Hello,
I need some help to configure dialup modem on my PC with Ubuntu 6.10, in attachement the result of scanModem.
My machine is a DELL INSPIRON 5160 (Oct. 2004).
In this moment I'm not able to connect my machine to Internet and to understanstand how to do to reach this goal.
Tanks in advance for Help.
Silvano.
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Ubuntu 6.10 kernel 2.6.17-10-generic
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686, Ubuntu 6.10
Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
scanModem update of: 2007_Feb_10
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24c6 14e4:4d64 Modem: Intel Corporation 82801DB/DBL/DBM
Modem interrupt assignment and sharing:
177: 585 0 IO-APIC-level Intel 82801DB-ICH4
--- Bootup diagnositcs for card in PCI slot 00:1f.6 ----
[17179572.976000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 177
[17179572.976000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
ALSAversion 1.0.11
CPU0 CPU1
0: 109833 0 IO-APIC-edge timer
1: 817 0 IO-APIC-edge i8042
8: 3 0 IO-APIC-edge rtc
9: 1 0 IO-APIC-level acpi
12: 7040 0 IO-APIC-edge i8042
14: 3686 0 IO-APIC-edge ide0
15: 19856 0 IO-APIC-edge ide1
169: 4 0 IO-APIC-level uhci_hcd:usb1, ohci1394, yenta
177: 585 0 IO-APIC-level Intel 82801DB-ICH4
185: 4472 0 IO-APIC-level uhci_hcd:usb2
193: 0 0 IO-APIC-level uhci_hcd:usb3
201: 2 0 IO-APIC-level ehci_hcd:usb4
NMI: 0 0
LOC: 109658 109669
ERR: 0
MIS: 0
[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[17179569.184000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001ffcd000 (usable)
[17179569.184000] BIOS-e820: 000000001ffcd000 - 0000000020000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec20000 (reserved)
[17179569.184000] BIOS-e820: 00000000feda0000 - 00000000fee10000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 131021
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 126925 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 DELL ) @ 0x000fdea0
[17179569.184000] ACPI: RSDT (v001 DELL CPi R 0x27d4091e ASL 0x00000061) @ 0x1ffef701
[17179569.184000] ACPI: FADT (v001 DELL CPi R 0x27d4091e ASL 0x00000061) @ 0x1fff0400
[17179569.184000] ACPI: MADT (v001 DELL CPi R 0x27d4091e ASL 0x00000047) @ 0x1fff0c00
[17179569.184000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x1ffef731
[17179569.184000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdc3 ro quiet splash locale=it_IT
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 2791.089 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.392000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.392000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.400000] Memory: 509928k/524084k available (1910k kernel code, 13564k reserved, 1070k data, 308k init, 0k highmem)
[17179571.400000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179571.480000] Calibrating delay using timer specific routine.. 5587.43 BogoMIPS (lpj=11174869)
[17179571.480000] Security Framework v1.0.0 initialized
[17179571.480000] SELinux: Disabled at boot.
[17179571.480000] Mount-cache hash table entries: 512
[17179571.480000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
[17179571.480000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
[17179571.480000] monitor/mwait feature present.
[17179571.480000] using mwait in idle threads.
[17179571.480000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179571.480000] CPU: L2 cache: 1024K
[17179571.480000] CPU: Hyper-Threading is disabled
[17179571.480000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000459d 00000000 00000000
[17179571.480000] Checking 'hlt' instruction... OK.
[17179571.496000] SMP alternatives: switching to UP code
[17179571.496000] checking if image is initramfs... it is
[17179571.952000] Freeing initrd memory: 5255k freed
[17179571.952000] ACPI: Core revision 20060707
[17179571.960000] ACPI: Looking for DSDT ... not found!
[17179571.960000] CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
[17179571.960000] SMP alternatives: switching to SMP code
[17179571.964000] Booting processor 1/1 eip 3000
[17179571.972000] Initializing CPU#1
[17179572.052000] Calibrating delay using timer specific routine.. 5581.94 BogoMIPS (lpj=11163889)
[17179572.052000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
[17179572.052000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
[17179572.052000] monitor/mwait feature present.
[17179572.052000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179572.052000] CPU: L2 cache: 1024K
[17179572.052000] CPU: Hyper-Threading is disabled
[17179572.052000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000459d 00000000 00000000
[17179572.052000] CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
[17179572.052000] Total of 2 processors activated (11169.37 BogoMIPS).
[17179572.052000] ENABLING IO-APIC IRQs
[17179572.052000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179572.196000] checking TSC synchronization across 2 CPUs:
[17179572.200000] Brought up 2 CPUs
[17179572.460000] migration_cost=0
[17179572.460000] NET: Registered protocol family 16
[17179572.460000] EISA bus registered
[17179572.460000] ACPI: bus type pci registered
[17179572.484000] PCI: PCI BIOS revision 2.10 entry at 0xfcf1e, last bus=2
[17179572.484000] PCI: Using configuration type 1
[17179572.484000] Setting up standard PCI resources
[17179572.496000] ACPI: Interpreter enabled
[17179572.496000] ACPI: Using IOAPIC for interrupt routing
[17179572.496000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.496000] PCI: Probing PCI hardware (bus 00)
[17179572.496000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179572.504000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[17179572.504000] PCI quirk: region 1080-10bf claimed by ICH4 GPIO
[17179572.504000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179572.504000] Boot video device is 0000:01:00.0
[17179572.504000] PCI: Transparent bridge - 0000:00:1e.0
[17179572.504000] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[17179572.504000] Please report the result to linux-kernel to fix this permanently
[17179572.504000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.512000] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[17179572.512000] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
[17179572.512000] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[17179572.512000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[17179572.516000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179572.516000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179572.516000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[17179572.516000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[17179572.516000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.516000] pnp: PnP ACPI init
[17179572.528000] pnp: PnP ACPI: found 11 devices
[17179572.528000] PnPBIOS: Disabled by ACPI PNP
[17179572.528000] PCI: Using ACPI for IRQ routing
[17179572.528000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179572.544000] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[17179572.544000] pnp: 00:02: ioport range 0x800-0x80f has been reserved
[17179572.544000] pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
[17179572.544000] pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
[17179572.544000] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
[17179572.544000] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
[17179572.544000] pnp: 00:03: ioport range 0x1010-0x105f could not be reserved
[17179572.544000] pnp: 00:03: ioport range 0x1060-0x107f has been reserved
[17179572.544000] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
[17179572.544000] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
[17179572.544000] pnp: 00:08: ioport range 0x900-0x97f has been reserved
[17179572.544000] PCI: Bridge: 0000:00:01.0
[17179572.544000] IO window: c000-cfff
[17179572.544000] MEM window: fc000000-fdffffff
[17179572.544000] PREFETCH window: d0000000-dfffffff
[17179572.544000] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[17179572.544000] IO window: 0000d000-0000d0ff
[17179572.544000] IO window: 0000d400-0000d4ff
[17179572.544000] PREFETCH window: 30000000-31ffffff
[17179572.544000] MEM window: f6000000-f7ffffff
[17179572.544000] PCI: Bridge: 0000:00:1e.0
[17179572.544000] IO window: d000-efff
[17179572.544000] MEM window: f6000000-fbffffff
[17179572.544000] PREFETCH window: 30000000-31ffffff
[17179572.544000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179572.544000] PCI: Enabling device 0000:02:04.0 (0000 -> 0003)
[17179572.544000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179572.544000] NET: Registered protocol family 2
[17179572.596000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179572.596000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179572.596000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179572.596000] TCP: Hash tables configured (established 16384 bind 8192)
[17179572.596000] TCP reno registered
[17179572.596000] audit: initializing netlink socket (disabled)
[17179572.596000] audit(1595272762.596:1): initialized
[17179572.596000] VFS: Disk quotas dquot_6.5.1
[17179572.596000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179572.596000] Initializing Cryptographic API
[17179572.596000] io scheduler noop registered
[17179572.596000] io scheduler anticipatory registered
[17179572.596000] io scheduler deadline registered
[17179572.596000] io scheduler cfq registered (default)
[17179572.596000] isapnp: Scanning for PnP cards...
[17179572.948000] isapnp: No Plug & Play device found
[17179572.976000] Real Time Clock Driver v1.12ac
[17179572.976000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179572.976000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 177
[17179572.976000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[17179572.976000] mice: PS/2 mouse device common for all mice
[17179572.976000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179572.976000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179572.976000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179572.976000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179572.976000] i8042.c: Warning: Keylock active.
[17179572.980000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179572.980000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179572.980000] EISA: Probing bus 0 at eisa.0
[17179572.980000] Cannot allocate resource for EISA slot 1
[17179572.980000] EISA: Detected 0 cards.
[17179572.980000] TCP bic registered
[17179572.980000] NET: Registered protocol family 1
[17179572.980000] NET: Registered protocol family 8
[17179572.980000] NET: Registered protocol family 20
[17179572.980000] Starting balanced_irq
[17179572.980000] Using IPI No-Shortcut mode
[17179572.980000] ACPI: (supports S0 S1 S3 S4 S5)
[17179572.980000] Freeing unused kernel memory: 308k freed
[17179572.984000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.052000] Capability LSM initialized
[17179574.088000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[17179574.088000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[17179574.088000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179574.088000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[17179574.088000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
[17179574.088000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179574.092000] ACPI: Thermal Zone [THM] (60 C)
[17179574.460000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[17179574.460000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[17179574.460000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
[17179574.460000] ICH4: chipset revision 1
[17179574.460000] ICH4: not 100% native mode: will probe irqs later
[17179574.460000] ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
[17179574.460000] ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
[17179574.460000] Probing IDE interface ide0...
[17179575.204000] hda: _NEC DVD+/-RW ND-6500A, ATAPI CD/DVD-ROM drive
[17179575.896000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.912000] Probing IDE interface ide1...
[17179576.208000] hdc: TOSHIBA MK1234GAX, ATA DISK drive
[17179576.884000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.916000] hdc: max request size: 512KiB
[17179576.916000] hdc: 234441648 sectors (120034 MB), CHS=16383/255/63, UDMA(100)
[17179576.916000] hdc: cache flushes supported
[17179576.916000] hdc: hdc1 hdc2 hdc3 hdc4
[17179576.936000] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179576.936000] Uniform CD-ROM driver Revision: 3.20
[17179577.636000] usbcore: registered new driver usbfs
[17179577.636000] usbcore: registered new driver hub
[17179577.640000] USB Universal Host Controller Interface driver v3.0
[17179577.640000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179577.640000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179577.640000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179577.640000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179577.640000] uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000bf80
[17179577.640000] usb usb1: configuration #1 chosen from 1 choice
[17179577.640000] hub 1-0:1.0: USB hub found
[17179577.640000] hub 1-0:1.0: 2 ports detected
[17179577.676000] ieee1394: Initialized config rom entry `ip1394'
[17179577.748000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
[17179577.748000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179577.748000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179577.748000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179577.748000] uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000bf40
[17179577.748000] usb usb2: configuration #1 chosen from 1 choice
[17179577.748000] hub 2-0:1.0: USB hub found
[17179577.748000] hub 2-0:1.0: 2 ports detected
[17179577.856000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
[17179577.856000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179577.856000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179577.856000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179577.856000] uhci_hcd 0000:00:1d.2: irq 193, io base 0x0000bf20
[17179577.856000] usb usb3: configuration #1 chosen from 1 choice
[17179577.856000] hub 3-0:1.0: USB hub found
[17179577.856000] hub 3-0:1.0: 2 ports detected
[17179577.964000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201
[17179577.964000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179577.964000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179577.964000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[17179577.964000] ehci_hcd 0000:00:1d.7: debug port 1
[17179577.964000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[17179577.964000] ehci_hcd 0000:00:1d.7: irq 201, io mem 0xf4fffc00
[17179577.968000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.968000] usb usb4: configuration #1 chosen from 1 choice
[17179577.968000] hub 4-0:1.0: USB hub found
[17179577.968000] hub 4-0:1.0: 6 ports detected
[17179578.076000] ACPI: PCI Interrupt 0000:02:04.1[A] -> GSI 16 (level, low) -> IRQ 169
[17179578.124000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[faffd800-faffdfff] Max Packet=[2048] IR/IT contexts=[4/8]
[17179578.216000] Attempting manual resume
[17179578.268000] kjournald starting. Commit interval 5 seconds
[17179578.268000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.600000] usb 2-1: new low speed USB device using uhci_hcd and address 2
[17179578.792000] usb 2-1: configuration #1 chosen from 1 choice
[17179579.400000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[484fc0002ca82830]
[17179589.132000] input: PC Speaker as /class/input/input1
[17179589.264000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179589.272000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179589.568000] Linux agpgart interface v0.101 (c) Dave Jones
[17179589.576000] agpgart: Detected an Intel 855GM Chipset.
[17179589.588000] agpgart: AGP aperture is 128M @ 0xe0000000
[17179589.964000] hw_random: RNG not detected
[17179590.068000] usbcore: registered new driver hiddev
[17179590.084000] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input2
[17179590.084000] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1
[17179590.084000] usbcore: registered new driver usbhid
[17179590.084000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179590.124000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 177
[17179590.124000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[17179590.220000] ts: Compaq touchscreen protocol output
[17179590.500000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x256eb1, caps: 0x804713/0x0
[17179590.544000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[17179590.952000] intel8x0_measure_ac97_clock: measured 59422 usecs
[17179590.952000] intel8x0: clocking to 48000
[17179590.956000] b44.c:v1.00 (Apr 7, 2006)
[17179590.956000] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179590.960000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:0f:1f:2a:d2:01
[17179590.960000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179590.960000] Yenta: CardBus bridge found at 0000:02:04.0 [1028:0196]
[17179590.960000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179590.960000] Yenta: Routing CardBus interrupts to PCI
[17179590.960000] Yenta TI: socket 0000:02:04.0, mfunc 0x00001002, devctl 0x64
[17179591.196000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 169
[17179591.196000] Socket status: 30000086
[17179591.196000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[17179591.196000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
[17179591.196000] cs: IO port probe 0xd000-0xefff: clean.
[17179591.196000] pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff
[17179591.196000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
[17179591.512000] cs: IO port probe 0x100-0x3af: clean.
[17179591.512000] cs: IO port probe 0x3e0-0x4ff: clean.
[17179591.512000] cs: IO port probe 0x820-0x8ff: clean.
[17179591.512000] cs: IO port probe 0xc00-0xcf7: clean.
[17179591.516000] cs: IO port probe 0xa00-0xaff: clean.
[17179591.660000] lp: driver loaded but no devices found
[17179591.708000] SCSI subsystem initialized
[17179591.716000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179591.716000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179591.744000] Adding 1052248k swap on /dev/disk/by-uuid/b4556574-9b8a-487c-a21f-f7eacd06c378. Priority:-1 extents:1 across:1052248k
[17179591.980000] EXT3 FS on hdc3, internal journal
[17179596.512000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179596.576000] NTFS volume version 3.1.
[17179598.040000] ACPI: AC Adapter [AC] (on-line)
[17179598.348000] ACPI: Battery Slot [BAT0] (battery present)
[17179598.364000] ACPI: Lid Switch [LID]
[17179598.364000] ACPI: Power Button (CM) [PBTN]
[17179598.364000] ACPI: Sleep Button (CM) [SBTN]
[17179598.500000] ibm_acpi: ec object not found
[17179598.548000] pcc_acpi: loading...
[17179598.648000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[17179598.924000] acpi-cpufreq: CPU0 - ACPI performance management activated.
[17179598.924000] acpi-cpufreq: CPU1 - ACPI performance management activated.
[17179601.988000] apm: BIOS not found.
[17179605.556000] Bluetooth: Core ver 2.8
[17179605.556000] NET: Registered protocol family 31
[17179605.556000] Bluetooth: HCI device and connection manager initialized
[17179605.556000] Bluetooth: HCI socket layer initialized
[17179605.580000] Bluetooth: L2CAP ver 2.8
[17179605.580000] Bluetooth: L2CAP socket layer initialized
[17179605.584000] Bluetooth: RFCOMM socket layer initialized
[17179605.584000] Bluetooth: RFCOMM TTY layer initialized
[17179605.584000] Bluetooth: RFCOMM ver 1.7
[17179618.132000] NET: Registered protocol family 10
[17179618.132000] lo: Disabled Privacy Extensions
[17179618.132000] IPv6 over IPv4 tunneling driver
L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail
L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail
___________________________________
L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail:
http://it.docs.yahoo.com/nowyoucan.html
