Felix,
Just for statistical purposes, can you please tell us if you had
inserted the line
Carrier Check = no
in your file /etc/wvdial.conf
BEFORE sending your call for help?
Your report is remarkably complete, should be an example for many
people, but is lacking that small detail, which as you see is essential
to help you.
Thanks in advance - Jacques
Antonio Olivares wrote:
--- Felix Bolivar <fbolivar@xxxxxxxxxxxxx> wrote:
- I unpacked succesfuly the slmodemd file
sudo chmod +x slmodemd
- copy on the /usr/bin/
cp slmodemd /usr/bin/
- executed
sudo slmodemd -c USA --alsa -s hw:0,1
got the following
SmartLink Soft Modem: version 2.9.11 Feb 15 2007
23:08:19
symbolic link /dev/ttySL0' -> /dev/pts/1' created.
modem hw:0,1' created. TTY is /dev/pts/1'
Use /dev/ttySL0' as modem device, Ctrl+C for
termination.
- After that open a new Terminal screen:
sudo wvdialconf /etc/wvdial.conf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next
try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next
try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200,
giving up.
Modem Port Scan<*1>: S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttySL0<*1>: ATQ0 V1 E1 -- OK
ttySL0<*1>: ATQ0 V1 E1 Z -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft
Modem
ttySL0<*1>: Speed 4800: AT -- OK
ttySL0<*1>: Speed 9600: AT -- OK
ttySL0<*1>: Speed 19200: AT -- OK
ttySL0<*1>: Speed 38400: AT -- OK
ttySL0<*1>: Speed 57600: AT -- OK
ttySL0<*1>: Speed 115200: AT -- OK
ttySL0<*1>: Speed 230400: AT -- OK
ttySL0<*1>: Speed 460800: AT -- OK
ttySL0<*1>: Max speed is 460800; that should be
safe.
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Found a modem on /dev/ttySL0.
Modem configuration written to /etc/wvdial.conf.
ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0
&C1 &D2 +FCLASS=0"
- Finally execute
sudo wvdial
--> WvDial: Internet dialer version 1.56
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT05000992000
--> Waiting for carrier.
ATDT05000992000
NO DIALTONE
--> No dial tone.
--> Disconnecting at Tue Mar 13 00:07:27 2007
- Then I tested with the countries listed at the
CountryList.txt file
running
sudo slmodemd -c COUNTRYNAME --alsa -s hw:0,1
using each country name on that file, but getting
the same NO DIALTONE
message.
am I missing some step ?
You can add X3 to the dialing step in wvdial.conf
in the "Init2 = " part
in my case the following does the trick.
X3 &C1 &D2 +MS=90
[olivares@localhost ~]$ cat /etc/wvdial.conf
[Dialer Defaults]
Modem = /dev/ttySL0
Baud = 460800
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
ISDN = 0
Modem Type = Analog Modem
Phone = 7072000
Username = aaolivares
Password = mypassword
Carrier Check = no
Stupid Mode = 1
Auto DNS = yes
Try this and report back. If the case is that this
does not work, please execute
$ dmesg
and send the last few lines or any relevant output
that you might get.
Regards,
Antonio
Thanks
Félix
Felix Bolivar wrote:
Thanks !
I'm going to test it and be in touch with you !
Felix
Marvin Stodolsky wrote:
Felix,
Your modem is a Subsystem under
00:06.0 Multimedia audio controller: ALi
Corporation M5451 PCI
AC-Link Controller Audio Device (rev 01)
with SUBSYS_00011179 typically having an
AgereSystems softmodem chip
Download from
http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a
compiled slmodemd. Unpack
under Linux with:
$ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the
modem is setup with
command:
sudo slmodemd -c YOUR_COUNTRY --alsa -s
hw:0,1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some
number
Read Smartlink.txt and Modem/YourSystem.txt for
follow through guidance.
VENEZUELA is not among the countries output by
$ slmodemd --countrylist
For YOUR_COUNTRY, you can use USA for initial
testing.
But check with your local Linux group through
http://www.linux.org/groups/index.html
to assess what CountryCode they are using
MarvS
scanModem maintainer
On 3/11/07, Felix Bolivar
<fbolivar@xxxxxxxxxxxxx> wrote:
Please help me configure this winmodem in my
computer: Toshiba
Satellite
1805-S207
Have WinXP and Ubuntu 6.10 running y two
partitions. But not being able
to configure mi winmodem from Linux.
Thanks in advance !!!
Félix
Data obtained from windows - Device Manager -
Modem
Hardware ID:
PCI\VEN_10B9&DEV_5450&SUBSYS_00011179
--
-- from this URL obtained the vendor and chip
http://www.pcidatabase.com
0x10B9 Ali Corporation
0x5450 Chip Description: Agere Systems AC97
Modem
--
-- modem diagnostics
AT+GMM H.324 video-ready rev. 1.0
AT+FCLASS=? 0,1
AT+GCI? +GCI:B5
ATI3 TOSHIBA V.90 Data+Fax Software Modem
Version 3.1.98
ATI4 Built on 08/27/2001 15:37:22
ATI5 3.1.98, AMR ALi MB, AC97 ID:SIL
REV:0x27, 19
ATI7 AMR ALi MB
--
Only plain text email is forwarded by the
DISCUSS@xxxxxxxxxxxxx
List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Ubuntu 6.10
kernel 2.6.17-10-generic
This will alert cogent experts, and
distinguish cases in the
Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an
Internet Provider mail
filters.
So in a day, also check the Archived responses
at
http://www.linmodems.org .
Local Linux experts can be found through:
http://www.linux.org/groups/index.html
-------------------------- System information
----------------------------
CPU=i686, Ubuntu 6.10
Linux version 2.6.17-10-generic (root@vernadsky)
(gcc version 4.1.2
20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5))
#2 SMP Fri Oct 13
18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
scanModem update of: 2007_March_05
=== message truncated ===> begin:vcard
fn:Felix Bolivar
n:Bolivar;Felix
org:Synergix Solutions
adr:Los Dos Caminos;;Av. Sucre, Torre Centro, piso
9, ofic:9-4;Caracas;DF;1050;Venezuela
email;internet:fbolivar@xxxxxxxxxxxxx
tel;work:58.212.2852284
tel;cell:58.414.3261197
x-mozilla-html:TRUE
version:2.1
end:vcard
____________________________________________________________________________________
Now that's room service! Choose from over 150,000 hotels
in 45,000 destinations on Yahoo! Travel to find your fit.
http://farechase.yahoo.com/promo-generic-14795097
