Troy Lee wrote:
I'm still very new to ubuntu.
So, I guess that you want to read what to do next.
See attached, plus HSF driver for HDA device.
Jacques
------------------------------------------------------------------------
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Ubuntu 6.06.1 LTS kernel 2.6.15-26-386
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686, Ubuntu 6.06.1 LTS
Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
scanModem update of: 2007_March_05
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
0000:00:1b.0 8086:27d8 1028:01c2 0403: Intel Corporation 82801G
Modem interrupt assignment and sharing:
225: 898 IO-APIC-level uhci_hcd:usb2, HDA Intel
--- Bootup diagnositcs for card in PCI slot 0000:00:1b.0 ----
[17179589.480000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 225
[17179589.480000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
ALSAversion 1.0.10
/proc/asound/Intel/codec#1:Vendor Id: 0x14f12bfa
/proc/asound/card0/codec#1:Vendor Id: 0x14f12bfa
------
14f1 is the Conexant Vendor ID, and 0x14f12bfa a softmodem chipset.
Get a hsfmodem package through http://www.linuxant.com
8086:27d8 is a High Definition Audio card, possibly hosting a soft modem.
snd-hda-intel may not be competent to read /proc/asound/card0/codec#1
before 2.6.15 kernels, for HDA card 8086:27d8
For candidate modem in PCI bus: 0000:00:1b.0
Class 0403: 8086:27d8 0403: Intel Corporation 82801G
Primary PCI_id 8086:27d8
Subsystem PCI_id 1028:01c2
Softmodem codec or Vendor from diagnostics: 14f1, a Conexant type,
from Archives:
This is a NEW softmodem case! Please send the output ModemData.txt
to DISCUSS@xxxxxxxxxxxxx , even if further assistance is not needed.
It will enrich the Archive and help others!
-------------------------------------------
Lacking a dsp (digital signal processing) chip, the modem is a software
intensive or "softmodem" type. Its primary controller manages the traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset: hsfmodem
The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
/proc/asound/pcm
-------------------------------
00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 2
00-01: STAC92xx Digital : STAC92xx Digital : playback 1
/proc/asound/modules
-------------------------------
0 snd_hda_intel
/proc/asound/card0/codec#1
-------------------------------
Codec: Generic 14f1 ID 2bfa
Address: 1
Vendor Id: 0x14f12bfa
Subsystem Id: 0x14f100c3
Revision Id: 0x90000
-------------------------------
Current support status of HDA cards is:
Vendor IDs Chip maker Support type
---------- ---------- -------------
0x14f12bfa Conexant hsfmodem , not slmodemd compatible
0x11c13026 AgereSystems snd-hda-intel, slmodemd supported
0x11c11040 AgereSystems " " , patch needed
0x11c13055 AgereSystems " " , "
0x163c3055 Smartlink " " , "
0x163c3155 " " " , "
0x10573055 Motorola " " , "
0x10573155 " " " , ""
as of October 2006.
and from the command:
aplay -l | grep -i modem
----------------end Softmodem section --------------
Writing Intel.txt
Formal support for Conexant chipset modems are available ONLY through
http://www.linuxant.com/drivers. Read Conexant.txt for details.
and Modem/YourSystem.txt for follow through guidance. Driver speed is limited to
14,400 until a key is purchased. There is NO freeware alternative.
There are two support package types: hsfmodem and hcflinmodem.
http://www.lorenzobettini.it/linux/LinuxSonyVaioVGN-S5VP_B reports a
problem and solution in stalling a key, after testing of the free low
speed download.
The hsfmodem package serves a great variety of Conexant chipset modems.
But for High Definition Audio cards hosting Conexant softmodems, and
kernels before 2.6.16, a patched version must be used and is available
at http://linmodems.technion.ac.il/packages/hsfhda/ . Under Linux do:
$ tar zxf hsf*.tar.gz
$ cd hsfmodem-7.47.00.03full
Look around:
$ ls
Install the package with:
$ sudo make install
$ sudo hsfconfig
should complete the setup. See wvdial.txt for follow through information.
Read Conexant.txt
Writing Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
The kernel was compiled with gcc version 4.0.3 and a compiler is not installed
If compiling a modem driver proves to be necessary, one of the two procedures must be followed.
If not yet on the Internet, put the Dapper install CD in the drive
Open a terminal and therein:
$ sudo apt-get install gcc-4.0 make
Additionally the package linux-headers-2.6.15-26-386 must be downloaded.
Go to http://packages.ubuntu.com/ and search for linux-headers-2.6.15-26-386
After downloading, it can be installed with:
$ sudo dpkg -i linux-header*.deb
Or alternatively if online through Ethernet do:
$ sudo apt-get update
$ sudo apt-get install build-essential
will do all the necessary installations mentioned above.
In either installation case, set a symbolic link which will be expected later:
$ sudo ln -s /usr/bin/gcc-4.0 /usr/bin/gcc
After check with:
$ ls -l /usr/bin/gcc*
which should display:
lrwxrwxrwx 1 root root 16 2006-07-09 21:53 /usr/bin/gcc -> /usr/bin/gcc-4.0
-rwxr-xr-x 1 root root 93584 2006-04-20 18:22 /usr/bin/gcc-4.0
-rwxr-xr-x 1 root root 16245 2006-04-20 18:13 /usr/bin/gccbug-4.0
Kernel-header resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
gcc-4.0 make linux-headers-2.6.15-26-386
Checking pppd properties:
-rwsr-xr-- 1 root dip 257720 2006-07-05 08:00 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
auth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/60-symlinks.rules:# Create /dev/modem symlink
/etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*", SYMLINK+="modem"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
If you do not already know, find out in your ModemData.txt if your modem is of
type HSF or of type HCF.
In the following, HxF stands for the one to be used.
Note down your distribution, your processor, and your kernel (shown in the
System Information section of ModemData.txt).
-Go to http://www.linuxant.com/drivers
-Find the HxF menu in the left part of the screen.
-Read README.
-Read INSTALLATION.
-Click DOWNLOAD.
-Accept conditions.
-Find text: "You can download HxF modem packages from the driver
download page." and click on that link.
-I very strongly recommend NOT TO LET YOURSELF BE ATTRACTED BY THE AUTOMATIC
INSTALLER cnxtinstall.run. Just think: you need a connection to be able to use
it, and this is what you do not have yet. Use the direct download page.
Its address is http://www.linuxant.com/drivers/hsf/full/downloads.php
Using it will not save you any time, on the contrary, because you will not know
what to look for and do with it.
-Since you have noted your distribution, your processor, and your kernel
(shown in the System Information section of ModemData.txt), identify the
matching file.
-Download the matching file.
-Read again and, if you read this text under Windows, print the installation
instructions matching the kind of driver file which you downloaded.
-If downloaded elsewhere (Windows on same computer or using an other computer),
copy the downloaded file to your Linux working space.
-Now, under Linux, just follow the Linuxant installation instructions.
NOTE: the space on a floppy disk is sufficient for the driver file. This
is the simplest way to download under Windows on the same computer or to
download on an other computer.
More tips to transfer files are available in
http://linmodems.technion.ac.il/first.html