Sasha,
Is there any possibility of getting a compile of drivers/amrlibs.o
with gcc-4.1 as contrasted to the currrent gcc-4.0 ??
RJ
The results are mostly good. Some explanation:
amrlibs.o[17199543.068000] slamr: version magic
'2.6.17-10-generic SMP mod_unload 586 REGPARM gcc-4.0'
should be '2.6.17-10-generic SMP mod_unload 586
REGPARM gcc-4.1'
-------
relates that the drivers/amrlibs.o pre-compiled at the former
Smartlink. Inc, and further linked into driver slamr.ko, was compiled
with gcc-4.0 rather that the gcc-4.1 use for your 2.6.17-10-generic
[17199578.312000] slamr: module license 'Smart Link Ltd.' taints kernel.
is a harmless complaint that the slamr driver has a closed source component, the
amrlibs.o, which prevents further use of debugging tools
[17199578.312000] slamr: SmartLink AMRMO modem.
[17199578.312000] slamr: probe 163c:3052 SL1900
card...
[17199578.552000] slamr: slamr0 is SL1900 card.
--------------------
Just the diagnostic run by slamr on the modem hardware
ports should be created by:
slmodemd -c USA /dev/slamr0
SmartLink Soft Modem: version 2.9.9e-pre1 May 28 2006
17:44:44
symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
modem `slamr0' created. TTY is `/dev/pts/1'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
------
THis is a success, and should now occur automatically on bootup.
The modem should now be found by
$ sudo wvdialconf /etc/wvdial.conf
Following the example in wvdial.txt, edit in your personal info with:
$ sudo gedit /etc/wvdial.conf
removing the < > symbols and adding a line:
Carrier Check = no
Then you should be able to dialout with:
$ sudo wvdial
MarvS
On 2/4/07, r jefferey <rjefferey@xxxxxxxxx> wrote:
MarvS,
I performed the steps, how's it look?
rob@rob-desktop:~$ cd misc
rob@rob-desktop:~/misc$ ls
Modem NDS~ scanModem slamr_2.6.17_10_generic.tar.gz
rob@rob-desktop:~/misc$ tar zxf slamr*.tar.gz
rob@rob-desktop:~/misc$ ls
Modem NDS~ scanModem slamr-2.6.17-10-generic
slamr_2.6.17_10_generic.tar.gz
rob@rob-desktop:~/misc$ cd slamr-2.6.17-10-generic
rob@rob-desktop:~/misc/slamr-2.6.17-10-generic$ ls
1st_Read.txt
sl-modem-daemon_2.9.10+2.9.9d+e-pre2-5build1_i386.deb
CountryList.txt slusb.ko
setup ungrab-winmodem.ko
slamr.ko unloading
slmodemd wvdial.txt
rob@rob-desktop:~/misc/slamr-2.6.17-10-generic$ sudo
./setup
Password:
When asked about your country, Enter:
USA
Installing the Debian packages supporting autoloading
(Reading database ... 88447 files and directories
currently installed.)
Preparing to replace sl-modem-daemon
2.9.10+2.9.9d+e-pre2-5build1 (using
sl-modem-daemon_2.9.10+2.9.9d+e-pre2-5build1_i386.deb)
...
Shutting down SmartLink Modem driver normally ... no
slmodemd daemon running.
Unloading modem driver from kernel ... none found.
Unpacking replacement sl-modem-daemon ...
Setting up sl-modem-daemon
(2.9.10+2.9.9d+e-pre2-5build1) ...
FATAL: Error inserting ungrab_winmodem
(/lib/modules/2.6.17-10-generic/extra/ungrab-winmodem.ko):
Invalid module format
FATAL: Error inserting slamr
(/lib/modules/2.6.17-10-generic/extra/slamr.ko):
Invalid module format
FATAL: Error inserting ungrab_winmodem
(/lib/modules/2.6.17-10-generic/extra/ungrab-winmodem.ko):
Invalid module format
FATAL: Error inserting slamr
(/lib/modules/2.6.17-10-generic/extra/slamr.ko):
Invalid module format
Starting SmartLink Modem driver for: slamr0.
Creating /dev/modem symlink, pointing to: /dev/ttySL0.
Copying over newer files
cp: cannot stat `sl-modem-daemon.modutils': No such
file or directory
Making folder /lib/modules/2.6.17-10-generic/extra
Copying drivers to
/lib/modules/2.6.17-10-generic/extra
Checking driver install
slamr.ko slusb.ko ungrab-winmodem.ko
Finished installs.
Informing the System
Starting function tests, loading drivers:
Running diagnostic:
[17179595.732000] slamr: version magic
'2.6.17-10-generic SMP mod_unload 586 REGPARM gcc-4.0'
should be '2.6.17-10-generic SMP mod_unload 586
REGPARM gcc-4.1'
[17179603.676000] slamr: version magic
'2.6.17-10-generic SMP mod_unload 586 REGPARM gcc-4.0'
should be '2.6.17-10-generic SMP mod_unload 586
REGPARM gcc-4.1'
[17179603.688000] slamr: version magic
'2.6.17-10-generic SMP mod_unload 586 REGPARM gcc-4.0'
should be '2.6.17-10-generic SMP mod_unload 586
REGPARM gcc-4.1'
[17179603.900000] slamr: version magic
'2.6.17-10-generic SMP mod_unload 586 REGPARM gcc-4.0'
should be '2.6.17-10-generic SMP mod_unload 586
REGPARM gcc-4.1'
[17199542.836000] slamr: version magic
'2.6.17-10-generic SMP mod_unload 586 REGPARM gcc-4.0'
should be '2.6.17-10-generic SMP mod_unload 586
REGPARM gcc-4.1'
[17199542.848000] slamr: version magic
'2.6.17-10-generic SMP mod_unload 586 REGPARM gcc-4.0'
should be '2.6.17-10-generic SMP mod_unload 586
REGPARM gcc-4.1'
[17199543.068000] slamr: version magic
'2.6.17-10-generic SMP mod_unload 586 REGPARM gcc-4.0'
should be '2.6.17-10-generic SMP mod_unload 586
REGPARM gcc-4.1'
[17199578.312000] slamr: module license 'Smart Link
Ltd.' taints kernel.
[17199578.312000] slamr: SmartLink AMRMO modem.
[17199578.312000] slamr: probe 163c:3052 SL1900
card...
[17199578.552000] slamr: slamr0 is SL1900 card.
ports should be created by:
slmodemd -c USA /dev/slamr0
SmartLink Soft Modem: version 2.9.9e-pre1 May 28 2006
17:44:44
symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
modem `slamr0' created. TTY is `/dev/pts/1'
Use `/dev/ttySL0' as modem device, Ctrl+C for
termination.
____________________________________________________________________________________
Need Mail bonding?
Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
http://answers.yahoo.com/dir/?link=list&sid=396546091
