -c URUGUAY --alsa modem:1 > wherefrom a success report would include port creation: > /dev/ttySL0 ---> /dev/pts/N > with N some number > > Things to try: > 1) Detach/remove all possible USB devices and PCMCIA cards and reboot > into Linux > Shutdown ethernet: > # ifconfig eth0 down > # ifconfig eth1 down > # ifconfig eth2 down > Remove their drivers: > # modprobe -r 8139too > # modprobe -r ipw2100 > the wireless driver > If you don't have a USB mouse: > # modprobe -r uhci_hcd > # modprobe -r ehci_hcd > > With resources thus freed up, try the RT. > > Report back at this point, before proceeding to the bootup options > described in Bootup.txt > > Marv S > > On 3/17/07, Daniel Stonek <daniel@xxxxxxxxxx> wrote: > > Hello Marvin, > > This is what I get, I don't know how to fix it. > > I am attaching some txt files from ./scanModem results. > > Thanks for your help. > > > > > > # slmodemd -c URUGUAY --alsa modem:1 > > error: mixer setup: attach hw:1 error: No such device > > ALSA lib pcm.c:2014:(snd_pcm_open_conf) Invalid type for PCM modem:1 > > definition (id: modem, value: cards.pcm.modem) > > error: alsa setup: cannot open playback device 'modem:1': Invalid > > argument error: cannot setup device `modem:1' > > > > # slmodemd -c URUGUAY --alsa hw:0,6 > > error: mixer setup: Off-hook switch not found for card hw:0 > > error: alsa setup: cannot open playback device 'hw:0,6': No such file or > > directory > > error: cannot setup device `hw:0,6' > > > > On Friday 16 March 2007 21:25, you wrote: > > > Re: slmodemd -c URUGUAY --alsa hw:0,6 > > > > > > The slmodemd supported modems are in two categories. > > > The newer and increasingly prevalant are HDA (High Definition Audio) > > > controller which can host softmodem subsystems. These use the command > > > format: slmodemd -c URUGUAY --alsa hw:0,N > > > when N is usually 1 or 6 > > > If there are no System problems > > > ./scanModem > > > will be able to report whixh N to use. > > > > > > The older type are the older AC'97 type SoftModem Controller cards. > > > For all of these but the Conexant chip subtype requiring hsfmodem > > > software > > > , the command is like: > > > slmodemd -c URUGUAY --alsa modem:1 > > > > > > To deal with System problems blocking a full scanModem diagnostic > > > I long ago set a default output: > > > slmodemd -c COUNTRY --alsa modem:1 > > > because it was usually correct. > > > > > > But with the increasing prevalance of HDA hosted modems, > > > I'll have to chamge that default. In the meantme > > > MUCH THANKS > > > for all you who are helping out, and just remember that if it is a HDA > > > based modem > > > the needed command syntax is like > > > slmodemd -c URUGUAY --alsa hw:0,N > > > > > > If some coming guidance, I'll illustrate how to recognize this amon > > > the scanModem outputs. > > > > > > MarvS > > > > > > On 3/16/07, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: > > > > Ok, > > > > > > > > maybe this is one of those cases in which you need > > > > to update alsa to a newer version and recompile. Or > > > > instead of --alsa modem:1, try something like > > > > # slmodemd -c URUGUAY --alsa hw 0:6, I am not sure > > > > > > > > or could be that the modem card is disabled in the > > > > bootup process as the lines show, > > > > > > > > The PCI slot 00:1f.6 of the modem card may be > > > > disabled early in a bootup process, but then enabled > > > > later. If modem drivers load, but the modem is not > > > > responsive, read Bootup.txt about possible fixes. > > > > Send dmesg.txt along with ModemData.txt to > > > > discuss@xxxxxxxxxxxxx if help is needed. > > > > > > > > When you do > > > > # slmodemd -c URUGUAY --alsa modem:1 > > > > open up another terminal and run dmesg and send to > > > > discuss@xxxxxxxxxxxxx for further help. > > > > > > > > Regards, > > > > > > > > Antonio > > > > > > > > --- Daniel Stonek <daniel@xxxxxxxxxx> wrote: > > > > > Hi Antonio, > > > > > I have installed slmodemd (and removed hsfmodem) > > > > > but > > > > > # slmodemd -c URUGUAY --alsa modem:1 > > > > > error: mixer setup: attach hw:1 error: No such > > > > > device > > > > > ALSA lib pcm.c:2014:(snd_pcm_open_conf) Invalid type > > > > > for PCM modem:1 > > > > > definition (id: modem, value: cards.pcm.modem) > > > > > error: alsa setup: cannot open playback device > > > > > 'modem:1': Invalid argument > > > > > error: cannot setup device `modem:1' > > > > > > > > > > Thank you, > > > > > Daniel > > > > > > > > > > On Friday 16 March 2007 11:16, you wrote: > > > > > > Daniel, > > > > > > > > > > > > The following tells you what you need to do. > > > > > > > > > > > > Support type needed or chipset: slmodemd > > > > > > > > > > > > An ALSA (Advanced Linux Sound Architecture) modem > > > > > > driver: > > > > > > snd-intel8x0m > > > > > > provides Low Level support enabling contact with > > > > > > > > > > the > > > > > > > > > > > modem hardware. > > > > > > For all BUT Conexant chip soft modems (using > > > > > > > > > > hsfmodem > > > > > > > > > > > software) > > > > > > complementary High Level support is through a > > > > > > Smartlink utility: > > > > > > slmodemd > > > > > > > > > > > > Download from > > > > > > > > > > http://linmodems.technion.ac.il/packages/smartlink/ > > > > > > > > > > > the package SLMODEMD.gcc4.1.tar.gz having a > > > > > > > > > > compiled > > > > > > > > > > > slmodemd. Unpack > > > > > > under Linux with: > > > > > > $ tar zxf SLMODEMD.gcc4.1.tar.gz > > > > > > and read instructions therein. But briefly, the > > > > > > > > > > modem > > > > > > > > > > > is setup with > > > > > > command: > > > > > > slmodemd -c YOUR_COUNTRY --alsa modem:1 > > > > > > reporting dynamic creation of ports: > > > > > > /dev/ttySL0 --> /dev/pts/N , with N some > > > > > > number > > > > > > Read Smartlink.txt and Modem/YourSystem.txt for > > > > > > follow through > > > > > > guidance. > > > > > > > > > > > > Regards, > > > > > > > > > > > > Antonio > > > > > > > > > > > > --- Daniel Stonek <daniel@xxxxxxxxxx> wrote: > > > > > > > Please tell me how to install a working driver. > > > > > > > Thank you. Daniel > > > > > > > > > > > > > > > Only plain text email is forwarded by the > > > > > > > > > > > > > > DISCUSS@xxxxxxxxxxxxx List Server. > > > > > > > Do use the following as the email Subject Line: > > > > > > > SomeName, YourCountry Mandriva Linux > > > > > > > release 2007.0 (Official) for i586 > > > > > > > Kernel 2.6.17-5mdv on an i686 / kernel > > > > > > > > > > 2.6.17-5mdv > > > > > > > > > > > > This will alert cogent experts, and > > > > > > > > > > distinguish > > > > > > > > > > > > cases in the Archives. > > > > > > > YourCountry will enable Country Code guidance. > > > > > > > Occassionally responses are blocked by an > > > > > > > > > > Internet > > > > > > > > > > > > Provider mail filters. > > > > > > > So in a day, also check the Archived responses > > > > > > > > > > at > > > > > > > > > > > > http://www.linmodems.org . > > > > > > > Local Linux experts can be found through: > > > > > > > http://www.linux.org/groups/index.html > > > > > > > -------------------------- System information > > > > > > > ---------------------------- > > > > > > > CPU=i686, Mandriva Linux release 2007.0 > > > > > > > > > > (Official) > > > > > > > > > > > > for i586 > > > > > > > Kernel 2.6.17-5mdv on an i686 / > > > > > > > Linux version 2.6.17-5mdv > > > > > > > > > > (rtp@xxxxxxxxxxxxxxxxxxxx) > > > > > > > > > > > > (gcc version 4.1.1 20060724 (prerelease) > > > > > > > (4.1.1-3mdk)) #1 SMP Wed Sep 13 14:32:31 EDT > > > > > > > > > > 2006 > > > > > > > > > > > > scanModem update of: 2007_March_05 > > > > > > > The modem symbolic link is /dev/modem -> > > > > > > > > > > ttySHSF0 > > > > > > > > > > > > USB modem not detected by lsusb > > > > > > > > > > > > > > Modem or host audio card candidates have > > > > > > > > > > firmware > > > > > > > > > > > > information: > > > > > > > > > > > > > > PCI slot PCI ID SubsystemID Name > > > > > > > ---------- --------- --------- > > > > > > > -------------- 00:1f.6 8086:24c6 1025:003d Modem: > > > > > > > Intel Corporation 82801DB/DBL/DBM > > > > > > > > > > > > > > Modem interrupt assignment and sharing: > > > > > > > 10: 33802 XT-PIC uhci_hcd:usb1, > > > > > > > uhci_hcd:usb2, uhci_hcd:usb3, ehci_hcd:usb4, > > > > > > > ohci1394, yenta, Intel 82801DB-ICH4, eth0, eth2, > > > > > > > i915@pci:0000:00:02.0 > > > > > > > > > > > > > > --- Bootup diagnositcs for card in PCI slot > > > > > > > > > > 00:1f.6 > > > > > > > > > > > > ---- > > > > > > > ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link > > > > > > > > > > [LNKB] > > > > > > > > > > > > -> GSI 10 (level, low) -> IRQ 10 > > > > > > > ACPI: PCI interrupt for device 0000:00:1f.6 > > > > > > > > > > disabled > > > > > > > > > > > > ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link > > > > > > > > > > [LNKB] > > > > > > > > > > > > -> GSI 10 (level, low) -> IRQ 10 > > > > > > > PCI: Setting latency timer of device > > > > > > > > > > 0000:00:1f.6 to > > > > > > > > > > > > 64 > > > > > > > ACPI: PCI interrupt for device 0000:00:1f.6 > > > > > > > > > > disabled > > > > > > > > > > > > hsfich: probe of 0000:00:1f.6 failed with error > > > > > > > > > > -5 > > > > > > > > > > > > The PCI slot 00:1f.6 of the modem card may be > > > > > > > disabled early in > > > > > > > a bootup process, but then enabled later. If > > > > > > > > > > modem > > > > > > > > > > > > drivers load > > > > > > > but the modem is not responsive, read > > > > > > > > > > Bootup.txt > > > > > > > > > > > > about possible fixes. > > > > > > > Send dmesg.txt along with ModemData.txt to > > > > > > > discuss@xxxxxxxxxxxxx > > > > > > > if help is needed. > > > > > > > > > > > > > > > > > > > > > === Finished modem firmware and bootup > > > > > > > > > > diagnostics > > > > > > > > > > > > section. === > > > > > > > === Next deducing cogent software === > > > > > > > > > > > > > > ALSAversion 1.0.12 > > > > > > > The audio card is not a modem hosting type. > > > > > > > Bootup diagnostic HSF: ERROR: SILICON > > > > > > > > > > Laboratories > > > > > > > > > > > > or LUCENT AC97 modem detected!<3> > > > > > > > HSF: ERROR: This driver only supports CONEXANT > > > > > > > devices<3> > > > > > > > HSF: ERROR: not a Conexant modem<3> > > > > > > > For candidate modem in PCI bus: 00:1f.6 > > > > > > > Class 0703: 8086:24c6 Modem: Intel > > > > > > > > > > Corporation > > > > > > > > > > > > 82801DB/DBL/DBM > > > > > > > Primary PCI_id 8086:24c6 > > > > > > > Subsystem PCI_id 1025:003d > > > > > > > Softmodem codec or Vendor from diagnostics: > > > > > > > from Archives: > > > > > > > SIL27, an AgereSystems type. > > > > > > > > > > > > > > > > > > > > > Lacking a dsp (digital signal processing) chip, > > > > > > > > > > the > > > > > > > > > > > > modem is a software > > > > > > > intensive or "softmodem" type. Its primary > > > > > > > controller manages the traffic > > > > > > > with the CPU. But the software needed is > > > > > > > > > > specified > > > > > > > > > > > > in the Subsystem. > > > > > > > ----------------------------------------- > > > > > > > Support type needed or chipset: slmodemd > > > > > > > > > > > > > > An ALSA (Advanced Linux Sound Architecture) > > > > > > > > > > modem > > > > > > > > > > > > driver: snd-intel8x0m > > > > > > > provides Low Level support enabling contact > > > > > > > > > > with > > > > > > > > > > > > the modem hardware. > > > > > > > For all BUT Conexant chip soft modems (using > > > > > > > hsfmodem software) > > > > > > > complementary High Level support is through a > > > > > > > Smartlink utility: slmodemd > > > > > > > > > > > > > > Download from > > > > > > > > > > http://linmodems.technion.ac.il/packages/smartlink/ > > > > > > > > > > > > the package SLMODEMD.gcc4.1.tar.gz having a > > > > > > > compiled slmodemd. Unpack under Linux with: > > > > > > > $ tar zxf SLMODEMD.gcc4.1.tar.gz > > > > > > > and read instructions therein. But briefly, the > > > > > > > > === message truncated === > > > > > > > > > > > > > > > > > > > > _____________________________________________________________________ > > > >____ ___________ Be a PS3 game guru. > > > > Get your game face on with the latest PS3 news and previews at Yahoo! > > > > Games. http://videogames.yahoo.com/platform?platform=120121
