PG Archival info is lacking on: Primary PCI_id 1039:7013 Subsystem PCI_id 104d:8134and the diagnostics did not complete. Forward steps are one:>From the Device Manager under Microsoft try to get some chipset info.Read SoftModem.txt for howto details. Detach all your USB devices which may be competing, and run$ sudo ./scanModemSend us the new ModemData.txt and any Info from the Microsoft boot. But the modem controller type should be alternatively (not both)supported by either ALSA drives or the Linuxant hsfmodem package. MarvSscanModem maintainer On 2/13/07, pgilbert22@xxxxxxx <pgilbert22@xxxxxxx> wrote:> To whom it may concern,>> I have a Sony VAIO computer, on which I recently installed Ubuntu> 6.06 alongside the already-installed Windows XP, to make it a dual-> boot. The Ubuntu is unable to detect the modem, which makes Ubuntu> fairly useless to me; I would like to fix this, if possible.>> Here is information you may need to analyze the problem... I'm> subjoining the contents of two files, one, ModemData.txt, the other,> dmesg.txt. Many thanks for any help you can give.>> Peter>>> * * *>> Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List> Server.> Do use the following as the email Subject Line:> SomeName, YourCountry Ubuntu 6.06 LTS kernel 2.6.15-23-386> This will alert cogent experts, and distinguish cases in the Archives.> YourCountry will enable Country Code guidance.> Occassionally responses are blocked by an Internet Provider mail> filters.> So in a day, also check the Archived responses at http://> www.linmodems.org .> Local Linux experts can be found through: http://www.linux.org/groups/> index.html> -------------------------- System information> ----------------------------> CPU=i686, Ubuntu 6.06 LTS> Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3> (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006> scanModem update of: 2007_Jan_22>>> USB modem not detected by lsusb>> Modem or host audio card candidates have firmware information:>> PCI slot PCI ID SubsystemID Name> ---------- --------- --------- --------------> 0000:00:02.6 1039:7013 104d:8134 Modem: Silicon Integrated> Systems [SiS] AC'97 Modem Controller>> Modem interrupt assignment and sharing:> 177: 7035 IO-APIC-level ohci1394, yenta, SiS SI7012>> --- Bootup diagnositcs for card in PCI slot 0000:00:02.6 ----> [4294670.207000] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18> (level, low) -> IRQ 177> [4294670.207000] ACPI: PCI interrupt for device 0000:00:02.6 disabled>> The PCI slot 0000:00:02.6 of the modem card may be disabled early in> a bootup process, but then enabled later. If modem drivers load> but the modem is not responsive, read Bootup.txt about possible fixes.> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx> if help is needed.>> === Finished modem firmware and bootup diagnostics section. ===> === Next deducing cogent software ===>> ALSAversion 1.0.10>>> * * *>> CPU0> 0: 36305717 IO-APIC-edge timer> 1: 3471 IO-APIC-edge i8042> 8: 6 IO-APIC-edge rtc> 14: 50909 IO-APIC-edge ide0> 15: 642760 IO-APIC-edge ide1> 169: 12410 IO-APIC-level acpi, ohci_hcd:usb1> 177: 7035 IO-APIC-level ohci1394, yenta, SiS SI7012> 185: 0 IO-APIC-level yenta> 201: 285319 IO-APIC-level ohci_hcd:usb2> 209: 0 IO-APIC-level ohci_hcd:usb3> 217: 35024 IO-APIC-level ehci_hcd:usb4> 225: 0 IO-APIC-level eth0> NMI: 0> LOC: 36303466> ERR: 0> MIS: 0>> [4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc> version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40> UTC 2006> [4294667.296000] BIOS-provided physical RAM map:> [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00> (usable)> [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000> (reserved)> [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000> (reserved)> [4294667.296000] BIOS-e820: 0000000000100000 - 000000001dffc000> (usable)> [4294667.296000] BIOS-e820: 000000001dffc000 - 000000001dfff000> (ACPI data)> [4294667.296000] BIOS-e820: 000000001dfff000 - 000000001e000000> (ACPI NVS)> [4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000> (reserved)> [4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000> (reserved)> [4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000> (reserved)> [4294667.296000] 0MB HIGHMEM available.> [4294667.296000] 479MB LOWMEM available.> [4294667.296000] On node 0 totalpages: 122876> [4294667.296000] DMA zone: 4096 pages, LIFO batch:0> [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0> [4294667.296000] Normal zone: 118780 pages, LIFO batch:31> [4294667.296000] HighMem zone: 0 pages, LIFO batch:0> [4294667.296000] DMI 2.3 present.> [4294667.296000] ACPI: RSDP (v000> ASUS ) @ 0x000f63b0> [4294667.296000] ACPI: RSDT (v001 ASUS SAPPHIRE 0x42302e31 MSFT> 0x31313031) @ 0x1dffc000> [4294667.296000] ACPI: FADT (v001 ASUS SAPPHIRE 0x42302e31 MSFT> 0x31313031) @ 0x1dffc100> [4294667.296000] ACPI: BOOT (v001 ASUS SAPPHIRE 0x42302e31 MSFT> 0x31313031) @ 0x1dffc040> [4294667.296000] ACPI: MADT (v001 ASUS SAPPHIRE 0x42302e31 MSFT> 0x31313031) @ 0x1dffc080> [4294667.296000] ACPI: DSDT (v001 ASUS SAPPHIRE 0x00001000 MSFT> 0x0100000b) @ 0x00000000> [4294667.296000] ACPI: PM-Timer IO Port: 0xe408> [4294667.296000] ACPI: Local APIC address 0xfee00000> [4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)> [4294667.296000] Processor #0 15:2 APIC version 20> [4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])> [4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])> [4294667.296000] IOAPIC[0]: apic_id 2, version 128, address> 0xfec00000, GSI 0-23> [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl> edge)> [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low> level)> [4294667.296000] ACPI: IRQ0 used by override.> [4294667.296000] ACPI: IRQ2 used by override.> [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs> [4294667.296000] Using ACPI (MADT) for SMP configuration information> [4294667.296000] Allocating PCI resources starting at 20000000 (gap:> 1e000000:e0c00000)> [4294667.296000] Built 1 zonelists> [4294667.296000] Kernel command line: root=/dev/hda3 ro quiet splash> [4294667.296000] mapped APIC to ffffd000 (fee00000)> [4294667.296000] mapped IOAPIC to ffffc000 (fec00000)> [4294667.296000] Initializing CPU#0> [4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)> [4294667.296000] Detected 1792.857 MHz processor.> [4294667.296000] Using pmtmr for high-res timesource> [4294667.296000] Console: colour VGA+ 80x25> [4294668.619000] Dentry cache hash table entries: 65536 (order: 6,> 262144 bytes)> [4294668.619000] Inode-cache hash table entries: 32768 (order: 5,> 131072 bytes)> [4294668.636000] Memory: 476468k/491504k available (1976k kernel> code, 14384k reserved, 606k data, 288k init, 0k highmem)> [4294668.636000] Checking if this processor honours the WP bit even> in supervisor mode... Ok.> [4294668.696000] Calibrating delay using timer specific routine..> 3587.69 BogoMIPS (lpj=1793849)> [4294668.696000] Security Framework v1.0.0 initialized> [4294668.696000] SELinux: Disabled at boot.> [4294668.696000] Mount-cache hash table entries: 512> [4294668.696000] CPU: After generic identify, caps: 3febfbff 00000000> 00000000 00000000 00000000 00000000 00000000> [4294668.696000] CPU: After vendor identify, caps: 3febfbff 00000000> 00000000 00000000 00000000 00000000 00000000> [4294668.696000] CPU: Trace cache: 12K uops, L1 D cache: 8K> [4294668.696000] CPU: L2 cache: 512K> [4294668.696000] CPU: After all inits, caps: 3febfbff 00000000> 00000000 00000080 00000000 00000000 00000000> [4294668.696000] mtrr: v2.0 (20020519)> [4294668.696000] CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 04> [4294668.696000] Enabling fast FPU save and restore... done.> [4294668.696000] Enabling unmasked SIMD FPU exception support... done.> [4294668.696000] Checking 'hlt' instruction... OK.> [4294668.700000] checking if image is initramfs... it is> [4294669.533000] Freeing initrd memory: 6836k freed> [4294669.545000] ACPI: Looking for DSDT ... not found!> [4294669.547000] ENABLING IO-APIC IRQs> [4294669.547000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1> [4294669.658000] NET: Registered protocol family 16> [4294669.658000] EISA bus registered> [4294669.658000] ACPI: bus type pci registered> [4294669.659000] PCI: PCI BIOS revision 2.10 entry at 0xf2520, last> bus=1> [4294669.659000] PCI: Using configuration type 1> [4294669.660000] ACPI: Subsystem revision 20051216> [4294669.663000] ACPI: Interpreter enabled> [4294669.663000] ACPI: Using IOAPIC for interrupt routing> [4294669.664000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10> 11 12 14 15)> [4294669.664000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10> 11 *12 14 15)> [4294669.665000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10> 11 12 14 15)> [4294669.665000] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10> 11 12 14 15)> [4294669.665000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10> 11 12 14 15)> [4294669.666000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10> 11 12 14 15)> [4294669.666000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 10> 11 12 14 15)> [4294669.666000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10> 11 12 14 15) *9> [4294669.668000] ACPI: PCI Root Bridge [PCI0] (0000:00)> [4294669.668000] PCI: Probing PCI hardware (bus 00)> [4294669.668000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0> [4294669.674000] Enabling SiS 96x SMBus.> [4294669.674000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5> [4294669.675000] Boot video device is 0000:01:00.0> [4294669.675000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]> [4294669.793000] ACPI: PCI Interrupt Routing Table> [\_SB_.PCI0.PCI1._PRT]> [4294669.806000] Linux Plug and Play Support v0.97 (c) Adam Belay> [4294669.806000] pnp: PnP ACPI init> [4294669.812000] pnp: PnP ACPI: found 11 devices> [4294669.812000] PnPBIOS: Disabled by ACPI PNP> [4294669.812000] PCI: Using ACPI for IRQ routing> [4294669.812000] PCI: If a device doesn't work, try "pci=routeirq".> If it helps, post a report> [4294669.823000] pnp: 00:01: ioport range 0xe400-0xe47f could not be> reserved> [4294669.823000] pnp: 00:01: ioport range 0xe480-0xe4ff has been> reserved> [4294669.823000] pnp: 00:01: ioport range 0xe600-0xe61f has been> reserved> [4294669.823000] pnp: 00:01: ioport range 0x480-0x48f has been reserved> [4294669.823000] pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved> [4294669.823000] PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0> [4294669.823000] PCI: Bridge: 0000:00:01.0> [4294669.823000] IO window: d000-dfff> [4294669.823000] MEM window: eb800000-ebffffff> [4294669.823000] PREFETCH window: f0000000-febfffff> [4294669.823000] PCI: Bus 2, cardbus bridge: 0000:00:0b.0> [4294669.823000] IO window: 00001000-000010ff> [4294669.823000] IO window: 00001400-000014ff> [4294669.823000] PREFETCH window: 20000000-21ffffff> [4294669.823000] MEM window: 22000000-23ffffff> [4294669.823000] PCI: Bus 6, cardbus bridge: 0000:00:0b.1> [4294669.823000] IO window: 00001800-000018ff> [4294669.823000] IO window: 00001c00-00001cff> [4294669.823000] PREFETCH window: 24000000-25ffffff> [4294669.823000] MEM window: 26000000-27ffffff> [4294669.823000] PCI: Setting latency timer of device 0000:00:01.0 to 64> [4294669.823000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18> (level, low) -> IRQ 177> [4294669.823000] PCI: Enabling device 0000:00:0b.1 (0000 -> 0003)> [4294669.823000] ACPI: PCI Interrupt 0000:00:0b.1[B] -> GSI 19> (level, low) -> IRQ 185> [4294669.823000] Simple Boot Flag at 0x3a set to 0x1> [4294669.824000] audit: initializing netlink socket (disabled)> [4294669.824000] audit(1169749788.823:1): initialized> [4294669.824000] VFS: Disk quotas dquot_6.5.1> [4294669.824000] Dquot-cache hash table entries: 1024 (order 0, 4096> bytes)> [4294669.824000] Initializing Cryptographic API> [4294669.824000] io scheduler noop registered> [4294669.824000] io scheduler anticipatory registered> [4294669.824000] io scheduler deadline registered> [4294669.824000] io scheduler cfq registered> [4294669.825000] isapnp: Scanning for PnP cards...> [4294670.182000] isapnp: No Plug & Play device found> [4294670.202000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1> [4294670.202000] PNP: PS/2 controller doesn't have AUX irq; using> default 12> [4294670.204000] serio: i8042 KBD port at 0x60,0x64 irq 1> [4294670.205000] Serial: 8250/16550 driver $Revision: 1.90 $ 48> ports, IRQ sharing enabled> [4294670.207000] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18> (level, low) -> IRQ 177> [4294670.207000] ACPI: PCI interrupt for device 0000:00:02.6 disabled> [4294670.208000] RAMDISK driver initialized: 16 RAM disks of 65536K> size 1024 blocksize> [4294670.208000] Uniform Multi-Platform E-IDE driver Revision:> 7.00alpha2> [4294670.208000] ide: Assuming 33MHz system bus speed for PIO modes;> override with idebus=xx> [4294670.208000] mice: PS/2 mouse device common for all mice> [4294670.208000] EISA: Probing bus 0 at eisa.0> [4294670.208000] Cannot allocate resource for EISA slot 1> [4294670.208000] Cannot allocate resource for EISA slot 8> [4294670.208000] EISA: Detected 0 cards.> [4294670.208000] NET: Registered protocol family 2> [4294670.218000] IP route cache hash table entries: 4096 (order: 2,> 16384 bytes)> [4294670.218000] TCP established hash table entries: 16384 (order: 4,> 65536 bytes)> [4294670.218000] TCP bind hash table entries: 16384 (order: 4, 65536> bytes)> [4294670.218000] TCP: Hash tables configured (established 16384 bind> 16384)> [4294670.218000] TCP reno registered> [4294670.218000] TCP bic registered> [4294670.218000] NET: Registered protocol family 1> [4294670.218000] NET: Registered protocol family 8> [4294670.218000] NET: Registered protocol family 20> [4294670.218000] Using IPI Shortcut mode> [4294670.218000] ACPI wakeup devices:> [4294670.218000] PCI0 PCI1 PS2K USB0 USB3 USB1 USB2 MC97> [4294670.218000] ACPI: (supports S0 S1 S3 S4 S5)> [4294670.218000] Freeing unused kernel memory: 288k freed> [4294670.226000] input: AT Translated Set 2 keyboard as /class/input/> input0> [4294670.289000] vga16fb: initializing> [4294670.289000] vga16fb: mapped to 0xc00a0000> [4294670.388000] Console: switching to colour frame buffer device 80x30> [4294670.388000] fb0: VGA16 VGA frame buffer device> [4294671.481000] Capability LSM initialized> [4294672.256000] SIS5513: IDE controller at PCI slot 0000:00:02.5> [4294672.256000] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16> (level, low) -> IRQ 193> [4294672.256000] SIS5513: chipset revision 0> [4294672.256000] SIS5513: not 100% native mode: will probe irqs later> [4294672.256000] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller> [4294672.256000] ide0: BM-DMA at 0xa400-0xa407, BIOS settings:> hda:DMA, hdb:pio> [4294672.256000] ide1: BM-DMA at 0xa408-0xa40f, BIOS settings:> hdc:DMA, hdd:pio> [4294672.256000] Probing IDE interface ide0...> [4294672.520000] hda: SAMSUNG SV0602H, ATA DISK drive> [4294673.132000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14> [4294673.140000] Probing IDE interface ide1...> [4294673.812000] hdc: UJDA730 DVD/CDRW, ATAPI CD/DVD-ROM drive> [4294674.424000] ide1 at 0x170-0x177,0x376 on irq 15> [4294674.437000] hda: max request size: 128KiB> [4294674.449000] hda: 117304992 sectors (60060 MB) w/2048KiB Cache,> CHS=65535/16/63, UDMA(100)> [4294674.449000] hda: cache flushes supported> [4294674.449000] hda: hda1 hda2 < hda5 hda6 > hda3> [4294674.487000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache,> UDMA(33)> [4294674.487000] Uniform CD-ROM driver Revision: 3.20> [4294674.935000] usbcore: registered new driver usbfs> [4294674.936000] usbcore: registered new driver hub> [4294674.938000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host> Controller (OHCI) Driver (PCI)> [4294674.938000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20> (level, low) -> IRQ 169> [4294674.938000] ohci_hcd 0000:00:03.0: OHCI Host Controller> [4294674.940000] ohci_hcd 0000:00:03.0: new USB bus registered,> assigned bus number 1> [4294674.940000] ohci_hcd 0000:00:03.0: irq 169, io mem 0xeb000000> [4294674.993000] hub 1-0:1.0: USB hub found> [4294674.993000] hub 1-0:1.0: 2 ports detected> [4294674.997000] ieee1394: Initialized config rom entry `ip1394'> [4294675.094000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21> (level, low) -> IRQ 201> [4294675.094000] ohci_hcd 0000:00:03.1: OHCI Host Controller> [4294675.094000] ohci_hcd 0000:00:03.1: new USB bus registered,> assigned bus number 2> [4294675.094000] ohci_hcd 0000:00:03.1: irq 201, io mem 0xea800000> [4294675.147000] hub 2-0:1.0: USB hub found> [4294675.147000] hub 2-0:1.0: 2 ports detected> [4294675.248000] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22> (level, low) -> IRQ 209> [4294675.248000] ohci_hcd 0000:00:03.2: OHCI Host Controller> [4294675.248000] ohci_hcd 0000:00:03.2: new USB bus registered,> assigned bus number 3> [4294675.248000] ohci_hcd 0000:00:03.2: irq 209, io mem 0xea000000> [4294675.301000] hub 3-0:1.0: USB hub found> [4294675.301000] hub 3-0:1.0: 2 ports detected> [4294675.404000] ohci1394: $Rev: 1313 $ Ben Collins> <bcollins@xxxxxxxxxx>> [4294675.404000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18> (level, low) -> IRQ 177> [4294675.410000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23> (level, low) -> IRQ 217> [4294675.410000] ehci_hcd 0000:00:03.3: EHCI Host Controller> [4294675.410000] PCI: cache line size of 128 is not supported by> device 0000:00:03.3> [4294675.410000] ehci_hcd 0000:00:03.3: new USB bus registered,> assigned bus number 4> [4294675.410000] ehci_hcd 0000:00:03.3: irq 217, io mem 0xe9800000> [4294675.410000] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00,> driver 10 Dec 2004> [4294675.410000] hub 4-0:1.0: USB hub found> [4294675.410000] hub 4-0:1.0: 6 ports detected> [4294675.455000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]> MMIO=[e8800000-e88007ff] Max Packet=[2048]> [4294675.665000] Attempting manual resume> [4294675.694000] kjournald starting. Commit interval 5 seconds> [4294675.694000] EXT3-fs: mounted filesystem with ordered data mode.> [4294675.974000] usb 2-2: new low speed USB device using ohci_hcd and> address 3> [4294676.711000] ieee1394: Host added: ID:BUS[0-00:1023] GUID> [080046030138c65e]> [4294689.697000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5> [4294689.701000] shpchp: Standard Hot Plug PCI Controller Driver> version: 0.4> [4294689.790000] Linux agpgart interface v0.101 (c) Dave Jones> [4294689.808000] agpgart: Detected SiS 650 chipset> [4294689.813000] agpgart: AGP aperture is 64M @ 0xec000000> [4294690.000000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18> (level, low) -> IRQ 177> [4294690.000000] Yenta: CardBus bridge found at 0000:00:0b.0 [104d:810a]> [4294690.071000] i2c-sis96x version 1.0.0> [4294690.071000] sis96x_smbus 0000:00:02.1: SiS96x SMBus base> address: 0xe600> [4294690.122000] Yenta: ISA IRQ mask 0x06b8, PCI irq 177> [4294690.122000] Socket status: 30000006> [4294690.123000] ACPI: PCI Interrupt 0000:00:0b.1[B] -> GSI 19> (level, low) -> IRQ 185> [4294690.123000] Yenta: CardBus bridge found at 0000:00:0b.1 [104d:810a]> [4294690.245000] Yenta: ISA IRQ mask 0x06b8, PCI irq 185> [4294690.245000] Socket status: 30000006> [4294690.952000] Real Time Clock Driver v1.12> [4294691.196000] 8139too Fast Ethernet driver 0.9.27> [4294691.198000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 17> (level, low) -> IRQ 225> [4294691.200000] eth0: RealTek RTL8139 at 0xdea56000, 00:e0:18:ed:> 52:ed, IRQ 225> [4294691.200000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'> [4294691.221000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18> (level, low) -> IRQ 177> [4294691.251000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)> [4294691.707000] cs: IO port probe 0x100-0x3af: excluding 0x240-0x247> 0x290-0x297> [4294691.709000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7> [4294691.710000] cs: IO port probe 0x820-0x8ff: clean.> [4294691.711000] cs: IO port probe 0xc00-0xcf7: clean.> [4294691.712000] cs: IO port probe 0xa00-0xaff: clean.> [4294691.725000] cs: IO port probe 0x100-0x3af: excluding 0x240-0x247> 0x290-0x297> [4294691.727000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7> [4294691.727000] cs: IO port probe 0x820-0x8ff: clean.> [4294691.728000] cs: IO port probe 0xc00-0xcf7: clean.> [4294691.729000] cs: IO port probe 0xa00-0xaff: clean.> [4294691.767000] input: PC Speaker as /class/input/input1> [4294691.833000] usbcore: registered new driver hiddev> [4294691.846000] input: Logitech Optical USB Mouse as /class/input/> input2> [4294691.847000] input: USB HID v1.10 Mouse [Logitech Optical USB> Mouse] on usb-0000:00:03.1-2> [4294691.847000] usbcore: registered new driver usbhid> [4294691.847000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver> [4294691.885000] ts: Compaq touchscreen protocol output> [4294692.033000] intel8x0_measure_ac97_clock: measured 50380 usecs> [4294692.033000] intel8x0: clocking to 48000> [4294692.371000] eth0: link down> [4294692.532000] lp: driver loaded but no devices found> [4294692.621000] SCSI subsystem initialized> [4294692.631000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@xxxxxxxxxx>> [4294692.631000] ieee1394: sbp2: Driver forced to serialize I/O> (serialize_io=1)> [4294692.631000] ieee1394: sbp2: Try serialize_io=0 for better> performance> [4294692.716000] Adding 1413680k swap on /dev/hda6. Priority:-1> extents:1 across:1413680k> [4294692.838000] EXT3 FS on hda3, internal journal> [4294693.053000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27> [4294693.053000] md: bitmap version 4.39> [4294693.809000] NET: Registered protocol family 17> [4294693.960000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:> dm-devel@xxxxxxxxxx> [4294694.682000] cdrom: open failed.> [4294701.936000] ACPI: Power Button (FF) [PWRF]> [4294701.936000] ACPI: Power Button (CM) [PWRB]> [4294702.087000] ibm_acpi: ec object not found> [4294702.118000] pcc_acpi: loading...> [4294709.341000] ppdev: user-space parallel port driver> [4294710.659000] apm: BIOS version 1.2 Flags 0x0b (Driver version> 1.16ac)> [4294710.659000] apm: overridden by ACPI.> [4294715.183000] Bluetooth: Core ver 2.8> [4294715.183000] NET: Registered protocol family 31> [4294715.183000] Bluetooth: HCI device and connection manager> initialized> [4294715.183000] Bluetooth: HCI socket layer initialized> [4294715.262000] Bluetooth: L2CAP ver 2.8> [4294715.262000] Bluetooth: L2CAP socket layer initialized> [4294715.278000] Bluetooth: RFCOMM socket layer initialized> [4294715.278000] Bluetooth: RFCOMM TTY layer initialized> [4294715.278000] Bluetooth: RFCOMM ver 1.7> [4294734.586000] NET: Registered protocol family 10> [4294734.586000] lo: Disabled Privacy Extensions> [4294734.586000] ADDRCONF(NETDEV_UP): eth0: link is not ready> [4294734.587000] IPv6 over IPv4 tunneling driver> [4297375.325000] ACPI: PCI interrupt for device 0000:00:12.0 disabled> [4297378.507000] Stopping tasks:> ========================================================================> ===|> [4297378.509000] Shrinking memory... -\|/-done (69171 pages> freed)> [4297379.416000] ACPI: PCI interrupt for device 0000:00:0b.1 disabled> [4297379.417000] ACPI: PCI interrupt for device 0000:00:0b.0 disabled> [4297379.417000] ACPI: PCI interrupt for device 0000:00:03.3 disabled> [4297379.428000] ACPI: PCI interrupt for device 0000:00:03.2 disabled> [4297379.428000] ACPI: PCI interrupt for device 0000:00:03.1 disabled> [4297379.428000] ACPI: PCI interrupt for device 0000:00:03.0 disabled> [4297379.428000] ACPI: PCI interrupt for device 0000:00:02.7 disabled> [4297379.428000] swsusp: Need to copy 47612 pages> [4297379.428000] swsusp: Restoring Highmem> [4301878.478000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18> (level, low) -> IRQ 177> [4301878.730000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20> (level, low) -> IRQ 169> [4301878.730000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21> (level, low) -> IRQ 201> [4301878.730000] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22> (level, low) -> IRQ 209> [4301878.741000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23> (level, low) -> IRQ 217> [4301878.741000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18> (level, low) -> IRQ 177> [4301878.741000] ACPI: PCI Interrupt 0000:00:0b.1[B] -> GSI 19> (level, low) -> IRQ 185> [4301878.741000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18> (level, low) -> IRQ 177> [4301878.986000] Restarting tasks... done> [4301880.450000] hdc: drive_cmd: status=0x51 { DriveReady> SeekComplete Error }> [4301880.450000] hdc: drive_cmd: error=0x04 { AbortedCommand }> [4301880.450000] ide: failed opcode was: 0xec> [4301883.141000] 8139too Fast Ethernet driver 0.9.27> [4301883.144000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 17> (level, low) -> IRQ 225> [4301883.146000] eth0: RealTek RTL8139 at 0xdec30000, 00:e0:18:ed:> 52:ed, IRQ 225> [4301883.146000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'> [4301883.963000] eth0: link down> [4301883.963000] ADDRCONF(NETDEV_UP): eth0: link is not ready> [4301886.662000] ACPI: Power Button (FF) [PWRF]> [4301886.663000] ACPI: Power Button (CM) [PWRB]> [4301990.800000] usb 1-2: new full speed USB device using ohci_hcd> and address 2> [4301991.352000] input: AlphaSmart, Inc. AlphaSmart as /class/input/> input3> [4301991.352000] input: USB HID v1.00 Keyboard [AlphaSmart, Inc.> AlphaSmart] on usb-0000:00:03.0-2> [4303179.833000] usb 1-2: USB disconnect, address 2> [4308486.106000] CSLIP: code copyright 1989 Regents of the University> of California> [4308486.113000] PPP generic driver version 2.4.2> [4309277.690000] usb 4-4: new high speed USB device using ehci_hcd> and address 4> [4309277.999000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional> printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0820> [4309277.999000] usbcore: registered new driver usblp> [4309278.000000] drivers/usb/class/usblp.c: v0.13: USB Printer Device> Class driver> [4309630.940000] usb 4-1: new high speed USB device using ehci_hcd> and address 5> [4309631.220000] Initializing USB Mass Storage driver...> [4309631.221000] scsi0 : SCSI emulation for USB Mass Storage devices> [4309631.222000] usb-storage: device found at 5> [4309631.222000] usb-storage: waiting for device to settle before> scanning> [4309631.222000] usbcore: registered new driver usb-storage> [4309631.222000] USB Mass Storage support registered.> [4309636.223000] Vendor: Generic Model: STORAGE DEVICE Rev: 1.02> [4309636.223000] Type: Direct-Access ANSI> SCSI revision: 00> [4309636.227000] usb-storage: device scan complete> [4309636.281000] Driver 'sd' needs updating - please use bus_type> methods> [4309636.548000] SCSI device sda: 512000 512-byte hdwr sectors (262 MB)> [4309636.654000] usb 4-1: reset high speed USB device using ehci_hcd> and address 5> [4309637.143000] usb 4-1: reset high speed USB device using ehci_hcd> and address 5> [4309637.632000] usb 4-1: reset high speed USB device using ehci_hcd> and address 5> [4309637.752000] sda: Write Protect is off> [4309637.753000] sda: Mode Sense: 02 00 00 00> [4309637.753000] sda: assuming drive cache: write through> [4309638.021000] SCSI device sda: 512000 512-byte hdwr sectors (262 MB)> [4309638.126000] usb 4-1: reset high speed USB device using ehci_hcd> and address 5> [4309638.615000] usb 4-1: reset high speed USB device using ehci_hcd> and address 5> [4309639.104000] usb 4-1: reset high speed USB device using ehci_hcd> and address 5> [4309639.224000] sda: Write Protect is off> [4309639.225000] sda: Mode Sense: 02 00 00 00> [4309639.225000] sda: assuming drive cache: write through> [4309639.225000] sda: sda1> [4309639.491000] sd 0:0:0:0: Attached scsi removable disk sda> [4309639.505000] sd 0:0:0:0: Attached scsi generic sg0 type 0> [4309641.920000] FAT: utf8 is not a recommended IO charset for FAT> filesystems, filesystem will be case sensitive!> [4313137.984000] usb 4-1: USB disconnect, address 5> [4329767.836000] ACPI: PCI interrupt for device 0000:00:12.0 disabled> [4329770.663000] Stopping tasks:> ========================================================================> =======|> [4329770.665000] Shrinking memory... -\|/done (55135 pages freed)> [4329770.820000] usblp 4-4:1.1: no suspend for driver usblp?> [4329771.583000] ACPI: PCI interrupt for device 0000:00:0b.1 disabled> [4329771.583000] ACPI: PCI interrupt for device 0000:00:0b.0 disabled> [4329771.583000] ACPI: PCI interrupt for device 0000:00:03.3 disabled> [4329771.594000] ACPI: PCI interrupt for device 0000:00:03.2 disabled> [4329771.594000] ACPI: PCI interrupt for device 0000:00:03.1 disabled> [4329771.594000] ACPI: PCI interrupt for device 0000:00:03.0 disabled> [4329771.594000] ACPI: PCI interrupt for device 0000:00:02.7 disabled> [4329771.594000] swsusp: Need to copy 52678 pages> [4329771.594000] swsusp: Restoring Highmem> [4388445.086000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18> (level, low) -> IRQ 177> [4388445.338000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20> (level, low) -> IRQ 169> [4388445.338000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21> (level, low) -> IRQ 201> [4388445.338000] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22> (level, low) -> IRQ 209> [4388445.349000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23> (level, low) -> IRQ 217> [4388445.349000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18> (level, low) -> IRQ 177> [4388445.349000] ACPI: PCI Interrupt 0000:00:0b.1[B] -> GSI 19> (level, low) -> IRQ 185> [4388445.349000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18> (level, low) -> IRQ 177> [4388445.594000] usblp 4-4:1.1: no resume for driver usblp?> [4388445.594000] Restarting tasks... done> [4388447.315000] 8139too Fast Ethernet driver 0.9.27> [4388447.317000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 17> (level, low) -> IRQ 225> [4388447.318000] eth0: RealTek RTL8139 at 0xdeb08000, 00:e0:18:ed:> 52:ed, IRQ 225> [4388447.319000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'> [4388449.235000] eth0: link down> [4388449.236000] ADDRCONF(NETDEV_UP): eth0: link is not ready> [4388450.799000] ACPI: Power Button (FF) [PWRF]> [4388450.799000] ACPI: Power Button (CM) [PWRB]> [4389931.904000] eth0: link down> [4389931.904000] ADDRCONF(NETDEV_UP): eth0: link is not ready> [4390253.573000] eth0: link down> [4390253.573000] ADDRCONF(NETDEV_UP): eth0: link is not ready> [4391053.548000] usb 4-1: new high speed USB device using ehci_hcd> and address 6> [4391053.680000] scsi1 : SCSI emulation for USB Mass Storage devices> [4391053.680000] usb-storage: device found at 6> [4391053.680000] usb-storage: waiting for device to settle before> scanning> [4391058.681000] Vendor: Generic Model: STORAGE DEVICE Rev: 1.02> [4391058.681000] Type: Direct-Access ANSI> SCSI revision: 00> [4391058.947000] SCSI device sda: 512000 512-byte hdwr sectors (262 MB)> [4391059.051000] usb 4-1: reset high speed USB device using ehci_hcd> and address 6> [4391059.540000] usb 4-1: reset high speed USB device using ehci_hcd> and address 6> [4391060.029000] usb 4-1: reset high speed USB device using ehci_hcd> and address 6> [4391060.149000] sda: Write Protect is off> [4391060.149000] sda: Mode Sense: 02 00 00 00> [4391060.149000] sda: assuming drive cache: write through> [4391060.417000] SCSI device sda: 512000 512-byte hdwr sectors (262 MB)> [4391060.522000] usb 4-1: reset high speed USB device using ehci_hcd> and address 6> [4391061.011000] usb 4-1: reset high speed USB device using ehci_hcd> and address 6> [4391061.500000] usb 4-1: reset high speed USB device using ehci_hcd> and address 6> [4391061.620000] sda: Write Protect is off> [4391061.620000] sda: Mode Sense: 02 00 00 00> [4391061.620000] sda: assuming drive cache: write through> [4391061.620000] sda: sda1> [4391061.886000] sd 1:0:0:0: Attached scsi removable disk sda> [4391061.886000] sd 1:0:0:0: Attached scsi generic sg0 type 0> [4391061.887000] usb-storage: device scan complete> [4391064.988000] FAT: utf8 is not a recommended IO charset for FAT> filesystems, filesystem will be case sensitive!> [4392901.592000] usb 4-1: USB disconnect, address 6> [4393859.356000] ACPI: PCI interrupt for device 0000:00:12.0 disabled> [4393869.080000] Stopping tasks:> ========================================================================> =========|> [4393869.082000] Shrinking memory... -\|/done (51889 pages freed)> [4393870.281000] usblp 4-4:1.1: no suspend for driver usblp?> [4393870.774000] ACPI: PCI interrupt for device 0000:00:0b.1 disabled> [4393870.775000] ACPI: PCI interrupt for device 0000:00:0b.0 disabled> [4393870.775000] ACPI: PCI interrupt for device 0000:00:03.3 disabled> [4393870.786000] ACPI: PCI interrupt for device 0000:00:03.2 disabled> [4393870.786000] ACPI: PCI interrupt for device 0000:00:03.1 disabled> [4393870.786000] ACPI: PCI interrupt for device 0000:00:03.0 disabled> [4393870.786000] ACPI: PCI interrupt for device 0000:00:02.7 disabled> [4393870.786000] swsusp: Need to copy 57728 pages> [4393870.786000] swsusp: Restoring Highmem> [4644872.554000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18> (level, low) -> IRQ 177> [4644872.806000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20> (level, low) -> IRQ 169> [4644872.806000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21> (level, low) -> IRQ 201> [4644872.806000] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22> (level, low) -> IRQ 209> [4644872.817000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23> (level, low) -> IRQ 217> [4644872.817000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18> (level, low) -> IRQ 177> [4644872.817000] ACPI: PCI Interrupt 0000:00:0b.1[B] -> GSI 19> (level, low) -> IRQ 185> [4644872.817000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18> (level, low) -> IRQ 177> [4644873.062000] usblp 4-4:1.1: no resume for driver usblp?> [4644873.062000] Restarting tasks... done> [4644877.856000] 8139too Fast Ethernet driver 0.9.27> [4644877.857000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 17> (level, low) -> IRQ 225> [4644877.859000] eth0: RealTek RTL8139 at 0xdeb08000, 00:e0:18:ed:> 52:ed, IRQ 225> [4644877.859000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'> [4644879.182000] eth0: link down> [4644879.182000] ADDRCONF(NETDEV_UP): eth0: link is not ready> [4644880.151000] ACPI: Power Button (FF) [PWRF]> [4644880.152000] ACPI: Power Button (CM) [PWRB]> [4644940.560000] usb 4-4: USB disconnect, address 4> [4644940.560000] drivers/usb/class/usblp.c: usblp0: removed> [4644940.766000] usb 4-4: new high speed USB device using ehci_hcd> and address 7> [4644940.898000] scsi2 : SCSI emulation for USB Mass Storage devices> [4644940.898000] usb-storage: device found at 7> [4644940.898000] usb-storage: waiting for device to settle before> scanning> [4644945.899000] Vendor: Generic Model: STORAGE DEVICE Rev: 1.02> [4644945.899000] Type: Direct-Access ANSI> SCSI revision: 00> [4644946.165000] SCSI device sda: 512000 512-byte hdwr sectors (262 MB)> [4644946.270000] usb 4-4: reset high speed USB device using ehci_hcd> and address 7> [4644946.759000] usb 4-4: reset high speed USB device using ehci_hcd> and address 7> [4644947.248000] usb 4-4: reset high speed USB device using ehci_hcd> and address 7> [4644947.368000] sda: Write Protect is off> [4644947.368000] sda: Mode Sense: 02 00 00 00> [4644947.368000] sda: assuming drive cache: write through> [4644947.637000] SCSI device sda: 512000 512-byte hdwr sectors (262 MB)> [4644947.742000] usb 4-4: reset high speed USB device using ehci_hcd> and address 7> [4644948.231000] usb 4-4: reset high speed USB device using ehci_hcd> and address 7> [4644948.720000] usb 4-4: reset high speed USB device using ehci_hcd> and address 7> [4644948.840000] sda: Write Protect is off> [4644948.840000] sda: Mode Sense: 02 00 00 00> [4644948.840000] sda: assuming drive cache: write through> [4644948.840000] sda: sda1> [4644949.106000] sd 2:0:0:0: Attached scsi removable disk sda> [4644949.106000] sd 2:0:0:0: Attached scsi generic sg0 type 0> [4644949.107000] usb-storage: device scan complete> [4644952.264000] FAT: utf8 is not a recommended IO charset for FAT> filesystems, filesystem will be case sensitive!>>>>
