Silvano Your System CPU=i686, Ubuntu 6.10, Linux version 2.6.17-10-generichas a AC'97 Modem Controller Primary PCI_id 8086:24c6 Subsystem PCI_id 14e4:4d64 , 14e4 is an ALSA compatible identification from Archives: BCM64, a Broadcom type. Download from http://linmodems.technion.ac.il/packages/smartlink/ the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpackunder Linux with: $ tar zxf SLMODEMD.gcc4.1.tar.gzreleaseing a folder SLMODEMD.gcc4.1/ Read instructions therein. But briefly, the modem driver should beunloaded and reloaded with: sudo modprobe -r snd-intel8x0m sudo modprobe snd-intel8x0mThen try a modem setup with command: sudo slmodemd -c ITALY --alsa modem:1 reporting dynamic creation of ports: /dev/ttySL0 --> /dev/pts/N , with N some number If there is a successful: /dev/ttySL0 --> /dev/pts/NOpen another console and:$ sudo wvdialconf /etc/wvdial.confshould find the modem. Do an edit with:$ sudo gedit /etc/wvdial.conffollowing the guidance in the wvdial.txt Note that for ITALY, an X3may be necessary within the line Init2 = ATQ0 V1 E1 X3 S0=0 &C1 &D2 +FCLASS=0if dialtone detection is not effective. If all is OK, you should then be able to dialout with:$ sudo wvdial Report back if you have problems. MarvSscanModem maintainer On 2/16/07, Silvano Pirlo <spirlo2003@xxxxxxxx> wrote:> In attachement the three files that come out from the scaModem.>> Tanks for your interesting.>> Ciao, Silvano.> ----- Messaggio originale -----> Da: Jacques Goldberg <Jacques.Goldberg@xxxxxxx>> A: Silvano Pirlo <spirlo2003@xxxxxxxx>> Cc: discuss@xxxxxxxxxxxxx> Inviato: Venerdì 16 febbraio 2007, 10:49:40> Oggetto: Re: Silvano, Italy Ubuntu 6.10 kernel 2.6.17-10-generic>> Silvano,>> I do not see any file attached - but the text following your request for> help may be what you have in mind.>> Then I have one question: is THIS the complete content of the file> ModemData.txt written by scanModem in the Modem subdirectory which> scanModem has written?> If not, it is that file, ModemData.txt, which we need to help you.>> Ciao - Jacques>> Silvano Pirlo wrote:> > Hello,> >> > I need some help to configure dialup modem on my PC with Ubuntu 6.10, in attachement the result of scanModem.> >> > My machine is a DELL INSPIRON 5160 (Oct. 2004).> >> >> >> > In this moment I'm not able to connect my machine to Internet and to understanstand how to do to reach this goal.> >> >> >> > Tanks in advance for Help.> >> >> >> > Silvano.> >> >> >> > Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.> >> > Do use the following as the email Subject Line:> >> > SomeName, YourCountry Ubuntu 6.10 kernel 2.6.17-10-generic> >> > This will alert cogent experts, and distinguish cases in the Archives.> >> > YourCountry will enable Country Code guidance.> >> > Occassionally responses are blocked by an Internet Provider mail filters.> >> > So in a day, also check the Archived responses at http://www.linmodems.org .> >> > Local Linux experts can be found through: http://www.linux.org/groups/index.html> >> > -------------------------- System information ----------------------------> >> > CPU=i686, Ubuntu 6.10> >> > Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)> >> > scanModem update of: 2007_Feb_10> >> >> >> >> >> > USB modem not detected by lsusb> >> >> >> > Modem or host audio card candidates have firmware information:> >> >> >> > PCI slot PCI ID SubsystemID Name> >> > ---------- --------- --------- --------------> >> > 00:1f.6 8086:24c6 14e4:4d64 Modem: Intel Corporation 82801DB/DBL/DBM> >> >> >> > Modem interrupt assignment and sharing:> >> > 177: 585 0 IO-APIC-level Intel 82801DB-ICH4> >> >> >> > --- Bootup diagnositcs for card in PCI slot 00:1f.6 ----> >> > [17179572.976000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 177> >> > [17179572.976000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled> >> >> >> > The PCI slot 00:1f.6 of the modem card may be disabled early in> >> > a bootup process, but then enabled later. If modem drivers load> >> > but the modem is not responsive, read Bootup.txt about possible fixes.> >> > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx> >> > if help is needed.> >> >> >> >> >> > === Finished modem firmware and bootup diagnostics section. ===> >> > === Next deducing cogent software ===> >> >> >> > ALSAversion 1.0.11> >> >> >> >> >> >> >> > CPU0 CPU1> >> > 0: 109833 0 IO-APIC-edge timer> >> > 1: 817 0 IO-APIC-edge i8042> >> > 8: 3 0 IO-APIC-edge rtc> >> > 9: 1 0 IO-APIC-level acpi> >> > 12: 7040 0 IO-APIC-edge i8042> >> > 14: 3686 0 IO-APIC-edge ide0> >> > 15: 19856 0 IO-APIC-edge ide1> >> > 169: 4 0 IO-APIC-level uhci_hcd:usb1, ohci1394, yenta> >> > 177: 585 0 IO-APIC-level Intel 82801DB-ICH4> >> > 185: 4472 0 IO-APIC-level uhci_hcd:usb2> >> > 193: 0 0 IO-APIC-level uhci_hcd:usb3> >> > 201: 2 0 IO-APIC-level ehci_hcd:usb4> >> > NMI: 0 0> >> > LOC: 109658 109669> >> > ERR: 0> >> > MIS: 0> >> >> >> > [17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)> >> > [17179569.184000] BIOS-provided physical RAM map:> >> > [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)> >> > [17179569.184000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)> >> > [17179569.184000] BIOS-e820: 0000000000100000 - 000000001ffcd000 (usable)> >> > [17179569.184000] BIOS-e820: 000000001ffcd000 - 0000000020000000 (reserved)> >> > [17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec20000 (reserved)> >> > [17179569.184000] BIOS-e820: 00000000feda0000 - 00000000fee10000 (reserved)> >> > [17179569.184000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)> >> > [17179569.184000] 0MB HIGHMEM available.> >> > [17179569.184000] 511MB LOWMEM available.> >> > [17179569.184000] On node 0 totalpages: 131021> >> > [17179569.184000] DMA zone: 4096 pages, LIFO batch:0> >> > [17179569.184000] Normal zone: 126925 pages, LIFO batch:31> >> > [17179569.184000] DMI 2.3 present.> >> > [17179569.184000] ACPI: RSDP (v000 DELL ) @ 0x000fdea0> >> > [17179569.184000] ACPI: RSDT (v001 DELL CPi R 0x27d4091e ASL 0x00000061) @ 0x1ffef701> >> > [17179569.184000] ACPI: FADT (v001 DELL CPi R 0x27d4091e ASL 0x00000061) @ 0x1fff0400> >> > [17179569.184000] ACPI: MADT (v001 DELL CPi R 0x27d4091e ASL 0x00000047) @ 0x1fff0c00> >> > [17179569.184000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x1ffef731> >> > [17179569.184000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000> >> > [17179569.184000] ACPI: PM-Timer IO Port: 0x1008> >> > [17179569.184000] ACPI: Local APIC address 0xfee00000> >> > [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)> >> > [17179569.184000] Processor #0 15:4 APIC version 20> >> > [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)> >> > [17179569.184000] Processor #1 15:4 APIC version 20> >> > [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])> >> > [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])> >> > [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])> >> > [17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23> >> > [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)> >> > [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)> >> > [17179569.184000] ACPI: IRQ0 used by override.> >> > [17179569.184000] ACPI: IRQ2 used by override.> >> > [17179569.184000] ACPI: IRQ9 used by override.> >> > [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs> >> > [17179569.184000] Using ACPI (MADT) for SMP configuration information> >> > [17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)> >> > [17179569.184000] Built 1 zonelists> >> > [17179569.184000] Kernel command line: root=/dev/hdc3 ro quiet splash locale=it_IT> >> > [17179569.184000] mapped APIC to ffffd000 (fee00000)> >> > [17179569.184000] mapped IOAPIC to ffffc000 (fec00000)> >> > [17179569.184000] Enabling fast FPU save and restore... done.> >> > [17179569.184000] Enabling unmasked SIMD FPU exception support... done.> >> > [17179569.184000] Initializing CPU#0> >> > [17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)> >> > [17179569.184000] Detected 2791.089 MHz processor.> >> > [17179569.184000] Using pmtmr for high-res timesource> >> > [17179569.184000] Console: colour VGA+ 80x25> >> > [17179571.392000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)> >> > [17179571.392000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)> >> > [17179571.400000] Memory: 509928k/524084k available (1910k kernel code, 13564k reserved, 1070k data, 308k init, 0k highmem)> >> > [17179571.400000] Checking if this processor honours the WP bit even in supervisor mode... Ok.> >> > [17179571.480000] Calibrating delay using timer specific routine.. 5587.43 BogoMIPS (lpj=11174869)> >> > [17179571.480000] Security Framework v1.0.0 initialized> >> > [17179571.480000] SELinux: Disabled at boot.> >> > [17179571.480000] Mount-cache hash table entries: 512> >> > [17179571.480000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000> >> > [17179571.480000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000> >> > [17179571.480000] monitor/mwait feature present.> >> > [17179571.480000] using mwait in idle threads.> >> > [17179571.480000] CPU: Trace cache: 12K uops, L1 D cache: 16K> >> > [17179571.480000] CPU: L2 cache: 1024K> >> > [17179571.480000] CPU: Hyper-Threading is disabled> >> > [17179571.480000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000459d 00000000 00000000> >> > [17179571.480000] Checking 'hlt' instruction... OK.> >> > [17179571.496000] SMP alternatives: switching to UP code> >> > [17179571.496000] checking if image is initramfs... it is> >> > [17179571.952000] Freeing initrd memory: 5255k freed> >> > [17179571.952000] ACPI: Core revision 20060707> >> > [17179571.960000] ACPI: Looking for DSDT ... not found!> >> > [17179571.960000] CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01> >> > [17179571.960000] SMP alternatives: switching to SMP code> >> > [17179571.964000] Booting processor 1/1 eip 3000> >> > [17179571.972000] Initializing CPU#1> >> > [17179572.052000] Calibrating delay using timer specific routine.. 5581.94 BogoMIPS (lpj=11163889)> >> > [17179572.052000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000> >> > [17179572.052000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000> >> > [17179572.052000] monitor/mwait feature present.> >> > [17179572.052000] CPU: Trace cache: 12K uops, L1 D cache: 16K> >> > [17179572.052000] CPU: L2 cache: 1024K> >> > [17179572.052000] CPU: Hyper-Threading is disabled> >> > [17179572.052000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000459d 00000000 00000000> >> > [17179572.052000] CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01> >> > [17179572.052000] Total of 2 processors activated (11169.37 BogoMIPS).> >> > [17179572.052000] ENABLING IO-APIC IRQs> >> > [17179572.052000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1> >> > [17179572.196000] checking TSC synchronization across 2 CPUs:> >> > [17179572.200000] Brought up 2 CPUs> >> > [17179572.460000] migration_cost=0> >> > [17179572.460000] NET: Registered protocol family 16> >> > [17179572.460000] EISA bus registered> >> > [17179572.460000] ACPI: bus type pci registered> >> > [17179572.484000] PCI: PCI BIOS revision 2.10 entry at 0xfcf1e, last bus=2> >> > [17179572.484000] PCI: Using configuration type 1> >> > [17179572.484000] Setting up standard PCI resources> >> > [17179572.496000] ACPI: Interpreter enabled> >> > [17179572.496000] ACPI: Using IOAPIC for interrupt routing> >> > [17179572.496000] ACPI: PCI Root Bridge [PCI0] (0000:00)> >> > [17179572.496000] PCI: Probing PCI hardware (bus 00)> >> > [17179572.496000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0> >> > [17179572.504000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO> >> > [17179572.504000] PCI quirk: region 1080-10bf claimed by ICH4 GPIO> >> > [17179572.504000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1> >> > [17179572.504000] Boot video device is 0000:01:00.0> >> > [17179572.504000] PCI: Transparent bridge - 0000:00:1e.0> >> > [17179572.504000] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')> >> > [17179572.504000] Please report the result to linux-kernel to fix this permanently> >> > [17179572.504000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]> >> > [17179572.512000] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)> >> > [17179572.512000] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11> >> > [17179572.512000] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)> >> > [17179572.512000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)> >> > [17179572.516000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)> >> > [17179572.516000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)> >> > [17179572.516000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]> >> > [17179572.516000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]> >> > [17179572.516000] Linux Plug and Play Support v0.97 (c) Adam Belay> >> > [17179572.516000] pnp: PnP ACPI init> >> > [17179572.528000] pnp: PnP ACPI: found 11 devices> >> > [17179572.528000] PnPBIOS: Disabled by ACPI PNP> >> > [17179572.528000] PCI: Using ACPI for IRQ routing> >> > [17179572.528000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report> >> > [17179572.544000] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved> >> > [17179572.544000] pnp: 00:02: ioport range 0x800-0x80f has been reserved> >> > [17179572.544000] pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved> >> > [17179572.544000] pnp: 00:02: ioport range 0x1008-0x100f could not be reserved> >> > [17179572.544000] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved> >> > [17179572.544000] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved> >> > [17179572.544000] pnp: 00:03: ioport range 0x1010-0x105f could not be reserved> >> > [17179572.544000] pnp: 00:03: ioport range 0x1060-0x107f has been reserved> >> > [17179572.544000] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved> >> > [17179572.544000] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved> >> > [17179572.544000] pnp: 00:08: ioport range 0x900-0x97f has been reserved> >> > [17179572.544000] PCI: Bridge: 0000:00:01.0> >> > [17179572.544000] IO window: c000-cfff> >> > [17179572.544000] MEM window: fc000000-fdffffff> >> > [17179572.544000] PREFETCH window: d0000000-dfffffff> >> > [17179572.544000] PCI: Bus 3, cardbus bridge: 0000:02:04.0> >> > [17179572.544000] IO window: 0000d000-0000d0ff> >> > [17179572.544000] IO window: 0000d400-0000d4ff> >> > [17179572.544000] PREFETCH window: 30000000-31ffffff> >> > [17179572.544000] MEM window: f6000000-f7ffffff> >> > [17179572.544000] PCI: Bridge: 0000:00:1e.0> >> > [17179572.544000] IO window: d000-efff> >> > [17179572.544000] MEM window: f6000000-fbffffff> >> > [17179572.544000] PREFETCH window: 30000000-31ffffff> >> > [17179572.544000] PCI: Setting latency timer of device 0000:00:1e.0 to 64> >> > [17179572.544000] PCI: Enabling device 0000:02:04.0 (0000 -> 0003)> >> > [17179572.544000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 169> >> > [17179572.544000] NET: Registered protocol family 2> >> > [17179572.596000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)> >> > [17179572.596000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)> >> > [17179572.596000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)> >> > [17179572.596000] TCP: Hash tables configured (established 16384 bind 8192)> >> > [17179572.596000] TCP reno registered> >> > [17179572.596000] audit: initializing netlink socket (disabled)> >> > [17179572.596000] audit(1595272762.596:1): initialized> >> > [17179572.596000] VFS: Disk quotas dquot_6.5.1> >> > [17179572.596000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)> >> > [17179572.596000] Initializing Cryptographic API> >> > [17179572.596000] io scheduler noop registered> >> > [17179572.596000] io scheduler anticipatory registered> >> > [17179572.596000] io scheduler deadline registered> >> > [17179572.596000] io scheduler cfq registered (default)> >> > [17179572.596000] isapnp: Scanning for PnP cards...> >> > [17179572.948000] isapnp: No Plug & Play device found> >> > [17179572.976000] Real Time Clock Driver v1.12ac> >> > [17179572.976000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled> >> > [17179572.976000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 177> >> > [17179572.976000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled> >> > [17179572.976000] mice: PS/2 mouse device common for all mice> >> > [17179572.976000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize> >> > [17179572.976000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2> >> > [17179572.976000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx> >> > [17179572.976000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12> >> > [17179572.976000] i8042.c: Warning: Keylock active.> >> > [17179572.980000] serio: i8042 AUX port at 0x60,0x64 irq 12> >> > [17179572.980000] serio: i8042 KBD port at 0x60,0x64 irq 1> >> > [17179572.980000] EISA: Probing bus 0 at eisa.0> >> > [17179572.980000] Cannot allocate resource for EISA slot 1> >> > [17179572.980000] EISA: Detected 0 cards.> >> > [17179572.980000] TCP bic registered> >> > [17179572.980000] NET: Registered protocol family 1> >> > [17179572.980000] NET: Registered protocol family 8> >> > [17179572.980000] NET: Registered protocol family 20> >> > [17179572.980000] Starting balanced_irq> >> > [17179572.980000] Using IPI No-Shortcut mode> >> > [17179572.980000] ACPI: (supports S0 S1 S3 S4 S5)> >> > [17179572.980000] Freeing unused kernel memory: 308k freed> >> > [17179572.984000] input: AT Translated Set 2 keyboard as /class/input/input0> >> > [17179574.052000] Capability LSM initialized> >> > [17179574.088000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]> >> > [17179574.088000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]> >> > [17179574.088000] ACPI: Processor [CPU0] (supports 8 throttling states)> >> > [17179574.088000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]> >> > [17179574.088000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]> >> > [17179574.088000] ACPI: Processor [CPU1] (supports 8 throttling states)> >> > [17179574.092000] ACPI: Thermal Zone [THM] (60 C)> >> > [17179574.460000] ICH4: IDE controller at PCI slot 0000:00:1f.1> >> > [17179574.460000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)> >> > [17179574.460000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169> >> > [17179574.460000] ICH4: chipset revision 1> >> > [17179574.460000] ICH4: not 100% native mode: will probe irqs later> >> > [17179574.460000] ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio> >> > [17179574.460000] ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio> >> > [17179574.460000] Probing IDE interface ide0...> >> > [17179575.204000] hda: _NEC DVD+/-RW ND-6500A, ATAPI CD/DVD-ROM drive> >> > [17179575.896000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14> >> > [17179575.912000] Probing IDE interface ide1...> >> > [17179576.208000] hdc: TOSHIBA MK1234GAX, ATA DISK drive> >> > [17179576.884000] ide1 at 0x170-0x177,0x376 on irq 15> >> > [17179576.916000] hdc: max request size: 512KiB> >> > [17179576.916000] hdc: 234441648 sectors (120034 MB), CHS=16383/255/63, UDMA(100)> >> > [17179576.916000] hdc: cache flushes supported> >> > [17179576.916000] hdc: hdc1 hdc2 hdc3 hdc4> >> > [17179576.936000] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)> >> > [17179576.936000] Uniform CD-ROM driver Revision: 3.20> >> > [17179577.636000] usbcore: registered new driver usbfs> >> > [17179577.636000] usbcore: registered new driver hub> >> > [17179577.640000] USB Universal Host Controller Interface driver v3.0> >> > [17179577.640000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169> >> > [17179577.640000] PCI: Setting latency timer of device 0000:00:1d.0 to 64> >> > [17179577.640000] uhci_hcd 0000:00:1d.0: UHCI Host Controller> >> > [17179577.640000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1> >> > [17179577.640000] uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000bf80> >> > [17179577.640000] usb usb1: configuration #1 chosen from 1 choice> >> > [17179577.640000] hub 1-0:1.0: USB hub found> >> > [17179577.640000] hub 1-0:1.0: 2 ports detected> >> > [17179577.676000] ieee1394: Initialized config rom entry `ip1394'> >> > [17179577.748000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185> >> > [17179577.748000] PCI: Setting latency timer of device 0000:00:1d.1 to 64> >> > [17179577.748000] uhci_hcd 0000:00:1d.1: UHCI Host Controller> >> > [17179577.748000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2> >> > [17179577.748000] uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000bf40> >> > [17179577.748000] usb usb2: configuration #1 chosen from 1 choice> >> > [17179577.748000] hub 2-0:1.0: USB hub found> >> > [17179577.748000] hub 2-0:1.0: 2 ports detected> >> > [17179577.856000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193> >> > [17179577.856000] PCI: Setting latency timer of device 0000:00:1d.2 to 64> >> > [17179577.856000] uhci_hcd 0000:00:1d.2: UHCI Host Controller> >> > [17179577.856000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3> >> > [17179577.856000] uhci_hcd 0000:00:1d.2: irq 193, io base 0x0000bf20> >> > [17179577.856000] usb usb3: configuration #1 chosen from 1 choice> >> > [17179577.856000] hub 3-0:1.0: USB hub found> >> > [17179577.856000] hub 3-0:1.0: 2 ports detected> >> > [17179577.964000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201> >> > [17179577.964000] PCI: Setting latency timer of device 0000:00:1d.7 to 64> >> > [17179577.964000] ehci_hcd 0000:00:1d.7: EHCI Host Controller> >> > [17179577.964000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4> >> > [17179577.964000] ehci_hcd 0000:00:1d.7: debug port 1> >> > [17179577.964000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7> >> > [17179577.964000] ehci_hcd 0000:00:1d.7: irq 201, io mem 0xf4fffc00> >> > [17179577.968000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004> >> > [17179577.968000] usb usb4: configuration #1 chosen from 1 choice> >> > [17179577.968000] hub 4-0:1.0: USB hub found> >> > [17179577.968000] hub 4-0:1.0: 6 ports detected> >> > [17179578.076000] ACPI: PCI Interrupt 0000:02:04.1[A] -> GSI 16 (level, low) -> IRQ 169> >> > [17179578.124000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[faffd800-faffdfff] Max Packet=[2048] IR/IT contexts=[4/8]> >> > [17179578.216000] Attempting manual resume> >> > [17179578.268000] kjournald starting. Commit interval 5 seconds> >> > [17179578.268000] EXT3-fs: mounted filesystem with ordered data mode.> >> > [17179578.600000] usb 2-1: new low speed USB device using uhci_hcd and address 2> >> > [17179578.792000] usb 2-1: configuration #1 chosen from 1 choice> >> > [17179579.400000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[484fc0002ca82830]> >> > [17179589.132000] input: PC Speaker as /class/input/input1> >> > [17179589.264000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5> >> > [17179589.272000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4> >> > [17179589.568000] Linux agpgart interface v0.101 (c) Dave Jones> >> > [17179589.576000] agpgart: Detected an Intel 855GM Chipset.> >> > [17179589.588000] agpgart: AGP aperture is 128M @ 0xe0000000> >> > [17179589.964000] hw_random: RNG not detected> >> > [17179590.068000] usbcore: registered new driver hiddev> >> > [17179590.084000] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input2> >> > [17179590.084000] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1> >> > [17179590.084000] usbcore: registered new driver usbhid> >> > [17179590.084000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver> >> > [17179590.124000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 177> >> > [17179590.124000] PCI: Setting latency timer of device 0000:00:1f.5 to 64> >> > [17179590.220000] ts: Compaq touchscreen protocol output> >> > [17179590.500000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x256eb1, caps: 0x804713/0x0> >> > [17179590.544000] input: SynPS/2 Synaptics TouchPad as /class/input/input3> >> > [17179590.952000] intel8x0_measure_ac97_clock: measured 59422 usecs> >> > [17179590.952000] intel8x0: clocking to 48000> >> > [17179590.956000] b44.c:v1.00 (Apr 7, 2006)> >> > [17179590.956000] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 177> >> > [17179590.960000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:0f:1f:2a:d2:01> >> > [17179590.960000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 169> >> > [17179590.960000] Yenta: CardBus bridge found at 0000:02:04.0 [1028:0196]> >> > [17179590.960000] Yenta: Using CSCINT to route CSC interrupts to PCI> >> > [17179590.960000] Yenta: Routing CardBus interrupts to PCI> >> > [17179590.960000] Yenta TI: socket 0000:02:04.0, mfunc 0x00001002, devctl 0x64> >> > [17179591.196000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 169> >> > [17179591.196000] Socket status: 30000086> >> > [17179591.196000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06> >> > [17179591.196000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff> >> > [17179591.196000] cs: IO port probe 0xd000-0xefff: clean.> >> > [17179591.196000] pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff> >> > [17179591.196000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff> >> > [17179591.512000] cs: IO port probe 0x100-0x3af: clean.> >> > [17179591.512000] cs: IO port probe 0x3e0-0x4ff: clean.> >> > [17179591.512000] cs: IO port probe 0x820-0x8ff: clean.> >> > [17179591.512000] cs: IO port probe 0xc00-0xcf7: clean.> >> > [17179591.516000] cs: IO port probe 0xa00-0xaff: clean.> >> > [17179591.660000] lp: driver loaded but no devices found> >> > [17179591.708000] SCSI subsystem initialized> >> > [17179591.716000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)> >> > [17179591.716000] ieee1394: sbp2: Try serialize_io=0 for better performance> >> > [17179591.744000] Adding 1052248k swap on /dev/disk/by-uuid/b4556574-9b8a-487c-a21f-f7eacd06c378. Priority:-1 extents:1 across:1052248k> >> > [17179591.980000] EXT3 FS on hdc3, internal journal> >> > [17179596.512000] NTFS driver 2.1.27 [Flags: R/O MODULE].> >> > [17179596.576000] NTFS volume version 3.1.> >> > [17179598.040000] ACPI: AC Adapter [AC] (on-line)> >> > [17179598.348000] ACPI: Battery Slot [BAT0] (battery present)> >> > [17179598.364000] ACPI: Lid Switch [LID]> >> > [17179598.364000] ACPI: Power Button (CM) [PBTN]> >> > [17179598.364000] ACPI: Sleep Button (CM) [SBTN]> >> > [17179598.500000] ibm_acpi: ec object not found> >> > [17179598.548000] pcc_acpi: loading...> >> > [17179598.648000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)> >> > [17179598.924000] acpi-cpufreq: CPU0 - ACPI performance management activated.> >> > [17179598.924000] acpi-cpufreq: CPU1 - ACPI performance management activated.> >> > [17179601.988000] apm: BIOS not found.> >> > [17179605.556000] Bluetooth: Core ver 2.8> >> > [17179605.556000] NET: Registered protocol family 31> >> > [17179605.556000] Bluetooth: HCI device and connection manager initialized> >> > [17179605.556000] Bluetooth: HCI socket layer initialized> >> > [17179605.580000] Bluetooth: L2CAP ver 2.8> >> > [17179605.580000] Bluetooth: L2CAP socket layer initialized> >> > [17179605.584000] Bluetooth: RFCOMM socket layer initialized> >> > [17179605.584000] Bluetooth: RFCOMM TTY layer initialized> >> > [17179605.584000] Bluetooth: RFCOMM ver 1.7> >> > [17179618.132000] NET: Registered protocol family 10> >> > [17179618.132000] lo: Disabled Privacy Extensions> >> > [17179618.132000] IPv6 over IPv4 tunneling driver> >> >> >> >> >> >> >> >> >> >> >> > L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail> >> >> >> >> >> >> >> >> >> >> >> > L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail> >> >> >> >> >> >> >> >> >> >> >> >> >> > ___________________________________> > L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail:> > http://it.docs.yahoo.com/nowyoucan.html>>>>>>>>>> ___________________________________> L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail:> http://it.docs.yahoo.com/nowyoucan.html>
