Don,
--> Sending: (password)> --> Don't know what to do! Starting pppd and hoping> for the best.> --> Starting pppd at Sat Jan 27 10:13:44 2007> --> Pid of pppd: 12752> --> Using interface ppp0> --> pppd: �I��([0c][06][08]P> --> [06][08]
There is a login protocol problem, rather than a driver problem.Looking at the end of /var/log/messages following a failed attempt maybe information. The error code numbers that may therein be mentioned, refer to thoseexplained towards the end of$ man pppd Some IPs require a LoginName format like VR\LoginNamewhere VR is for example VERIZON.net Look at the Postintall HowTo at http://linmodems.technion.ac.ilJacques may have suggestions, he is more knowledgeable on protocol issues. Also make a Port/Modem log of a dialout under Microsoft, to see howthat negotiation is managed. MarvS On 1/27/07, Dominic Mayers <dominic_mayers@xxxxxxxxx> wrote:> Hi Marvin,>> I setup the wvdial.conf file as you suggested. Here is> the result:>> dominic@dominic-laptop:~$ sudo wvdial> --> WvDial: Internet dialer version 1.56> --> Cannot get information for serial port.> --> Initializing modem.> --> Sending: ATZ> ATZ> OK> --> Sending: ATQ0 V1 E1 &C1 &D2 +FCLASS=0> ATQ0 V1 E1 &C1 &D2 +FCLASS=0> OK> --> Modem initialized.> --> Idle Seconds = 300, disabling automatic reconnect.> --> Sending: ATDT5148666820> --> Waiting for carrier.> ATDT5148666820> CONNECT 50667> --> Carrier detected. Waiting for prompt.> DO NOT BUSY OUT ANY MODEMS UNLESS YOU FULLY UNDERSTAND> WHY YOU ARE DOING IT!> User Access Verification> login:> --> Looks like a login prompt.> --> Sending: dominic.mayers@xxxxxxxxx> dominic.mayers@xxxxxxxxx> Password:> --> Looks like a password prompt.> --> Sending: (password)> --> Don't know what to do! Starting pppd and hoping> for the best.> --> Starting pppd at Sat Jan 27 10:13:44 2007> --> Pid of pppd: 12752> --> Using interface ppp0> --> pppd: �I��([0c][06][08]P> --> [06][08]> --> pppd: �I��([0c][06][08]P> --> [06][08]> --> pppd: �I��([0c][06][08]P> --> [06][08]> --> pppd: �I��([0c][06][08]P> --> [06][08]> --> pppd: �I��([0c][06][08]P> --> [06][08]> --> Disconnecting at Sat Jan 27 10:14:15 2007> --> The PPP daemon has died: A modem hung up the phone> (exit code = 16)> --> man pppd explains pppd error codes in more detail.> --> Try again and look into /var/log/messages and the> wvdial and pppd man pages for more information.>> --- Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>> wrote:>> > Don> >> > try> >> > [Dialer Defaults]> > Baud = 115200> > Modem = /dev/ttySL0> > Init1 = ATZ> > # Init2 = ATI> > # Init3 = ATI3> > Init2 = ATQ0 V1 E1 &C1 &D2 +FCLASS=0> > #> > # Ask Password = 1> > # Dial Command = ATX3DT> > Stupid Mode = 0> > Compuserve = 0> > Force Address => > Idle Seconds = 300> > DialMessage1 => > DialMessage2 => > ISDN = 0> > Auto DNS = 1> > Carrier Check = no> > #> > Phone = 5148666820> > Username = dominic.mayers@xxxxxxxxx> > Password = YourPassword> > #New PPPD = yes> >> > On 1/27/07, Dominic Mayers> > <dominic_mayers@xxxxxxxxx> wrote:> > > Here it is! Dominic> > >> > > --- Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>> > > wrote:> > >> > > > Send me your /etc/wvdial.conf file> > > >> > > > Marv> > > >> > > > On 1/26/07, Dominic Mayers> > > > <dominic_mayers@xxxxxxxxx> wrote:> > > > > I was not sure that you got the files in the> > > > previous> > > > > email. So I included them here.> > > > >> > > > >> > > > > --- Dominic Mayers <dominic_mayers@xxxxxxxxx>> > > > wrote:> > > > >> > > > > > Hi!> > > > > >> > > > > > I went to the directory that contains the> > > > hsfmodem> > > > > > makefile and executed:> > > > > >> > > > > > $ make uninstall> > > > > >> > > > > > I also executed> > > > > >> > > > > > $ hsfconfig -r> > > > > >> > > > > > Then I executed> > > > > >> > > > > > $ sudo killall slmodemd> > > > > > $ sudo modprobe snd-intel8x0m> > > > > > $ sudo slmodemd -c CANADA --alsa modem:1> > > > > >> > > > > > and got the message:> > > > > >> > > > > > SmartLink Soft Modem: version 2.9.9e-pre1> > May 28> > > > > > 2006> > > > > > 17:44:44> > > > > > symbolic link `/dev/ttySL0' -> `/dev/pts/0'> > > > created.> > > > > > modem `modem:1' created. TTY is `/dev/pts/0'> > > > > > Use `/dev/ttySL0' as modem device, Ctrl+C> > for> > > > > > termination.> > > > > >> > > > > > The modem is working, but not very well as> > you> > > > can> > > > > > see. While slmodemd was still running, I> > > > executed:> > > > > >> > > > > > dominic@dominic-laptop:~$ sudo wvdial> > > > > > Password:> > > > > > --> WvDial: Internet dialer version 1.56> > > > > > --> Cannot get information for serial port.> > > > > > --> Initializing modem.> > > > > > --> Sending: ATZ> > > > > > ATZ> > > > > > OK> > > > > > --> Sending: ATI> > > > > > ATI> > > > > > SmartLink Soft Modem> > > > > > OK> > > > > > --> Sending: ATI3> > > > > > ATI3> > > > > > modem:1> > > > > > alsa modem driver> > > > > > OK> > > > > > --> Sending: ATQ0 V1 E1 &C1 &D2 +FCLASS=0> > > > > > ATQ0 V1 E1 &C1 &D2 +FCLASS=0> > > > > > OK> > > > > > --> Modem initialized.> > > > > > --> Idle Seconds = 300, disabling automatic> > > > > > reconnect.> > > > > > --> Please enter password (or empty password> > to> > > > > > stop):> > > > > > --> Sending: ATX3DT5148666820> > > > > > --> Waiting for carrier.> > > > > > ATX3DT5148666820> > > > > > CONNECT 52000> > > > > > --> Carrier detected. Waiting for prompt.> > > > > > DO NOT BUSY OUT ANY MODEMS UNLESS YOU FULLY> > > > > > UNDERSTAND> > > > > > WHY YOU ARE DOING IT!> > > > > > User Access Verification> > > > > > login:> > > > > > --> Looks like a login prompt.> > > > > > --> Sending: dominic.mayers@xxxxxxxxx> > > > > > --> Don't know what to do! Starting pppd> > and> > > > hoping> > > > > > for the best.> > > > > > --> Starting pppd at Fri Jan 26 19:03:23> > 2007> > > > > > --> Pid of pppd: 5774> > > > > > --> Using interface ppp0> > > > > > --> pppd: �[0c][06][08]P [06][08]> > > > > > --> pppd: �[0c][06][08]P [06][08]> > > > > > --> pppd: �[0c][06][08]P [06][08]> > > > > > --> pppd: �[0c][06][08]P [06][08]> > > > > > --> pppd: �[0c][06][08]P [06][08]> > > > > > --> Disconnecting at Fri Jan 26 19:03:53> > 2007> > > > > > --> The PPP daemon has died: A modem hung up> > the> > > > > > phone> > > > > > (exit code = 16)> > > > > > --> man pppd explains pppd error codes in> > more> > > > > > detail.> > > > > > --> Try again and look into> > /var/log/messages> > > > and> > > > > > the> > > > > > wvdial and pppd man pages for more> > information.> > > > > >> > > > > >> > > > > > --- Marvin Stodolsky> > > > <marvin.stodolsky@xxxxxxxxx>> > > > > > wrote:> > > > > >> > > > > > > Don,> > > > > > >> > > > > > > There clearly are residual HSF modem files> > > > left.> > > > > > > Search them out,> > > > > > > Delete them and reboot and then repeat the> > > > last> > > > > > > drill. Get the> > > > > > > removal syntax from www.linuxant.com.> > > > > > >> > > > > > >> > > > > > > Use> > > > > > > $ find /lib/modules -name hsf*> > > > > > > to find the drivers.> > > > > > >> > > > > > > MarvS> > > > > > >> > > > > > > On 1/26/07, Dominic Mayers> > > > > > > <dominic_mayers@xxxxxxxxx> wrote:> > > > > > > > Hi MarvS> > > > > > > >> > > > > > > > I did as you suggested and attached the> > > > files.> > > > > > > Hope it> > > > > > > > is enough to figure out the problem.> > > > > > > >> > > > > > > > Dominic> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > > --- Marvin Stodolsky> > > > > > <marvin.stodolsky@xxxxxxxxx>> > > > > > > > wrote:> > > > > > > >> > > > > > > > > Please rerun scanModem and send the> > new> > > > > > > > > ModemData.txt> > > > > > > > > Also the dmesg.txt from> > > > > > > > > $ dmesg > dmesg.txt> > > > > > > > >> > > > > > > > > MarvS> > > > > > > > >> > > > > > > > > On 1/26/07, Dominic Mayers> > > > > > > > > <dominic_mayers@xxxxxxxxx> wrote:> > > > > > > > > > Thanks,> > > > > > > > > >> > > > > > > > > > I "fully uninstalled" the hsfmodem> > > > package> > > > > > > using> > > > > > > > > > synaptic. Is that enough? I> > rebooted> > > > and> > > > > > > tried> > > > > > > > > again> > > > > > > > > > with no success:> > > > > > > > > >> > > > > > > > > > dominic@dominic-laptop:~$ sudo> > slmodemd> > > > -c> > > > > > > CANADA> > > > > > > > > > --alsa modem:1> > > > > > > > > > error: mixer setup: attach hw:1> > error:> > > > No> > > > > > such> > > > > > > > > device> > > > > > > > > > ALSA lib> > pcm.c:2017:(snd_pcm_open_conf)> > > > > > > Invalid> > > > > > > > > type> > > > > > > > > > for PCM modem:1 definition (id:> > modem,> > > > > > value:> > > > > > > > > > cards.pcm.modem)> > > > > > > > > > error: alsa setup: cannot open> > playback> > > > > > device> > > > > > > > > > 'modem:1': Invalid argument> > > > > > > > > > error: cannot setup device `modem:1'> > > > > > > > > >> > > > > > > > > > Dominic> > > > > > > > > >> > > > > > > > > >> > > > > > > > > > --- Marvin Stodolsky> > > > > > > <marvin.stodolsky@xxxxxxxxx>> > > > > > > > > > wrote:> > > > > > > > > >> > > > > > > > > > > Don,> > > > > > > > > > >> > > > > > > > > > > Fully uninstall the hsfmodem> > package.> > > > It> > > > > > can> > > > > > > > > > > interfere slmodemd support.> > > > > > > > > > > Then reboot and retest> > > > > > > > > > > $ sudo slmodemd -c CANADA> > --alsa> > > > > > modem:1> > > > > > > > > > >> > > > > > > > > > > MarvS> > > > > > > > > > > scanModem maintainer> > > > > > > > > > >> > > > > > > > > > > On 1/24/07, Dominic Mayers> > > > > > > > > > > <dominic_mayers@xxxxxxxxx> wrote:> > > > > > > > > > > > Hi!> > > > > > > > > > > >> > > > > > > > > > > > I would appreciate an advice. I> > > > followed> > > > > > > the> > > > > > > > > > > > instruction in ModemData.txt.> > Here> > > > is> > > > > > what> > > > > > > I> > > > > > > > > got> > > > > > > > > > > > at the terminal:> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > >> > > > > >> > dominic@dominic-laptop:~/Desktop/SLMODEMD.gcc4$> > > > > > > > > > > sudo> > > > > > > > > > > > modprobe snd-intel8x0m> > > > > > > > > > > >> > > > > > > > >> > > > > >> > dominic@dominic-laptop:~/Desktop/SLMODEMD.gcc4$> > > > > > > > > > > sudo> > > > > > > > > > > > slmodemd -c CANADA --alsa> > modem:1> > > > > > > > > > > > error: mixer setup: attach hw:1> > > > error:> > > > > > No> > > > > > > such> > > > > > > > > > > device> > > > > > > > > > > > ALSA lib> > > > pcm.c:2017:(snd_pcm_open_conf)> > > > > > > > > Invalid> > > > > > > > > > > type> > > > > > > > > > > > for PCM modem:1 definition (id:> > > > modem,> > > > > > > value:> > > > > > > > > > > > cards.pcm.modem)> > > > > > > > > > > > error: alsa setup: cannot open> > > > playback> > > > > > > device> > > > > > > > > > > > 'modem:1': Invalid argument> > > > > > > > > > > > error: cannot setup device> > `modem:1'> > > > > > > > > > > >> > > > > > > > >> > > > > >> > dominic@dominic-laptop:~/Desktop/SLMODEMD.gcc4$> > > > > > > > > > > >> > > > > > > > > > > > Thank you,> > > > > > > > > > > >> > > > > > > > > > > > Dominic> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> >> ____________________________________________________________________________________> > > > > > > > > > > > Don't pick lemons.> > > > > > > > > > > > See all the new 2007 cars at> > Yahoo!> > > > > > Autos.> > > > > > > > > > > >> > http://autos.yahoo.com/new_cars.html> > > > > > > > > > > >> > > > > > > > > > > > Only plain text email is> > forwarded> > > > by> > > > > > the> > > > > > > > > > > DISCUSS@xxxxxxxxxxxxx List Server.> > > > > > > > > > > > Do use the following as the> > email> > > > > > Subject> > > > > > > > > Line:> > > > > > > > > > > > SomeName, YourCountry> > > > Ubuntu> > > > > > > 6.10> > > > > > > > > > > kernel 2.6.17-10-generic> > > > > > > > > > > > This will alert cogent experts,> > and> > > > > > > > > distinguish> > > > > > > > > > > cases in the Archives.> > > > > > > > > > > > YourCountry will enable Country> > > > Code> > > > > > > > > guidance.> > > > > > > > > > > > Occassionally responses are> > blocked> > > > by> > > > > > an> > > > > > > > > > > Internet Provider mail filters.> > > > > > > > > > > > So in a day, also check the> > > > Archived> > > > > > > > > responses at> > > > > > > > > > > http://www.linmodems.org .> > > > > > > > > > > > Local Linux experts can be> > found> > > > > > through:> > > > > > > > > > >> > http://www.linux.org/groups/index.html> > > > > > > > > > > > --------------------------> > System> > > > > > > information> > > > > > > > > > > ----------------------------> > > > > > > > > > > > CPU=i686, Ubuntu 6.10> > > > > > > > > > > > Linux version 2.6.17-10-generic> > > > > > > > > (root@terranova)> > > > > > > > > > > (gcc version 4.1.2 20060928> > > > (prerelease)> > > > > > > (Ubuntu> > > > > > > > > > > 4.1.1-13ubuntu5)) #2 SMP Tue Dec 5> > > > > > 22:28:26> > > > > > > UTC> > > > > > > > > 2006> > > > > > > > > > > (Ubuntu 2.6.17-10.34-generic)> > > > > > > > > > > > scanModem update of:> > 2006_Jan_21> > > > > > > > > > > > The modem symbolic link is> > > > /dev/modem ->> > > > > > > > > ttySHSF0> > > > > > > > > > > >> > > > > > > > > > > > USB modem not detected by lsusb> > > > > > > > > > > >> > > > > > > > > > > > Modem or host audio card> > candidates> > > > have> > > > > > > > > firmware> > > > > > > > > > > information:> > > > > > > > > > > >> > > > > > > > > > > > PCI slot PCI ID> > > > > > > SubsystemID> > > > > > > > > > > Name> > > > > > > > > > > > ---------- ---------> > > > > > ---------> > > > > > > > > > > --------------> > > > > > > > > > > > 00:1f.6 8086:2486> > > > > > 1014:0227> > > > > > > > > > > Modem: Intel Corporation> > 82801CA/CAM> > > > AC'97> > > > > > > Modem> > > > > > > > > > > Controller> > > > > > > > > > > >> > > > > > > > > > > > Modem interrupt assignment and> > > > sharing:> > > > > > > > > > > > 11: 87765 XT-PIC> > > > > > > > > uhci_hcd:usb1,> > > > > > > > > > > uhci_hcd:usb2, uhci_hcd:usb3,> > Intel> > > > > > > > > 82801CA-ICH3,> > > > > > > > > > > yenta, yenta, eth2, eth0,> > > > > > > > > radeon@pci:0000:01:00.0> > > > > > > > > > > >> > > > > > > > > > > > --- Bootup diagnositcs for card> > in> > > > PCI> > > > > > > slot> > > > > > > > > > > 00:1f.6 ----> > > > > > > > > > > > [17179571.896000] PCI: Enabling> > > > device> > > > > > > > > > > 0000:00:1f.6 (0000 -> 0001)> > > > > > > > > > > > [17179571.896000] ACPI: PCI> > > > Interrupt> > > > > > > > > > > 0000:00:1f.6[B] -> Link [LNKB] ->> > GSI> > > > 11> > > > > > > (level,> > > > > > > > > > > low) -> IRQ 11> > > > > > > > > > > > [17179571.896000] ACPI: PCI> > > > interrupt> > > > > > for> > > > > > > > > device> > > > > > > > > > > 0000:00:1f.6 disabled> > > > > > > > > > > > [17179598.180000] ACPI: PCI> > > > Interrupt> > > > > > > > > > > 0000:00:1f.6[B] -> Link [LNKB] ->> > GSI> > > > 11> > > > > > > (level,> > > > > > > > > > > low) -> IRQ 11> > > > > > > > > > > > [17179599.372000] PCI: Setting> > > > latency> > > > > > > timer> > > > > > > > > of> > > > > > > > > > > device 0000:00:1f.6 to 64> > > > > > > > > > > > [17179599.432000] ACPI: PCI> > > > interrupt> > > > > > for> > > > > > > > > device> > > > > > > > > > > 0000:00:1f.6 disabled> > > > > > > > > > > > [17179599.432000] hsfich: probe> > of> > > > > > > > > 0000:00:1f.6> > > > > > > > > > > failed with error -5> > > > > > > > > > > >> > > > > > > > > > > > The PCI slot 00:1f.6 of the> > modem> > > > card> > > > > > > may be> > > > > > > > > > > disabled early in> > > > > > > > > > > > a bootup process, but then> > enabled> > > > > > > later. If> > > > > > > > > > > modem drivers load> > > > > > > > > > > > but the modem is not> > responsive,> > > > read> > > > > > > > > Bootup.txt> > > > > > > > > > > about possible fixes.> > > > > > > > > > > > Send dmesg.txt along with> > > > ModemData.txt> > > > > > > to> > > > > > > > > > > discuss@xxxxxxxxxxxxx> > > > > > > > > > > > if help is needed.> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > > === Finished modem firmware and> > > > bootup> > > > > > > > > > > diagnostics section. ===> > > > > > > > > > > > === Next deducing cogent> > software> > > > ===> > > > > > > > > > > >> > > > > > > > > > > > ALSAversion 1.0.11> > > > > > > > > > > > Bootup diagnostic> > [17179599.384000]> > > > HSF:> > > > > > > > > ERROR:> > > > > > > > > > > SILICON Laboratories or LUCENT> > AC97> > > > modem> > > > > > > > > > > detected!<3>> > > > > > > > > > > > [17179599.384000] HSF: ERROR:> > This> > > > > > driver> > > > > > > only> > > > > > > > > > > supports CONEXANT devices<3>> > > > > > > > > > > > [17179599.384000] HSF: ERROR:> > not a> > > > > > > Conexant> > > > > > > > > > > modem<3>> > > > > > > > > > > > For candidate modem in PCI bus:> > > > > > 00:1f.6> > > > > > > > > > > > Class 0703: 8086:2486 Modem:> > > > Intel> > > > > > > > > Corporation> > > > > > > > > > > 82801CA/CAM AC'97 Modem Controller> > > > > > > > > > > > Primary PCI_id 8086:2486> > > > > > > > > > > > Subsystem PCI_id 1014:0227> > > > > > > > > > > > Softmodem codec or Vendor> > from> > > > > > > > > diagnostics:> > > > > > > > > > > >> > from> > > > > > > > > Archives:> > > > > > > > > > > SIL27, an AgereSystems type.> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > > Lacking a dsp (digital signal> > > > > > processing)> > > > > > > > > chip,> > > > > > > > > > > the modem is a software> > > > > > > > > > > > intensive or "softmodem" type.> > Its> > > > > > > primary> > > > > > > > > > > controller manages the traffic> > > > > > > > > > > > with the CPU. But the software> > > > needed> > > > > > is> > > > > > > > > > > specified in the Subsystem.> > > > > > > > > > > >> > > > > > -----------------------------------------> > > > > > > > > > > > Support type needed or chipset:> > > > slmodemd> > > > > > > > > > > >> > > > > > > > > > > > An ALSA (Advanced Linux Sound> > > > > > > Architecture)> > > > > > > > > modem> > > > > > > > > > > driver: snd-intel8x0m> > > > > > > > > > > > provides Low Level support> > enabling> > > > > > > contact> > > > > > > > > with> > > > > > > > > > > the modem hardware.> > > > > > > > > > > > For all BUT Conexant chip soft> > > > modems> > > > > > > (using> > > > > > > > > > > hsfmodem software)> > > > > > > > > > > > complementary High Level> > support is> > > > > > > through a> > > > > > > > > > > Smartlink utility: slmodemd> > > > > > > > > > > >> > > > > > > > > > > > Download from> > > > > > > > > > >> > > > > > > > >> > > > > > >> > > > > >> > > >> > http://linmodems.technion.ac.il/packages/smartlink/> > > > > > > > > > > > the package> > SLMODEMD.gcc4.tar.gz> > > > having> > > > > > a> > > > > > > > > > > compiled slmodemd. Unpack under> > Linux> > > > > > with:> > > > > > > > > > > > $ tar zxf> > > > SLMODEMD.gcc4.tar.gz> > > > > > > > > > > > and read instructions therein.> > But> > > > > > > briefly,> > > > > > > > > the> > > > > > > > > > > modem is setup with command:> > > > > > > > > > > > sudo slmodemd -c> > > > YOUR_COUNTRY> > > > > > > --alsa> > > > > > > > > > > modem:1> > > > > > > > > > > > reporting dynamic creation of> > > > ports:> > > > > > > > > > > > /dev/ttySL0 -->> > /dev/pts/N> > > > ,> > > > > > > with N> > > > > > > > > some> > > > > > > > > > > number> > > > > > > > > > > > Read Smartlink.txt and> > > > > > > Modem/YourSystem.txt> > > > > > > > > for> > > > > > > > > > > follow through guidance.> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > > The diagnostic outputs for this> > > > > > softmodem> > > > > > > > > section> > > > > > > > > > > have their raw information in> > > > > > > > > > > > folders and text files under> > > > > > /proc/asound/> > > > > > > > > which> > > > > > > > > > > you can browse. The information> > > > > > > > > > > > is from files:> > > > > > > > > > > > /proc/asound/pcm> > > > > > > > > > > > -------------------------------> > > > > > > > > > > > 00-01: Intel ICH - MIC ADC :> > Intel> > > > > > > > > 82801CA-ICH3 -> > > > > > > > > > > MIC ADC : capture 1> > > > > > > > > > > > 00-00: Intel ICH : Intel> > > > 82801CA-ICH3 :> > > > > > > > > playback 1> > > > > > > > > > > : capture 1> > > > > > > > > > > >> > > > > > > > > > > > /proc/asound/modules> > > > > > > > > > > > -------------------------------> > > > > > > > > > > > 0 snd_intel8x0> > > > > > > > > > > > and from the command:> > > > > > > > > > > > aplay -l | grep -i modem> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > > ----------------end Softmodem> > > > section> > > > > > > > > > > --------------> > > > > > > > > > > >> > > > > > > > > > > > Writing Intel.txt> > > > > > > > > > > > Writing Smartlink.txt> > > > > > > > > > > > ============ end Smartlink> > section> > > > > > > > > > > =====================> > > > > > > > > > > >> > > > > > > > > > > > Completed candidate modem> > analyses.> > > > > > > > > > > >> > > > > > > > > > > > The base of the UDEV device> > file> > > > system> > > > > > > is:> > > > > > > > > > > /dev/.udev> > > > > > > > > > > >> > > > > > > > > > > > Versions adequately match for> > the> > > > > > > compiler> > > > > > > > > > > installed: 4.1.2> > > > > > > > > > > > and the compiler> > used> > > > in> > > > > > > kernel> > > > > > > > > > > assembly: 4.1.2> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > > Compiling resources appear> > > > complete:> > > > > > > > > > > > make utility - /usr/bin/make> > > > > > > > > > > > Compiler version 4.1> > > > > > > > > > > > kernel_headers base folder> > > > > > > > > > >> > /lib/modules/2.6.17-10-generic/build> > > > > > > > > > > > Compressed files at:> > > > > > > /usr/src/sl-modem.tar.bz2> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > > Checking pppd properties:> > > > > > > > > > > > -rwsr-xr-- 1 root dip> > 260920> > > > > > > > > 2006-07-10> > > > > > > > > > > 15:13 /usr/sbin/pppd> > > > > > > > > > > >> > > > > > > > > > > > In case of an "error 17" "serial> > > > > > loopback"> > > > > > > > > > > problem, see:> > > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> >> http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html> > > > > > > > > > > >> > > > > > > > > > > > To enable dialout without Root> > > > > > permission> > > > > > > do:> > > > > > > > > > > > $ su - root (not for> > > > Ubuntu)> > > > > > > > > > > > sudo chmod a+x> > > > /usr/sbin/pppd> > > > > > > > > > > > or under Ubuntu related Linuxes> > > > > > > > > > > > sudo chmod a+x> > > > /usr/sbin/pppd> > > > > > > > > > > >> > > > > > > > > > > > Checking settings of:> > > > /etc/ppp/options> > > > > > > > > > > > asyncmap 0> > > > > > > > > > > > auth> > > > > > > > > > > > crtscts> > > > > > > > > > > > lock> > > > > > > > > > > > hide-password> > > > > > > > > > > > modem> > > > > > > > > > > > proxyarp> > > > > > > > > > > > lcp-echo-interval 30> > > > > > > > > > > > lcp-echo-failure 4> > > > > > > > > > > > noipx> > > > > > > > > > > >> > > > > > > > > > > > In case of a message like:> > > > > > > > > > > > Warning: Could not modify> > > > > > > > > /etc/ppp/pap-secrets:> > > > > > > > > > > Permission denied> > > > > > > > > > > > see> > > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> >> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html> > > > > > > > > > > >> > > > > > > > > > > > Read Modem/YourSystem.txt> > concerning> > > > > > other> > > > > > > > > COMM> > > > > > > > > > > channels: eth0 eth2> > > > > > > > > > > > Which can interfere with Browser> > > > > > > naviagation.> > > > > > > > > > > >> > > > > > > > > > > > Don't worry about the> > following, it> > > > is> > > > > > > for> > > > > > > > > the> > > > > > > > > > > experts> > > > > > > > > > > > should trouble shooting be> > > > necessary.> > > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> >> ==========================================================> > > > > > > > > > > >> > > > > > > > > > > > Checking for modem support> > lines:> > > > > > > > > > > >> > > > --------------------------------------> > > > > > > > > > > > /device/modem symbolic> > link:> > > > > > > lrwxrwxrwx> > > > > > > > > 1> > > > > > > > > > > root root 8 2007-01-22 04:30> > > > /dev/modem ->> > > > > > > > > ttySHSF0> > > > > > > > > > > > slmodemd created symbolic link> > > > > > > /dev/ttySL0:> > > > > > > > > > > > Within /etc/udev/ files:> > > > > > > > > > > >> > > > /etc/udev/rules.d/60-symlinks.rules:#> > > > > > > Create> > > > > > > > > > > /dev/modem symlink> > > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> >> /etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*",> > > > > > > > > > >> > SYMLINK+="modem"> > > > > > > > > > > >> > > > > > > > >> > > > > >> > /etc/udev/rules.d/hsf.rules:KERNEL=="ttySHSF0",> > > > > > > > > > > SYMLINK="modem"> > > > > > > > > > > > Within /etc/modprobe.conf> > > > files:> > > > > > > > > > > >> > /etc/modprobe.d/alsa-base:options> > > > > > > > > snd-atiixp-modem> > > > > > > > > > > index=-2> > > > > > > > > > > >> > /etc/modprobe.d/alsa-base:options> > > > > > > > > > > snd-via82xx-modem index=-2> > > > > > > > > > > >> > /etc/modprobe.d/blacklist-modem:#> > > > > > > Uncomment> > > > > > > > > these> > > > > > > > > > > entries in order to blacklist> > unwanted> > > > > > modem> > > > > > > > > drivers> > > > > > > > > > > >> > /etc/modprobe.d/blacklist-modem:#> > > > > > > blacklist> > > > > > > > > > > snd-atiixp-modem> > > > > > > > > > > >> > /etc/modprobe.d/blacklist-modem:#> > > > > > > blacklist> > > > > > > > > > > snd-via82xx-modem> > > > > > > > > > > >> > > > /etc/modprobe.d/hsf.conflicts:install> > > > > > > > > > > snd-via82xx-modem /bin/true #> > > > temporarily> > > > > > > > > disabled> > > > > > > > > > > by hsf - conflicts with hsfmc97via> > > > > > > > > > > >> > > > /etc/modprobe.d/hsf.conflicts:install> > > > > > > > > > > snd-atiixp-modem /bin/true #> > > > temporarily> > > > > > > > > disabled by> > > > > > > > > > > hsf - conflicts with hsfmc97ati> > > > > > > > > > > > /etc/modprobe.d/hsf:alias> > /dev/modem> > > > > > > > > /dev/ttySHSF> > > > > > > > > > > > Within any ancient> > /etc/devfs> > > > > > files:> > > > > > > > > > > >> > /etc/devfs/conf.d/hsf.conf:LOOKUP> > > > > > > > > > > ^(ttySHSF[0-9]|modem$) EXECUTE> > nice> > > > > > > > > /sbin/modprobe> > > > > > > > > > > /dev/ttySHSF> > > > > > > > > > > >> > /etc/devfs/conf.d/hsf.conf:REGISTER> > > > > > > > > ^ttySHSF0$> > > > > > > > > > > CFUNCTION GLOBAL symlink $devname> > > > modem> > > > > > > > > > > >> > > > /etc/devfs/conf.d/hsf.conf:UNREGISTER> > > > > > > > > ^ttySHSF0$> > > > > > > > > > > CFUNCTION GLOBAL unlink modem> > > > > > > > > > > > Within ancient kernel 2.4.n> > > > > > > > > /etc/module.conf> > > > > > > > > > > files:> > > > > > > > > > > >> > > > > > > > > > > > --------- end modem support> > lines> > > > > > --------> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> >> ____________________________________________________________________________________> > > > > > > > > > Never miss an email again!> > > > > > > > > > Yahoo! Toolbar alerts you the> > instant> > > > new> > > > > > Mail> > > > > > > > > arrives.> > > > > > > > > >> > > > > > > > >> > > > > > >> > > > > >> > > >> > http://tools.search.yahoo.com/toolbar/features/mail/> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> >> ____________________________________________________________________________________> > > > > > > > Yahoo! Music Unlimited> > > > > > > > Access over 1 million songs.> > > > > > > > http://music.yahoo.com/unlimited> > > > > > > >> > > > > > > > Only plain text email is forwarded by> > the> > > > > > > DISCUSS@xxxxxxxxxxxxx List Server.> > > > > > > > Do use the following as the email> > Subject> > > > Line:> > > > > > > > SomeName, YourCountry Ubuntu> > 6.10> > > > > > > kernel 2.6.17-10-generic> > > > > > > > This will alert cogent experts, and> > > > > > distinguish> > > > > > > cases in the Archives.> > > > > > > > YourCountry will enable Country Code> > > > guidance.> > > > > > > > Occassionally responses are blocked by> > an> > > > > > > Internet Provider mail filters.> > > > > > > > So in a day, also check the Archived> > > > responses> > > > > > at> > > > > > > http://www.linmodems.org .> > > > > > > > Local Linux experts can be found> > through:> > > > > > > http://www.linux.org/groups/index.html> > > > > > > > -------------------------- System> > > > information> > > > > > > ----------------------------> > > > > > > > CPU=i686, Ubuntu 6.10> > > > > > > > Linux version 2.6.17-10-generic> > > > (root@terranova)> > > > > > > (gcc version 4.1.2 20060928 (prerelease)> > > > (Ubuntu> > > > > > > 4.1.1-13ubuntu5)) #2 SMP Tue Dec 5> > 22:28:26> > > > UTC> > > > > > 2006> > > > > > > (Ubuntu 2.6.17-10.34-generic)> > > > > > > > scanModem update of: 2006_Jan_21> > > > > > > > The modem symbolic link is /dev/modem ->> > > > ttySL0> > > > > > > >> > > > > > > > USB modem not detected by lsusb> > > > > > > >> > > > > > > > Modem or host audio card candidates have> > > > > > firmware> > > > > > > information:> > > > > > > >> > > > > > > > PCI slot PCI ID> > SubsystemID> > > > > > > Name> > > > > > > > ---------- ---------> > ---------> > > > > > > --------------> > > > > > > > 00:1f.6 8086:2486> > 1014:0227> > > > > > > Modem: Intel Corporation 82801CA/CAM AC'97> > > > Modem> > > > > > > Controller> > > > > > > >> > > > > > > > Modem interrupt assignment and sharing:> > > > > > > > 11: 12456 XT-PIC> > > > uhci_hcd:usb1,> > > > > > > uhci_hcd:usb2, uhci_hcd:usb3, Intel> > > > 82801CA-ICH3,> > > > > > > yenta, yenta, eth2, eth0,> > > > radeon@pci:0000:01:00.0> > > > > > > >> > > > > > > > --- Bootup diagnositcs for card in PCI> > slot> > > > > > > 00:1f.6 ----> > > > > > > > [17179573.004000] PCI: Enabling device> > > > > > > 0000:00:1f.6 (0000 -> 0001)> > > > > > > > [17179573.004000] ACPI: PCI Interrupt> > > > > > > 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179573.004000] ACPI: PCI interrupt> > for> > > > device> > > > > > > 0000:00:1f.6 disabled> > > > > > > > [17179596.284000] ACPI: PCI Interrupt> > > > > > > 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179597.284000] PCI: Setting latency> > timer> > > > of> > > > > > > device 0000:00:1f.6 to 64> > > > > > > > [17179597.332000] ACPI: PCI interrupt> > for> > > > device> > > > > > > 0000:00:1f.6 disabled> > > > > > > > [17179597.332000] hsfich: probe of> > > > 0000:00:1f.6> > > > > > > failed with error -5> > > > > > > >> > > > > > > > The PCI slot 00:1f.6 of the modem card> > may> > > > be> > > > > > > disabled early in> > > > > > > > a bootup process, but then enabled> > later.> > > > If> > > > > > > modem drivers load> > > > > > > > but the modem is not responsive, read> > > > > > Bootup.txt> > > > > > > about possible fixes.> > > > > > > > Send dmesg.txt along with ModemData.txt> > to> > > > > > > discuss@xxxxxxxxxxxxx> > > > > > > > if help is needed.> > > > > > > >> > > > > > > >> > > > > > > > === Finished modem firmware and bootup> > > > > > > diagnostics section. ===> > > > > > > > === Next deducing cogent software ===> > > > > > > >> > > > > > > > ALSAversion 1.0.11> > > > > > > > Bootup diagnostic [17179597.284000] HSF:> > > > ERROR:> > > > > > > SILICON Laboratories or LUCENT AC97 modem> > > > > > > detected!<3>> > > > > > > > [17179597.284000] HSF: ERROR: This> > driver> > > > only> > > > > > > supports CONEXANT devices<3>> > > > > > > > [17179597.284000] HSF: ERROR: not a> > Conexant> > > > > > > modem<3>> > > > > > > > For candidate modem in PCI bus:> > 00:1f.6> > > > > > > > Class 0703: 8086:2486 Modem: Intel> > > > > > Corporation> > > > > > > 82801CA/CAM AC'97 Modem Controller> > > > > > > > Primary PCI_id 8086:2486> > > > > > > > Subsystem PCI_id 1014:0227> > > > > > > > Softmodem codec or Vendor from> > > > diagnostics:> > > > > > > > from> > > > Archives:> > > > > > > SIL27, an AgereSystems type.> > > > > > > >> > > > > > > >> > > > > > > > Lacking a dsp (digital signal> > processing)> > > > chip,> > > > > > > the modem is a software> > > > > > > > intensive or "softmodem" type. Its> > primary> > > > > > > controller manages the traffic> > > > > > > > with the CPU. But the software needed> > is> > > > > > > specified in the Subsystem.> > > > > > > >> > -----------------------------------------> > > > > > > > Support type needed or chipset: slmodemd> > > > > > > >> > > > > > > > An ALSA (Advanced Linux Sound> > Architecture)> > > > > > modem> > > > > > > driver: snd-intel8x0m> > > > > > > > provides Low Level support enabling> > contact> > > > > > with> > > > > > > the modem hardware.> > > > > > > > For all BUT Conexant chip soft modems> > > > (using> > > > > > > hsfmodem software)> > > > > > > > complementary High Level support is> > through> > > > a> > > > > > > Smartlink utility: slmodemd> > > > > > > >> > > > > > > > Download from> > > > > > >> > > > > >> > > >> > http://linmodems.technion.ac.il/packages/smartlink/> > > > > > > > the package SLMODEMD.gcc4.tar.gz having> > a> > > > > > > compiled slmodemd. Unpack under Linux> > with:> > > > > > > > $ tar zxf SLMODEMD.gcc4.tar.gz> > > > > > > > and read instructions therein. But> > briefly,> > > > the> > > > > > > modem is setup with command:> > > > > > > > sudo slmodemd -c YOUR_COUNTRY> > --alsa> > > > > > > modem:1> > > > > > > > reporting dynamic creation of ports:> > > > > > > > /dev/ttySL0 --> /dev/pts/N ,> > with> > > > N> > > > > > some> > > > > > > number> > > > > > > > Read Smartlink.txt and> > Modem/YourSystem.txt> > > > for> > > > > > > follow through guidance.> > > > > > > >> > > > > > > >> > > > > > > > The diagnostic outputs for this> > softmodem> > > > > > section> > > > > > > have their raw information in> > > > > > > > folders and text files under> > /proc/asound/> > > > which> > > > > > > you can browse. The information> > > > > > > > is from files:> > > > > > > > /proc/asound/pcm> > > > > > > > -------------------------------> > > > > > > > 00-01: Intel ICH - MIC ADC : Intel> > > > 82801CA-ICH3> > > > > > -> > > > > > > MIC ADC : capture 1> > > > > > > > 00-00: Intel ICH : Intel 82801CA-ICH3 :> > > > playback> > > > > > 1> > > > > > > : capture 1> > > > > > > >> > > > > > > > /proc/asound/modules> > > > > > > > -------------------------------> > > > > > > > 0 snd_intel8x0> > > > > > > > and from the command:> > > > > > > > aplay -l | grep -i modem> > > > > > > >> > > > > > > >> > > > > > > > ----------------end Softmodem section> > > > > > > --------------> > > > > > > >> > > > > > > > Writing Intel.txt> > > > > > > > Writing Smartlink.txt> > > > > > > > ============ end Smartlink section> > > > > > > =====================> > > > > > > >> > > > > > > > Completed candidate modem analyses.> > > > > > > >> > > > > > > > The base of the UDEV device file system> > is:> > > > > > > /dev/.udev> > > > > > > >> > > > > > > > Versions adequately match for the> > compiler> > > > > > > installed: 4.1.2> > > > > > > > and the compiler used in> > kernel> > > > > > > assembly: 4.1.2> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > > Compiling resources appear complete:> > > > > > > > make utility - /usr/bin/make> > > > > > > > Compiler version 4.1> > > > > > > > kernel_headers base folder> > > > > > > /lib/modules/2.6.17-10-generic/build> > > > > > > > Compressed files at:> > > > /usr/src/sl-modem.tar.bz2> > > > > > > >> > > > > > > >> > > > > > > > Checking pppd properties:> > > > > > > > -rwsr-xr-- 1 root dip 260920> > > > 2006-07-10> > > > > > > 15:13 /usr/sbin/pppd> > > > > > > >> > > > > > > > In case of an "error 17" "serial> > loopback"> > > > > > > problem, see:> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> >> http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html> > > > > > > >> > > > > > > > To enable dialout without Root> > permission> > > > do:> > > > > > > > $ su - root (not for Ubuntu)> > > > > > > > sudo chmod a+x /usr/sbin/pppd> > > > > > > > or under Ubuntu related Linuxes> > > > > > > > sudo chmod a+x /usr/sbin/pppd> > > > > > > >> > > > > > > > Checking settings of: /etc/ppp/options> > > > > > > > asyncmap 0> > > > > > > > auth> > > > > > > > crtscts> > > > > > > > lock> > > > > > > > hide-password> > > > > > > > modem> > > > > > > > proxyarp> > > > > > > > lcp-echo-interval 30> > > > > > > > lcp-echo-failure 4> > > > > > > > noipx> > > > > > > >> > > > > > > > In case of a message like:> > > > > > > > Warning: Could not modify> > > > > > /etc/ppp/pap-secrets:> > > > > > > Permission denied> > > > > > > > see> > > > > > >> > > > > >> > > > >> > > >> > >> >> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html> > > > > > > >> > > > > > > > Read Modem/YourSystem.txt concerning> > other> > > > COMM> > > > > > > channels: eth0 eth2> > > > > > > > Which can interfere with Browser> > > > naviagation.> > > > > > > >> > > > > > > > Don't worry about the following, it is> > for> > > > the> > > > > > > experts> > > > > > > > should trouble shooting be necessary.> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> >> ==========================================================> > > > > > > >> > > > > > > > # start/stop the daemon when the USB> > modem> > > > is> > > > > > > connected> > > > > > > > KERNEL=="slusb[0-9]*", GROUP="dialout",> > > > > > > RUN+="/etc/init.d/sl-modem-daemon"> > > > > > > > Checking for modem support lines:> > > > > > > > --------------------------------------> > > > > > > > /device/modem symbolic link:> > > > lrwxrwxrwx 1> > > > > > > root root 6 2007-01-26 11:38 /dev/modem ->> > > > ttySL0> > > > > > > > slmodemd created symbolic link> > /dev/ttySL0:> > > > > > > > Within /etc/udev/ files:> > > > > > > > /etc/udev/rules.d/60-symlinks.rules:#> > Create> > > > > > > /dev/modem symlink> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> >> /etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*",> > > > > > > SYMLINK+="modem"> > > > > > > >> > > > /etc/udev/rules.d/hsf.rules:KERNEL=="ttySHSF0",> > > > > > > SYMLINK="modem"> > > > > > > >> > > > /etc/udev/rules.d/030_sl-modem-daemon.rules:#> > > > > > > start/stop the daemon when the USB modem> > is> > > > > > > connected> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> >> /etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*",> > > > > > > GROUP="dialout",> > > > > > RUN+="/etc/init.d/sl-modem-daemon"> > > > > > > > /etc/udev/sl-modem-daemon.rules:#> > start/stop> > > > the> > > > > > > daemon when the USB modem is connected> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> >> /etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*",> > > > > > > GROUP="dialout",> > > > > > RUN+="/etc/init.d/sl-modem-daemon"> > > > > > > > Within /etc/modprobe.conf files:> > > > > > > > /etc/modprobe.d/alsa-base:options> > > > > > snd-atiixp-modem> > > > > > > index=-2> > > > > > > > /etc/modprobe.d/alsa-base:options> > > > > > > snd-via82xx-modem index=-2> > > > > > > > /etc/modprobe.d/blacklist-modem:#> > Uncomment> > > > > > these> > > > > > > entries in order to blacklist unwanted> > modem> > > > > > drivers> > > > > > > > /etc/modprobe.d/blacklist-modem:#> > blacklist> > > > > > > snd-atiixp-modem> > > > > > > > /etc/modprobe.d/blacklist-modem:#> > blacklist> > > > > > > snd-via82xx-modem> > > > > > > > /etc/modprobe.d/hsf.conflicts:install> > > > > > > snd-via82xx-modem /bin/true # temporarily> > > > disabled> > > > > > > by hsf - conflicts with hsfmc97via> > > > > > > > /etc/modprobe.d/hsf.conflicts:install> > > > > > > snd-atiixp-modem /bin/true # temporarily> > > > disabled> > > > > > by> > > > > > > hsf - conflicts with hsfmc97ati> > > > > > > > /etc/modprobe.d/hsf:alias /dev/modem> > > > > > /dev/ttySHSF> > > > > > > >> > > > /etc/modprobe.d/sl-modem-daemon.modutils:install> > > > > > > slamr modprobe --ignore-install> > > > ungrab-winmodem ;> > > > > > > modprobe --ignore-install slamr; test -e> > > > > > /dev/slamr0> > > > > > > || (/bin/mknod -m 660 /dev/slamr0 c 242 0> > > > > > > 2>/dev/null && chgrp dialout /dev/slamr0)> > > > > > > > Within any ancient /etc/devfs> > files:> > > > > > > > /etc/devfs/conf.d/hsf.conf:LOOKUP> > > > > > > ^(ttySHSF[0-9]|modem$) EXECUTE nice> > > > /sbin/modprobe> > > > > > > /dev/ttySHSF> > > > > > > > /etc/devfs/conf.d/hsf.conf:REGISTER> > > > > > ^ttySHSF0$> > > > > > > CFUNCTION GLOBAL symlink $devname modem> > > > > > > > /etc/devfs/conf.d/hsf.conf:UNREGISTER> > > > > > ^ttySHSF0$> > > > > > > CFUNCTION GLOBAL unlink modem> > > > > > > > Within ancient kernel 2.4.n> > > > > > /etc/module.conf> > > > > > > files:> > > > > > > >> > > > > > > > --------- end modem support lines> > --------> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > > [17179569.184000] Linux version> > > > > > 2.6.17-10-generic> > > > > > > (root@terranova) (gcc version 4.1.2> > 20060928> > > > > > > (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2> > SMP> > > > Tue> > > > > > > Dec 5 22:28:26 UTC 2006 (Ubuntu> > > > > > > 2.6.17-10.34-generic)> > > > > > > > [17179569.184000] BIOS-provided physical> > RAM> > > > > > map:> > > > > > > > [17179569.184000] BIOS-e820:> > > > 0000000000000000 -> > > > > > > 000000000009f000 (usable)> > > > > > > > [17179569.184000] BIOS-e820:> > > > 000000000009f000 -> > > > > > > 00000000000a0000 (reserved)> > > > > > > > [17179569.184000] BIOS-e820:> > > > 00000000000dc000 -> > > > > > > 0000000000100000 (reserved)> > > > > > > > [17179569.184000] BIOS-e820:> > > > 0000000000100000 -> > > > > > > 0000000017f60000 (usable)> > > > > > > > [17179569.184000] BIOS-e820:> > > > 0000000017f60000 -> > > > > > > 0000000017f7a000 (ACPI data)> > > > > > > > [17179569.184000] BIOS-e820:> > > > 0000000017f7a000 -> > > > > > > 0000000017f7c000 (ACPI NVS)> > > > > > > > [17179569.184000] BIOS-e820:> > > > 0000000017f7c000 -> > > > > > > 0000000018000000 (reserved)> > > > > > > > [17179569.184000] BIOS-e820:> > > > 00000000ff800000 -> > > > > > > 0000000100000000 (reserved)> > > > > > > > [17179569.184000] 0MB HIGHMEM available.> > > > > > > > [17179569.184000] 383MB LOWMEM> > available.> > > > > > > > [17179569.184000] On node 0 totalpages:> > > > 98144> > > > > > > > [17179569.184000] DMA zone: 4096> > pages,> > > > LIFO> > > > > > > batch:0> > > > > > > > [17179569.184000] Normal zone: 94048> > > > pages,> > > > > > LIFO> > > > > > > batch:31> > > > > > > > [17179569.184000] DMI present.> > > > > > > > [17179569.184000] ACPI: RSDP (v002 IBM> > > > > >> > > > > > > ) @ 0x000f73b0> > > > > > > > [17179569.184000] ACPI: XSDT (v001 IBM> > > > TP-1E> > > > > >> > > > > > > 0x00001061 LTP 0x00000000) @ 0x17f6f1e3> > > > > > > > [17179569.184000] ACPI: FADT (v001 IBM> > > > TP-1E> > > > > >> > > > > > > 0x00001061 IBM 0x00000001) @ 0x17f6f227> > > > > > > > [17179569.184000] ACPI: SSDT (v001 IBM> > > > TP-1E> > > > > >> > > > > > > 0x00001061 MSFT 0x0100000d) @ 0x17f6f2db> > > > > > > > [17179569.184000] ACPI: ECDT (v001 IBM> > > > TP-1E> > > > > >> > > > > > > 0x00001061 IBM 0x00000001) @ 0x17f79f87> > > > > > > > [17179569.184000] ACPI: BOOT (v001 IBM> > > > TP-1E> > > > > >> > > > > > > 0x00001061 LTP 0x00000001) @ 0x17f79fd8> > > > > > > > [17179569.184000] ACPI: DSDT (v001 IBM> > > > TP-1E> > > > > >> > > > > > > 0x00001061 MSFT 0x0100000d) @ 0x00000000> > > > > > > > [17179569.184000] ACPI: PM-Timer IO> > Port:> > > > 0x1008> > > > > > > > [17179569.184000] Allocating PCI> > resources> > > > > > > starting at 20000000 (gap:> > 18000000:e7800000)> > > > > > > > [17179569.184000] Built 1 zonelists> > > > > > > > [17179569.184000] Kernel command line:> > > > > > > root=/dev/hda1 ro quiet splash> > > > > > > > [17179569.184000] Local APIC disabled by> > > > BIOS> > > > > > (or> > > > > > > by default) -- you can enable it with> > "lapic"> > > > > > > > [17179569.184000] mapped APIC to> > ffffd000> > > > > > > (0130a000)> > > > > > > > [17179569.184000] Enabling fast FPU save> > and> > > > > > > restore... done.> > > > > > > > [17179569.184000] Enabling unmasked SIMD> > FPU> > > > > > > exception support... done.> > > > > > > > [17179569.184000] Initializing CPU#0> > > > > > > > [17179569.184000] PID hash table> > entries:> > > > 2048> > > > > > > (order: 11, 8192 bytes)> > > > > > > > [17179569.184000] Detected 1132.526 MHz> > > > > > processor.> > > > > > > > [17179569.184000] Using pmtmr for> > high-res> > > > > > > timesource> > > > > > > > [17179569.184000] Console: colour VGA+> > 80x25> > > > > > > > [17179571.556000] Dentry cache hash> > table> > > > > > entries:> > > > > > > 65536 (order: 6, 262144 bytes)> > > > > > > > [17179571.556000] Inode-cache hash table> > > > > > entries:> > > > > > > 32768 (order: 5, 131072 bytes)> > > > > > > > [17179571.580000] Memory:> > 379368k/392576k> > > > > > > available (1910k kernel code, 12576k> > reserved,> > > > > > 1069k> > > > > > > data, 308k init, 0k highmem)> > > > > > > > [17179571.580000] Checking if this> > processor> > > > > > > honours the WP bit even in supervisor> > mode...> > > > Ok.> > > > > > > > [17179571.660000] Calibrating delay> > using> > > > timer> > > > > > > specific routine.. 2267.11 BogoMIPS> > > > (lpj=4534228)> > > > > > > > [17179571.660000] Security Framework> > v1.0.0> > > > > > > initialized> > > > > > > > [17179571.660000] SELinux: Disabled at> > > > boot.> > > > > > > > [17179571.660000] Mount-cache hash table> > > > > > entries:> > > > > > > 512> > > > > > > > [17179571.660000] CPU: After generic> > > > identify,> > > > > > > caps: 0383f9ff 00000000 00000000 00000000> > > > 00000000> > > > > > > 00000000 00000000> > > > > > > > [17179571.660000] CPU: After vendor> > > > identify,> > > > > > > caps: 0383f9ff 00000000 00000000 00000000> > > > 00000000> > > > > > > 00000000 00000000> > > > > > > > [17179571.660000] CPU: L1 I cache: 16K,> > L1 D> > > > > > > cache: 16K> > > > > > > > [17179571.660000] CPU: L2 cache: 512K> > > > > > > > [17179571.660000] CPU: After all inits,> > > > caps:> > > > > > > 0383f9ff 00000000 00000000 00000040> > 00000000> > > > > > > 00000000 00000000> > > > > > > > [17179571.660000] Checking 'hlt'> > > > instruction...> > > > > > > OK.> > > > > > > > [17179571.676000] SMP alternatives:> > > > switching to> > > > > > > UP code> > > > > > > > [17179571.676000] Freeing SMP> > alternatives:> > > > 16k> > > > > > > freed> > > > > > > > [17179571.676000] checking if image is> > > > > > > initramfs... it is> > > > > > > > [17179572.484000] Freeing initrd memory:> > > > 5322k> > > > > > > freed> > > > > > > > [17179572.484000] ACPI: Core revision> > > > 20060707> > > > > > > > [17179572.484000] ACPI: Looking for DSDT> > ...> > > > not> > > > > > > found!> > > > > > > > [17179572.492000] ACPI: setting ELCR to> > 0200> > > > > > (from> > > > > > > 0800)> > > > > > > > [17179572.504000] CPU0: Intel(R)> > Pentium(R)> > > > III> > > > > > > Mobile CPU 1133MHz stepping 01> > > > > > > > [17179572.504000] SMP motherboard not> > > > detected.> > > > > > > > [17179572.504000] Local APIC not> > detected.> > > > Using> > > > > > > dummy APIC emulation.> > > > > > > > [17179572.504000] Brought up 1 CPUs> > > > > > > > [17179572.504000] migration_cost=0> > > > > > > > [17179572.504000] NET: Registered> > protocol> > > > > > family> > > > > > > 16> > > > > > > > [17179572.504000] EISA bus registered> > > > > > > > [17179572.504000] ACPI: bus type pci> > > > registered> > > > > > > > [17179572.504000] PCI: PCI BIOS revision> > > > 2.10> > > > > > > entry at 0xfd8fe, last bus=8> > > > > > > > [17179572.504000] PCI: Using> > configuration> > > > type> > > > > > 1> > > > > > > > [17179572.504000] Setting up standard> > PCI> > > > > > > resources> > > > > > > > [17179572.508000] ACPI: Found ECDT> > > > > > > > [17179572.508000] ACPI: Could not use> > ECDT> > > > > > > > [17179572.516000] ACPI Error> > > > (evregion-0317): No> > > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > > [EmbeddedControl] [20060707]> > > > > > > > [17179572.516000] ACPI Error> > (exfldio-0290):> > > > > > > Region EmbeddedControl(3) has no handler> > > > > > [20060707]> > > > > > > > [17179572.516000] ACPI Exception> > > > (dswexec-0458):> > > > > > > AE_NOT_EXIST, While resolving operands for> > > > > > > [OpcodeName unavailable] [20060707]> > > > > > > > [17179572.516000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.FDC_._INI] (Node> > d7f40770),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.516000] ACPI Error> > > > (evregion-0317): No> > > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > > [EmbeddedControl] [20060707]> > > > > > > > [17179572.516000] ACPI Error> > (exfldio-0290):> > > > > > > Region EmbeddedControl(3) has no handler> > > > > > [20060707]> > > > > > > > [17179572.516000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__._INI] (Node> > d7f44bd0),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.520000] ACPI: Interpreter> > enabled> > > > > > > > [17179572.520000] ACPI: Using PIC for> > > > interrupt> > > > > > > routing> > > > > > > > [17179572.520000] ACPI: PCI Interrupt> > Link> > > > > > [LNKA]> > > > > > > (IRQs 3 4 5 6 7 9 10 *11)> > > > > > > > [17179572.520000] ACPI: PCI Interrupt> > Link> > > > > > [LNKB]> > > > > > > (IRQs 3 4 5 6 7 9 10 *11)> > > > > > > > [17179572.520000] ACPI: PCI Interrupt> > Link> > > > > > [LNKC]> > > > > > > (IRQs 3 4 5 6 7 9 10 *11)> > > > > > > > [17179572.524000] ACPI: PCI Interrupt> > Link> > > > > > [LNKD]> > > > > > > (IRQs 3 4 5 6 7 9 10 *11)> > > > > > > > [17179572.524000] ACPI: PCI Interrupt> > Link> > > > > > [LNKE]> > > > > > > (IRQs 3 4 5 6 7 9 10 *11)> > > > > > > > [17179572.524000] ACPI: PCI Interrupt> > Link> > > > > > [LNKF]> > > > > > > (IRQs 3 4 5 6 7 9 10 11) *0, disabled.> > > > > > > > [17179572.524000] ACPI: PCI Interrupt> > Link> > > > > > [LNKG]> > > > > > > (IRQs 3 4 5 6 7 9 10 11) *0, disabled.> > > > > > > > [17179572.524000] ACPI: PCI Interrupt> > Link> > > > > > [LNKH]> > > > > > > (IRQs 3 4 5 6 7 9 10 11) *0, disabled.> > > > > > > > [17179572.528000] ACPI: PCI Root Bridge> > > > [PCI0]> > > > > > > (0000:00)> > > > > > > > [17179572.528000] PCI: Probing PCI> > hardware> > > > (bus> > > > > > > 00)> > > > > > > > [17179572.528000] ACPI Error> > > > (evregion-0317): No> > > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > > [EmbeddedControl] [20060707]> > > > > > > > [17179572.528000] ACPI Error> > (exfldio-0290):> > > > > > > Region EmbeddedControl(3) has no handler> > > > > > [20060707]> > > > > > > > [17179572.528000] ACPI Exception> > > > (dswexec-0458):> > > > > > > AE_NOT_EXIST, While resolving operands for> > > > > > > [OpcodeName unavailable] [20060707]> > > > > > > > [17179572.528000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node> > > > d7f44f68),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.528000] ACPI Error> > (uteval-0212):> > > > > > Method> > > > > > > execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BAT0._STA]> > > > > > > (Node d7f44f68), AE_NOT_EXIST> > > > > > > > [17179572.528000] ACPI Error> > > > (evregion-0317): No> > > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > > [EmbeddedControl] [20060707]> > > > > > > > [17179572.528000] ACPI Error> > (exfldio-0290):> > > > > > > Region EmbeddedControl(3) has no handler> > > > > > [20060707]> > > > > > > > [17179572.528000] ACPI Exception> > > > (dswexec-0458):> > > > > > > AE_NOT_EXIST, While resolving operands for> > > > > > > [OpcodeName unavailable] [20060707]> > > > > > > > [17179572.528000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node> > > > d7f44e78),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.528000] ACPI Error> > (uteval-0212):> > > > > > Method> > > > > > > execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BAT1._STA]> > > > > > > (Node d7f44e78), AE_NOT_EXIST> > > > > > > > [17179572.528000] ACPI Error> > > > (evregion-0317): No> > > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > > [EmbeddedControl] [20060707]> > > > > > > > [17179572.528000] ACPI Error> > (exfldio-0290):> > > > > > > Region EmbeddedControl(3) has no handler> > > > > > [20060707]> > > > > > > > [17179572.528000] ACPI Exception> > > > (dswexec-0458):> > > > > > > AE_NOT_EXIST, While resolving operands for> > > > > > > [OpcodeName unavailable] [20060707]> > > > > > > > [17179572.528000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__.BLID] (Node> > d7f40a68),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.528000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__.BLII] (Node> > d7f40a7c),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.528000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__.BLPC] (Node> > d7f40aa4),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.528000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.IDE0.PRIM.SLAV._STA] (Node> > > > d7f407d4),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.528000] ACPI Error> > (uteval-0212):> > > > > > Method> > > > > > > execution failed> > > > [\_SB_.PCI0.IDE0.PRIM.SLAV._STA]> > > > > > > (Node d7f407d4), AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > > > (evregion-0317): No> > > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > > [EmbeddedControl] [20060707]> > > > > > > > [17179572.532000] ACPI Error> > (exfldio-0290):> > > > > > > Region EmbeddedControl(3) has no handler> > > > > > [20060707]> > > > > > > > [17179572.532000] ACPI Exception> > > > (dswexec-0458):> > > > > > > AE_NOT_EXIST, While resolving operands for> > > > > > > [OpcodeName unavailable] [20060707]> > > > > > > > [17179572.532000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__.BRID] (Node> > d7f40900),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__.BRII] (Node> > d7f40914),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__.BRPC] (Node> > d7f4093c),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node> > > > d7f407ac),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > (uteval-0212):> > > > > > Method> > > > > > > execution failed> > > > [\_SB_.PCI0.IDE0.SCND.MSTR._STA]> > > > > > > (Node d7f407ac), AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > > > (evregion-0317): No> > > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > > [EmbeddedControl] [20060707]> > > > > > > > [17179572.532000] ACPI Error> > (exfldio-0290):> > > > > > > Region EmbeddedControl(3) has no handler> > > > > > [20060707]> > > > > > > > [17179572.532000] ACPI Exception> > > > (dswexec-0458):> > > > > > > AE_NOT_EXIST, While resolving operands for> > > > > > > [OpcodeName unavailable] [20060707]> > > > > > > > [17179572.532000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__.BLID] (Node> > d7f40a68),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__.BLII] (Node> > d7f40a7c),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__.BLPC] (Node> > d7f40aa4),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__.BSTA] (Node> > d7f40be4),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.USB0.URTH.UNST._STA] (Node> > > > d7f4048c),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > (uteval-0212):> > > > > > Method> > > > > > > execution failed> > > > [\_SB_.PCI0.USB0.URTH.UNST._STA]> > > > > > > (Node d7f4048c), AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > > > (evregion-0317): No> > > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > > [EmbeddedControl] [20060707]> > > > > > > > [17179572.532000] ACPI Error> > (exfldio-0290):> > > > > > > Region EmbeddedControl(3) has no handler> > > > > > [20060707]> > > > > > > > [17179572.532000] ACPI Exception> > > > (dswexec-0458):> > > > > > > AE_NOT_EXIST, While resolving operands for> > > > > > > [OpcodeName unavailable] [20060707]> > > > > > > > [17179572.532000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__.BRID] (Node> > d7f40900),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__.BRII] (Node> > d7f40914),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > > > > [\_SB_.PCI0.LPC_.EC__.BRPC] (Node> > d7f4093c),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > (psparse-0537):> > > > > > > Method parse/execution failed> > > > [\_SB_.NEST._STA]> > > > > > > (Node d7f40f18), AE_NOT_EXIST> > > > > > > > [17179572.532000] ACPI Error> > (uteval-0212):> > > > > > Method> > > > > > > execution failed [\_SB_.NEST._STA] (Node> > > > > > d7f40f18),> > > > > > > AE_NOT_EXIST> > > > > > > > [17179572.532000] PCI quirk: region> > > > 1000-107f> > > > > > > claimed by ICH4 ACPI/GPIO/TCO> > > > > > > > [17179572.532000] PCI quirk: region> > > > 1180-11bf> > > > > > > claimed by ICH4 GPIO> > > > > > > > [17179572.532000] PCI: Ignoring BAR0-3> > of> > > > IDE> > > > > > > controller 0000:00:1f.1> > > > > > > > [17179572.532000] Boot video device is> > > > > > > 0000:01:00.0> > > > > > > > [17179572.532000] PCI: Transparent> > bridge -> > > > > > > 0000:00:1e.0> > > > > > > > [17179572.532000] ACPI: PCI Interrupt> > > > Routing> > > > > > > Table [\_SB_.PCI0._PRT]> > > > > > > > [17179572.540000] ACPI: Embedded> > Controller> > > > [EC]> > > > > > > (gpe 28) interrupt mode.> > > > > > > > [17179572.540000] ACPI: Power Resource> > > > [PUBS]> > > > > > (on)> > > > > > > > [17179572.540000] ACPI: PCI Interrupt> > > > Routing> > > > > > > Table [\_SB_.PCI0.AGP_._PRT]> > > > > > > > [17179572.544000] ACPI: PCI Interrupt> > > > Routing> > > > > > > Table [\_SB_.PCI0.PCI1._PRT]> > > > > > > > [17179572.548000] Linux Plug and Play> > > > Support> > > > > > > v0.97 (c) Adam Belay> > > > > > > > [17179572.548000] pnp: PnP ACPI init> > > > > > > > [17179572.552000] pnp: PnP ACPI: found> > 13> > > > > > devices> > > > > > > > [17179572.552000] PnPBIOS: Disabled by> > ACPI> > > > PNP> > > > > > > > [17179572.552000] PCI: Using ACPI for> > IRQ> > > > > > routing> > > > > > > > [17179572.552000] PCI: If a device> > doesn't> > > > work,> > > > > > > try "pci=routeirq". If it helps, post a> > > > report> > > > > > > > [17179572.564000] PCI: Bridge:> > 0000:00:01.0> > > > > > > > [17179572.564000] IO window: 3000-3fff> > > > > > > > [17179572.564000] MEM window:> > > > > > c0100000-c01fffff> > > > > > > > [17179572.564000] PREFETCH window:> > > > > > > e0000000-e7ffffff> > > > > > > > [17179572.564000] PCI: Bus 3, cardbus> > > > bridge:> > > > > > > 0000:02:00.0> > > > > > > > [17179572.564000] IO window:> > > > 00004000-000040ff> > > > > > > > [17179572.564000] IO window:> > > > 00004400-000044ff> > > > > > > > [17179572.564000] PREFETCH window:> > > > > > > e8000000-e9ffffff> > > > > > > > [17179572.564000] MEM window:> > > > > > c2000000-c3ffffff> > > > > > > > [17179572.564000] PCI: Bus 7, cardbus> > > > bridge:> > > > > > > 0000:02:00.1> > > > > > > > [17179572.564000] IO window:> > > > 00004800-000048ff> > > > > > > > [17179572.564000] IO window:> > > > 00004c00-00004cff> > > > > > > > [17179572.564000] PREFETCH window:> > > > > > > ea000000-ebffffff> > > > > > > > [17179572.564000] MEM window:> > > > > > c4000000-c5ffffff> > > > > > > > [17179572.564000] PCI: Bridge:> > 0000:00:1e.0> > > > > > > > [17179572.564000] IO window: 4000-8fff> > > > > > > > [17179572.564000] MEM window:> > > > > > c0200000-cfffffff> > > > > > > > [17179572.564000] PREFETCH window:> > > > > > > e8000000-f00fffff> > > > > > > > [17179572.564000] PCI: Setting latency> > timer> > > > of> > > > > > > device 0000:00:1e.0 to 64> > > > > > > > [17179572.564000] ACPI: PCI Interrupt> > Link> > > > > > [LNKA]> > > > > > > enabled at IRQ 11> > > > > > > > [17179572.564000] PCI: setting IRQ 11 as> > > > > > > level-triggered> > > > > > > > [17179572.564000] ACPI: PCI Interrupt> > > > > > > 0000:02:00.0[A] -> Link [LNKA] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179572.564000] ACPI: PCI Interrupt> > Link> > > > > > [LNKB]> > > > > > > enabled at IRQ 11> > > > > > > > [17179572.564000] ACPI: PCI Interrupt> > > > > > > 0000:02:00.1[B] -> Link [LNKB] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179572.564000] NET: Registered> > protocol> > > > > > family> > > > > > > 2> > > > > > > > [17179572.604000] IP route cache hash> > table> > > > > > > entries: 4096 (order: 2, 16384 bytes)> > > > > > > > [17179572.604000] TCP established hash> > table> > > > > > > entries: 16384 (order: 5, 131072 bytes)> > > > > > > > [17179572.604000] TCP bind hash table> > > > entries:> > > > > > > 8192 (order: 4, 65536 bytes)> > > > > > > > [17179572.604000] TCP: Hash tables> > > > configured> > > > > > > (established 16384 bind 8192)> > > > > > > > [17179572.604000] TCP reno registered> > > > > > > > [17179572.604000] Simple Boot Flag at> > 0x35> > > > set> > > > > > to> > > > > > > 0x1> > > > > > > > [17179572.604000] audit: initializing> > > > netlink> > > > > > > socket (disabled)> > > > > > > > [17179572.604000]> > audit(1169829486.604:1):> > > > > > > initialized> > > > > > > > [17179572.604000] VFS: Disk quotas> > > > dquot_6.5.1> > > > > > > > [17179572.604000] Dquot-cache hash table> > > > > > entries:> > > > > > > 1024 (order 0, 4096 bytes)> > > > > > > > [17179572.604000] Initializing> > Cryptographic> > > > API> > > > > > > > [17179572.604000] io scheduler noop> > > > registered> > > > > > > > [17179572.604000] io scheduler> > anticipatory> > > > > > > registered> > > > > > > > [17179572.604000] io scheduler deadline> > > > > > registered> > > > > > > > [17179572.604000] io scheduler cfq> > > > registered> > > > > > > (default)> > > > > > > > [17179572.604000] isapnp: Scanning for> > PnP> > > > > > > cards...> > > > > > > > [17179572.956000] isapnp: No Plug & Play> > > > device> > > > > > > found> > > > > > > > [17179573.000000] Real Time Clock Driver> > > > v1.12ac> > > > > > > > [17179573.000000] Serial: 8250/16550> > driver> > > > > > > $Revision: 1.90 $ 4 ports, IRQ sharing> > enabled> > > > > > > > [17179573.004000] pnp: Device 00:0a> > > > activated.> > > > > > > > [17179573.004000] 00:0a: ttyS0 at I/O> > 0x3f8> > > > (irq> > > > > > => > > > > > > 4) is a NS16550A> > > > > > > > [17179573.004000] PCI: Enabling device> > > > > > > 0000:00:1f.6 (0000 -> 0001)> > > > > > > > [17179573.004000] ACPI: PCI Interrupt> > > > > > > 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179573.004000] ACPI: PCI interrupt> > for> > > > device> > > > > > > 0000:00:1f.6 disabled> > > > > > > > [17179573.004000] mice: PS/2 mouse> > device> > > > common> > > > > > > for all mice> > > > > > > > [17179573.004000] RAMDISK driver> > > > initialized: 16> > > > > > > RAM disks of 65536K size 1024 blocksize> > > > > > > > [17179573.004000] Uniform Multi-Platform> > > > E-IDE> > > > > > > driver Revision: 7.00alpha2> > > > > > > > [17179573.004000] ide: Assuming 33MHz> > system> > > > bus> > > > > > > speed for PIO modes; override with> > idebus=xx> > > > > > > > [17179573.004000] PNP: PS/2 Controller> > > > > > > [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq> > > > 1,12> > > > > > > > [17179573.012000] serio: i8042 AUX port> > at> > > > > > > 0x60,0x64 irq 12> > > > > > > > [17179573.012000] serio: i8042 KBD port> > at> > > > > > > 0x60,0x64 irq 1> > > > > > > > [17179573.012000] EISA: Probing bus 0 at> > > > eisa.0> > > > > > > > [17179573.012000] Cannot allocate> > resource> > > > for> > > > > > > EISA slot 1> > > > > > > > [17179573.012000] Cannot allocate> > resource> > > > for> > > > > > > EISA slot 2> > > > > > > > [17179573.012000] Cannot allocate> > resource> > > > for> > > > > > > EISA slot 3> > > > > > > > [17179573.012000] Cannot allocate> > resource> > > > for> > > > > > > EISA slot 4> > > > > > > > [17179573.012000] Cannot allocate> > resource> > > > for> > > > > > > EISA slot 5> > > > > > > > [17179573.012000] Cannot allocate> > resource> > > > for> > > > > > > EISA slot 6> > > > > > > > [17179573.012000] Cannot allocate> > resource> > > > for> > > > > > > EISA slot 7> > > > > > > > [17179573.012000] Cannot allocate> > resource> > > > for> > > > > > > EISA slot 8> > > > > > > > [17179573.012000] EISA: Detected 0> > cards.> > > > > > > > [17179573.012000] TCP bic registered> > > > > > > > [17179573.012000] NET: Registered> > protocol> > > > > > family> > > > > > > 1> > > > > > > > [17179573.012000] NET: Registered> > protocol> > > > > > family> > > > > > > 8> > > > > > > > [17179573.012000] NET: Registered> > protocol> > > > > > family> > > > > > > 20> > > > > > > > [17179573.012000] Using IPI No-Shortcut> > mode> > > > > > > > [17179573.012000] ACPI: (supports S0 S3> > S4> > > > S5)> > > > > > > > [17179573.016000] Freeing unused kernel> > > > memory:> > > > > > > 308k freed> > > > > > > > [17179573.056000] input: AT Translated> > Set 2> > > > > > > keyboard as /class/input/input0> > > > > > > > [17179574.176000] Capability LSM> > initialized> > > > > > > > [17179574.320000] ACPI: CPU0 (power> > states:> > > > > > C1[C1]> > > > > > > C2[C2] C3[C3])> > > > > > > > [17179574.324000] ACPI: Thermal Zone> > [THM0]> > > > (75> > > > > > C)> > > > > > > > [17179574.804000] ICH3M: IDE controller> > at> > > > PCI> > > > > > > slot 0000:00:1f.1> > > > > > > > [17179574.804000] PCI: Enabling device> > > > > > > 0000:00:1f.1 (0005 -> 0007)> > > > > > > > [17179574.804000] ACPI: PCI Interrupt> > Link> > > > > > [LNKC]> > > > > > > enabled at IRQ 11> > > > > > > > [17179574.804000] ACPI: PCI Interrupt> > > > > > > 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179574.804000] ICH3M: chipset> > revision 1> > > > > > > > [17179574.804000] ICH3M: not 100% native> > > > mode:> > > > > > > will probe irqs later> > > > > > > > [17179574.804000] ide0: BM-DMA at> > > > > > > 0x1860-0x1867, BIOS settings: hda:DMA,> > hdb:pio> > > > > > > > [17179574.804000] ide1: BM-DMA at> > > > > > > 0x1868-0x186f, BIOS settings: hdc:DMA,> > hdd:pio> > > > > > > > [17179574.804000] Probing IDE interface> > > > ide0...> > > > > > > > [17179575.096000] hda: IC25N030ATDA04-0,> > ATA> > > > > > DISK> > > > > > > drive> > > > > > > > [17179575.768000] ide0 at> > 0x1f0-0x1f7,0x3f6> > > > on> > > > > > irq> > > > > > > 14> > > > > > > > [17179575.784000] Probing IDE interface> > > > ide1...> > > > > > > > [17179576.520000] hdc: MATSHITADVD-ROM> > > > SR-8176,> > > > > > > ATAPI CD/DVD-ROM drive> > > > > > > > [17179576.856000] ide1 at> > 0x170-0x177,0x376> > > > on> > > > > > irq> > > > > > > 15> > > > > > > > [17179576.864000] hda: max request size:> > > > 128KiB> > > > > > > > [17179576.880000] hda: 58605120 sectors> > > > (30005> > > > > > MB)> > > > > > > w/1806KiB Cache, CHS=62016/15/63,> > UDMA(100)> > > > > > > > [17179576.880000] hda: cache flushes not> > > > > > supported> > > > > > > > [17179576.880000] hda: hda1 hda2 < hda5> > >> > > > > > > > [17179576.944000] hdc: ATAPI 24X DVD-ROM> > > > drive,> > > > > > > 256kB Cache, UDMA(33)> > > > > > > > [17179576.944000] Uniform CD-ROM driver> > > > > > Revision:> > > > > > > 3.20> > > > > > > > [17179577.256000] usbcore: registered> > new> > > > driver> > > > > > > usbfs> > > > > > > > [17179577.256000] usbcore: registered> > new> > > > driver> > > > > > > hub> > > > > > > > [17179577.304000] USB Universal Host> > > > Controller> > > > > > > Interface driver v3.0> > > > > > > > [17179577.304000] ACPI: PCI Interrupt> > > > > > > 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179577.304000] PCI: Setting latency> > timer> > > > of> > > > > > > device 0000:00:1d.0 to 64> > > > > > > > [17179577.304000] uhci_hcd 0000:00:1d.0:> > > > UHCI> > > > > > Host> > > > > > > Controller> > > > > > > > [17179577.304000] uhci_hcd 0000:00:1d.0:> > new> > > > USB> > > > > > > bus registered, assigned bus number 1> > > > > > > > [17179577.304000] uhci_hcd 0000:00:1d.0:> > irq> > > > 11,> > > > > > > io base 0x00001800> > > > > > > > [17179577.304000] usb usb1:> > configuration #1> > > > > > > chosen from 1 choice> > > > > > > > [17179577.304000] hub 1-0:1.0: USB hub> > found> > > > > > > > [17179577.304000] hub 1-0:1.0: 2 ports> > > > detected> > > > > > > > [17179577.408000] ACPI: PCI Interrupt> > Link> > > > > > [LNKD]> > > > > > > enabled at IRQ 11> > > > > > > > [17179577.408000] ACPI: PCI Interrupt> > > > > > > 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179577.408000] PCI: Setting latency> > timer> > > > of> > > > > > > device 0000:00:1d.1 to 64> > > > > > > > [17179577.408000] uhci_hcd 0000:00:1d.1:> > > > UHCI> > > > > > Host> > > > > > > Controller> > > > > > > > [17179577.408000] uhci_hcd 0000:00:1d.1:> > new> > > > USB> > > > > > > bus registered, assigned bus number 2> > > > > > > > [17179577.408000] uhci_hcd 0000:00:1d.1:> > irq> > > > 11,> > > > > > > io base 0x00001820> > > > > > > > [17179577.408000] usb usb2:> > configuration #1> > > > > > > chosen from 1 choice> > > > > > > > [17179577.408000] hub 2-0:1.0: USB hub> > found> > > > > > > > [17179577.408000] hub 2-0:1.0: 2 ports> > > > detected> > > > > > > > [17179577.512000] ACPI: PCI Interrupt> > > > > > > 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179577.512000] PCI: Setting latency> > timer> > > > of> > > > > > > device 0000:00:1d.2 to 64> > > > > > > > [17179577.512000] uhci_hcd 0000:00:1d.2:> > > > UHCI> > > > > > Host> > > > > > > Controller> > > > > > > > [17179577.512000] uhci_hcd 0000:00:1d.2:> > new> > > > USB> > > > > > > bus registered, assigned bus number 3> > > > > > > > [17179577.512000] uhci_hcd 0000:00:1d.2:> > irq> > > > 11,> > > > > > > io base 0x00001840> > > > > > > > [17179577.512000] usb usb3:> > configuration #1> > > > > > > chosen from 1 choice> > > > > > > > [17179577.512000] hub 3-0:1.0: USB hub> > found> > > > > > > > [17179577.512000] hub 3-0:1.0: 2 ports> > > > detected> > > > > > > > [17179577.704000] Attempting manual> > resume> > > > > > > > [17179577.748000] kjournald starting.> > > > Commit> > > > > > > interval 5 seconds> > > > > > > > [17179577.748000] EXT3-fs: mounted> > > > filesystem> > > > > > with> > > > > > > ordered data mode.> > > > > > > > [17179577.752000] usb 2-2: new full> > speed> > > > USB> > > > > > > device using uhci_hcd and address 2> > > > > > > > [17179577.908000] usb 2-2: configuration> > #1> > > > > > chosen> > > > > > > from 1 choice> > > > > > > > [17179593.968000] pci_hotplug: PCI Hot> > Plug> > > > PCI> > > > > > > Core version: 0.5> > > > > > > > [17179594.312000] Floppy drive(s): fd0> > is> > > > 1.44M> > > > > > > > [17179594.424000] FDC 0 is a National> > > > > > > Semiconductor PC87306> > > > > > > > [17179594.428000] input: PC Speaker as> > > > > > > /class/input/input1> > > > > > > > [17179594.460000] shpchp: Standard Hot> > Plug> > > > PCI> > > > > > > Controller Driver version: 0.4> > > > > > > > [17179594.476000] parport: PnPBIOS> > parport> > > > > > > detected.> > > > > > > > [17179594.476000] parport0: PC-style at> > > > 0x3bc,> > > > > > irq> > > > > > > 7 [PCSPP,TRISTATE]> > > > > > > > [17179594.548000] Linux agpgart> > interface> > > > v0.101> > > > > > > (c) Dave Jones> > > > > > > > [17179594.736000] agpgart: Detected an> > Intel> > > > > > 830M> > > > > > > Chipset.> > > > > > > > [17179594.752000] agpgart: AGP aperture> > is> > > > 256M> > > > > > @> > > > > > > 0xd0000000> > > > > > > > [17179594.860000] irda_init()> > > > > > > > [17179594.860000] NET: Registered> > protocol> > > > > > family> > > > > > > 23> > > > > > > > [17179594.932000]> > drivers/usb/class/usblp.c:> > > > > > > usblp0: USB Bidirectional printer dev 2 if> > 1> > > > alt 0> > > > > > > proto 2 vid 0x04B8 pid 0x0820> > > > > > > > [17179594.932000] usbcore: registered> > new> > > > driver> > > > > > > usblp> > > > > > > > [17179594.932000]> > drivers/usb/class/usblp.c:> > > > > > > v0.13: USB Printer Device Class driver> > > > > > > > [17179595.056000] PCI: Enabling device> > > > > > > 0000:00:1f.5 (0000 -> 0001)> > > > > > > > [17179595.056000] ACPI: PCI Interrupt> > > > > > > 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179595.056000] PCI: Setting latency> > timer> > > > of> > > > > > > device 0000:00:1f.5 to 64> > > > > > > > [17179595.108000] hw_random: RNG not> > > > detected> > > > > > > > [17179595.148000] IBM TrackPoint> > firmware:> > > > 0x0e,> > > > > > > buttons: 3/3> > > > > > > > [17179595.164000] input: TPPS/2 IBM> > > > TrackPoint> > > > > > as> > > > > > > /class/input/input2> > > > > > > > [17179595.372000] pnp: Device 00:0c> > > > activated.> > > > > > > > [17179595.372000] nsc_ircc_pnp_probe() :> > > > From> > > > > > PnP,> > > > > > > found firbase 0x2F8 ; irq 3 ; dma 1.> > > > > > > > [17179595.372000] nsc-ircc, chip->init> > > > > > > > [17179595.372000] nsc-ircc, Found chip> > at> > > > > > > base=0x02e> > > > > > > > [17179595.372000] nsc-ircc, driver> > loaded> > > > (Dag> > > > > > > Brattli)> > > > > > > > [17179595.372000] IrDA: Registered> > device> > > > irda0> > > > > > > > [17179595.372000] nsc-ircc, Using> > dongle:> > > > > > > IBM31T1100 or Temic TFDS6000/TFDS6500> > > > > > > > [17179595.912000] hsfengine: module> > license> > > > 'see> > > > > > > LICENSE file distributed with driver'> > taints> > > > > > kernel.> > > > > > > > [17179596.036000] ts: Compaq touchscreen> > > > > > protocol> > > > > > > output> > > > > > > > [17179596.284000]> > > > intel8x0_measure_ac97_clock:> > > > > > > measured 55501 usecs> > > > > > > > [17179596.284000] intel8x0: clocking to> > > > 48000> > > > > > > > [17179596.284000] ACPI: PCI Interrupt> > > > > > > 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179596.608000] orinoco 0.15rc3 (David> > > > Gibson> > > > > > > <hermes@xxxxxxxxxxxxxxxxxxxxx>, Pavel> > Roskin> > > > > > > <proski@xxxxxxx>, et al)> > > > > > > > [17179596.612000] orinoco_pci 0.15rc3> > (Pavel> > > > > > > Roskin <proski@xxxxxxx>, David Gibson> > > > > > > <hermes@xxxxxxxxxxxxxxxxxxxxx> & Jean> > > > Tourrilhes> > > > > > > <jt@xxxxxxxxxx>)> > > > > > > > [17179596.872000] e100: Intel(R) PRO/100> > > > Network> > > > > > > Driver, 3.5.10-k2-NAPI> > > > > > > > [17179596.872000] e100: Copyright(c)> > > > 1999-2005> > > > > > > Intel Corporation> > > > > > > > [17179597.284000] PCI: Setting latency> > timer> > > > of> > > > > > > device 0000:00:1f.6 to 64> > > > > > > > [17179597.284000] HSF: ERROR: SILICON> > > > > > Laboratories> > > > > > > or LUCENT AC97 modem detected!<3>> > > > > > > > [17179597.284000] HSF: ERROR: This> > driver> > > > only> > > > > > > supports CONEXANT devices<3>> > > > > > > > [17179597.284000] HSF: ERROR: not a> > Conexant> > > > > > > modem<3>> > > > > > > > [17179597.332000]> > cnxthsf_cnxt_serial_add:> > > > > > > ComCtrlOpen failed (1)> > > > > > > > [17179597.332000] ACPI: PCI interrupt> > for> > > > device> > > > > > > 0000:00:1f.6 disabled> > > > > > > > [17179597.332000] hsfich: probe of> > > > 0000:00:1f.6> > > > > > > failed with error -5> > > > > > > > [17179597.332000] ACPI: PCI Interrupt> > > > > > > 0000:02:00.0[A] -> Link [LNKA] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179597.332000] Yenta: CardBus bridge> > > > found at> > > > > > > 0000:02:00.0 [1014:0185]> > > > > > > > [17179597.460000] Yenta: ISA IRQ mask> > > > 0x0438,> > > > > > PCI> > > > > > > irq 11> > > > > > > > [17179597.460000] Socket status:> > 30000006> > > > > > > > [17179597.460000] pcmcia: parent PCI> > bridge> > > > I/O> > > > > > > window: 0x4000 - 0x8fff> > > > > > > > [17179597.460000] cs: IO port probe> > > > > > 0x4000-0x8fff:> > > > > > > clean.> > > > > > > > [17179597.460000] pcmcia: parent PCI> > bridge> > > > > > Memory> > > > > > > window: 0xc0200000 - 0xcfffffff> > > > > > > > [17179597.460000] pcmcia: parent PCI> > bridge> > > > > > Memory> > > > > > > window: 0xe8000000 - 0xf00fffff> > > > > > > > [17179597.460000] ACPI: PCI Interrupt> > > > > > > 0000:02:00.1[B] -> Link [LNKB] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179597.460000] Yenta: CardBus bridge> > > > found at> > > > > > > 0000:02:00.1 [1014:0185]> > > > > > > > [17179597.588000] Yenta: ISA IRQ mask> > > > 0x0438,> > > > > > PCI> > > > > > > irq 11> > > > > > > > [17179597.588000] Socket status:> > 30000006> > > > > > > > [17179597.588000] pcmcia: parent PCI> > bridge> > > > I/O> > > > > > > window: 0x4000 - 0x8fff> > > > > > > > [17179597.588000] cs: IO port probe> > > > > > 0x4000-0x8fff:> > > > > > > clean.> > > > > > > > [17179597.588000] pcmcia: parent PCI> > bridge> > > > > > Memory> > > > > > > window: 0xc0200000 - 0xcfffffff> > > > > > > > [17179597.588000] pcmcia: parent PCI> > bridge> > > > > > Memory> > > > > > > window: 0xe8000000 - 0xf00fffff> > > > > > > > [17179597.596000] ACPI: PCI Interrupt> > > > > > > 0000:02:02.0[A] -> Link [LNKC] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179597.596000] orinoco_pci: Detected> > > > device> > > > > > > 0000:02:02.0, mem:0xf0000000-0xf0000fff,> > irq> > > > 11> > > > > > > > [17179598.552000] eth0: Hardware> > identity> > > > > > > 8013:0000:0001:0000> > > > > > > > [17179598.552000] eth0: Station identity> > > > > > > 001f:0006:0001:0003> > > > > > > > [17179598.552000] eth0: Firmware> > determined> > > > as> > > > > > > Intersil 1.3.6> > > > > > > > [17179598.552000] eth0: Ad-hoc demo mode> > > > > > supported> > > > > > > > [17179598.552000] eth0: IEEE standard> > IBSS> > > > > > ad-hoc> > > > > > > mode supported> > > > > > > > [17179598.552000] eth0: WEP supported,> > > > 104-bit> > > > > > key> > > > > > > > [17179598.552000] eth0: MAC address> > > > > > > 00:20:E0:8B:29:93> > > > > > > > [17179598.552000] eth0: Station name> > "Prism> > > > I"> > > > > > > > [17179598.552000] eth0: ready> > > > > > > > [17179598.568000] ACPI: PCI Interrupt> > Link> > > > > > [LNKE]> > > > > > > enabled at IRQ 11> > > > > > > > [17179598.568000] ACPI: PCI Interrupt> > > > > > > 0000:02:08.0[A] -> Link [LNKE] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179598.592000] e100: eth1:> > e100_probe:> > > > addr> > > > > > > 0xc0200000, irq 11, MAC addr> > 00:D0:59:AB:9D:13> > > > > > > > [17179598.620000] prism2pci_init:> > > > prism2_pci.o:> > > > > > > 0.2.5 Loaded> > > > > > > > [17179598.704000] ieee80211_crypt:> > > > registered> > > > > > > algorithm 'NULL'> > > > > > > > [17179598.736000] hostap_pci:> > 0.4.4-kernel> > > > > > (Jouni> > > > > > > Malinen <jkmaline@xxxxxxxxx>)> > > > > > > > [17179599.220000] eth2: New link status:> > > > > > Connected> > > > > > > (0001)> > > > > > > > [17179599.272000] cs: IO port probe> > > > 0x100-0x3af:> > > > > > > clean.> > > > > > > > [17179599.272000] cs: IO port probe> > > > 0x3e0-0x4ff:> > > > > > > excluding 0x4d0-0x4d7> > > > > > > > [17179599.272000] cs: IO port probe> > > > 0x820-0x8ff:> > > > > > > clean.> > > > > > > > [17179599.272000] cs: IO port probe> > > > 0xc00-0xcf7:> > > > > > > clean.> > > > > > > > [17179599.272000] cs: IO port probe> > > > 0xa00-0xaff:> > > > > > > clean.> > > > > > > > [17179599.272000] cs: IO port probe> > > > 0x100-0x3af:> > > > > > > clean.> > > > > > > > [17179599.276000] cs: IO port probe> > > > 0x3e0-0x4ff:> > > > > > > excluding 0x4d0-0x4d7> > > > > > > > [17179599.276000] cs: IO port probe> > > > 0x820-0x8ff:> > > > > > > clean.> > > > > > > > [17179599.276000] cs: IO port probe> > > > 0xc00-0xcf7:> > > > > > > clean.> > > > > > > > [17179599.276000] cs: IO port probe> > > > 0xa00-0xaff:> > > > > > > clean.> > > > > > > > [17179599.400000] lp0: using parport0> > > > > > > (interrupt-driven).> > > > > > > > [17179599.440000] Adding 1132540k swap> > on> > > > > > >> > > > > >> > > > >> > > >> > >> >> /dev/disk/by-uuid/2b4f1f3d-2b57-45be-abb0-863de010df71.> > > > > > > Priority:-1 extents:1 across:1132540k> > > > > > > > [17179599.516000] EXT3 FS on hda1,> > internal> > > > > > > journal> > > > > > > > [17179599.968000] NET: Registered> > protocol> > > > > > family> > > > > > > 17> > > > > > > > [17179606.328000] NET: Registered> > protocol> > > > > > family> > > > > > > 10> > > > > > > > [17179606.332000] lo: Disabled Privacy> > > > > > Extensions> > > > > > > > [17179606.332000] ADDRCONF(NETDEV_UP):> > eth0:> > > > > > link> > > > > > > is not ready> > > > > > > > [17179606.332000] IPv6 over IPv4> > tunneling> > > > > > driver> > > > > > > > [17179606.868000] ACPI: AC Adapter [AC]> > > > > > (on-line)> > > > > > > > [17179606.944000] ACPI: Battery Slot> > [BAT0]> > > > > > > (battery present)> > > > > > > > [17179606.972000] ACPI: Power Button> > (FF)> > > > [PWRF]> > > > > > > > [17179606.972000] ACPI: Lid Switch [LID]> > > > > > > > [17179606.972000] ACPI: Sleep Button> > (CM)> > > > [SLPB]> > > > > > > > [17179607.080000] ACPI: ACPI Dock> > Station> > > > Driver> > > > > > > > [17179607.196000] ibm_acpi: IBM ThinkPad> > > > ACPI> > > > > > > Extras v0.12a> > > > > > > > [17179607.196000] ibm_acpi:> > > > > > > http://ibm-acpi.sf.net/> > > > > > > > [17179607.228000] pcc_acpi: loading...> > > > > > > > [17179607.420000] ACPI: Video Device> > [VID]> > > > > > > (multi-head: yes rom: no post: no)> > > > > > > > [17179616.584000] eth2: no IPv6 routers> > > > present> > > > > > > > [17179621.900000] [drm] Initialized drm> > > > 1.0.1> > > > > > > 20051102> > > > > > > > [17179621.928000] ACPI: PCI Interrupt> > > > > > > 0000:01:00.0[A] -> Link [LNKA] -> GSI 11> > > > (level,> > > > > > > low) -> IRQ 11> > > > > > > > [17179621.932000] [drm] Initialized> > radeon> > > > > > 1.25.0> > > > > > > 20060524 on minor 0> > > > > > > > [17179622.764000] IBM machine detected.> > > > Enabling> > > > > > > interrupts during APM calls.> > > > > > > > [17179622.764000] apm: BIOS version 1.2> > > > Flags> > > > > > 0x03> > > > > > > (Driver version 1.16ac)> > > > > > > > [17179622.764000] apm: overridden by> > ACPI.> > > > > > > > [17179623.400000] mtrr:> > 0xe0000000,0x8000000> > > > > > > overlaps existing 0xe0000000,0x1000000> > > > > > > > [17179623.400000] mtrr:> > 0xe0000000,0x8000000> > > > > > > overlaps existing 0xe0000000,0x1000000> > > > > > > > [17179623.400000] mtrr:> > 0xe0000000,0x8000000> > > > > > > overlaps existing 0xe0000000,0x1000000> > > > > > > > [17179623.400000] agpgart: Found an AGP> > 2.0> > > > > > > compliant device at 0000:00:00.0.> > > > > > > > [17179623.400000] agpgart: Putting AGP> > V2> > > > device> > > > > > > at 0000:00:00.0 into 1x mode> > > > > > > > [17179623.400000] agpgart: Putting AGP> > V2> > > > device> > > > > > > at 0000:01:00.0 into 1x mode> > > > > > > > [17179623.680000] [drm] Setting GART> > > > location> > > > > > > based on new memory map> > > > > > > > [17179623.680000] [drm] writeback test> > > > succeeded> > > > > > > in 1 usecs> > > > > > > > [17179629.400000] Non-volatile memory> > driver> > > > > > v1.2> > > > > > > > [17179629.664000] input:> > > > /usr/sbin/thinkpad-keys> > > > > > > as /class/input/input3> > > > > > > > [17179630.020000] Bluetooth: Core ver> > 2.8> > > > > > > > [17179630.020000] NET: Registered> > protocol> > > > > > family> > > > > > > 31> > > > > > > > [17179630.020000] Bluetooth: HCI device> > and> > > > > > > connection manager initialized> > > > > > > > [17179630.020000] Bluetooth: HCI socket> > > > layer> > > > > > > initialized> > > > > > > > [17179630.088000] Bluetooth: L2CAP ver> > 2.8> > > > > > > > [17179630.088000] Bluetooth: L2CAP> > socket> > > > layer> > > > > > > initialized> > > > > > > > [17179630.148000] Bluetooth: RFCOMM> > socket> > > > layer> > > > > > > initialized> > > > > > > > [17179630.148000] Bluetooth: RFCOMM TTY> > > > layer> > > > > > > initialized> > > > > > > > [17179630.148000] Bluetooth: RFCOMM ver> > 1.7> > > > > > > > [17179712.912000] codec_semaphore:> > semaphore> > > > is> > > > > > > not ready [0x1][0x300300]> > > > > > > > [17179712.912000] codec_read 0:> > semaphore is> > > > not> > > > > > > ready for register 0x56> > > > > > > > [17179712.920000] codec_semaphore:> > semaphore> > > > is> > > > > > > not ready [0x1][0x300300]> > > > > > > > [17179712.920000] codec_read 0:> > semaphore is> > > > not> > > > > > > ready for register 0x56> > > > > > > > [17179818.384000] codec_semaphore:> > semaphore> > > > is> > > > > > > not ready [0x1][0x300300]> > > > > > > > [17179818.384000] codec_read 0:> > semaphore is> > > > not> > > > > > > ready for register 0x56> > > > > > > > [17179818.392000] codec_semaphore:> > semaphore> > > > is> > > > > > > not ready [0x1][0x300300]> > > > > > > > [17179818.392000] codec_read 0:> > semaphore is> > > > not> > > > > > > ready for register 0x56> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > >> > > >> > >> >> ____________________________________________________________________________________> > > > > > 8:00? 8:25? 8:40? Find a flick in no time> > > > > > with the Yahoo! Search movie showtime> > shortcut.> > > > > >> > http://tools.search.yahoo.com/shortcuts/#news>> > > > > CPU0> > > > > > 0: 320188 XT-PIC timer> > > > > > 1: 490 XT-PIC i8042> > > > > > 2: 0 XT-PIC cascade> > > > > > 4: 5 XT-PIC serial> > > > > > 7: 0 XT-PIC parport0> > > > > > 8: 3 XT-PIC rtc> > > > > > 9: 2703 XT-PIC acpi> > > > > > 11: 285770 XT-PIC> > uhci_hcd:usb1,> > > > > > uhci_hcd:usb2, uhci_hcd:usb3, Intel> > > > 82801CA-ICH3,> > > > > > yenta, yenta, eth2, Intel 82801CA-ICH3> > Modem,> > > > > > radeon@pci:0000:01:00.0> > > > > > 12: 56840 XT-PIC i8042> > > > > > 14: 8077 XT-PIC ide0> > > > > > 15: 11209 XT-PIC ide1> > > > > > NMI: 0> > > > > > LOC: 0> > > > > > ERR: 0> > > > > > MIS: 0> > > > > >> > > > > > [17179569.184000] Linux version> > > > 2.6.17-10-generic> > > > > > (root@terranova) (gcc version 4.1.2 20060928> > > > > > (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2> > SMP> > > > Tue> > > > > > Dec 5 22:28:26 UTC 2006 (Ubuntu> > > > > > 2.6.17-10.34-generic)> > > > > > [17179569.184000] BIOS-provided physical RAM> > > > map:> > > > > > [17179569.184000] BIOS-e820:> > 0000000000000000 -> > > > > > 000000000009f000 (usable)> > > > > > [17179569.184000] BIOS-e820:> > 000000000009f000 -> > > > > > 00000000000a0000 (reserved)> > > > > > [17179569.184000] BIOS-e820:> > 00000000000dc000 -> > > > > > 0000000000100000 (reserved)> > > > > > [17179569.184000] BIOS-e820:> > 0000000000100000 -> > > > > > 0000000017f60000 (usable)> > > > > > [17179569.184000] BIOS-e820:> > 0000000017f60000 -> > > > > > 0000000017f7a000 (ACPI data)> > > > > > [17179569.184000] BIOS-e820:> > 0000000017f7a000 -> > > > > > 0000000017f7c000 (ACPI NVS)> > > > > > [17179569.184000] BIOS-e820:> > 0000000017f7c000 -> > > > > > 0000000018000000 (reserved)> > > > > > [17179569.184000] BIOS-e820:> > 00000000ff800000 -> > > > > > 0000000100000000 (reserved)> > > > > > [17179569.184000] 0MB HIGHMEM available.> > > > > > [17179569.184000] 383MB LOWMEM available.> > > > > > [17179569.184000] On node 0 totalpages:> > 98144> > > > > > [17179569.184000] DMA zone: 4096 pages,> > LIFO> > > > > > batch:0> > > > > > [17179569.184000] Normal zone: 94048> > pages,> > > > LIFO> > > > > > batch:31> > > > > > [17179569.184000] DMI present.> > > > > > [17179569.184000] ACPI: RSDP (v002 IBM> > > > > > ) @ 0x000f73b0> > > > > > [17179569.184000] ACPI: XSDT (v001 IBM> > TP-1E> > > > > > 0x00001061 LTP 0x00000000) @ 0x17f6f1e3> > > > > > [17179569.184000] ACPI: FADT (v001 IBM> > TP-1E> > > > > > 0x00001061 IBM 0x00000001) @ 0x17f6f227> > > > > > [17179569.184000] ACPI: SSDT (v001 IBM> > TP-1E> > > > > > 0x00001061 MSFT 0x0100000d) @ 0x17f6f2db> > > > > > [17179569.184000] ACPI: ECDT (v001 IBM> > TP-1E> > > > > > 0x00001061 IBM 0x00000001) @ 0x17f79f87> > > > > > [17179569.184000] ACPI: BOOT (v001 IBM> > TP-1E> > > > > > 0x00001061 LTP 0x00000001) @ 0x17f79fd8> > > > > > [17179569.184000] ACPI: DSDT (v001 IBM> > TP-1E> > > > > > 0x00001061 MSFT 0x0100000d) @ 0x00000000> > > > > > [17179569.184000] ACPI: PM-Timer IO Port:> > 0x1008> > > > > > [17179569.184000] Allocating PCI resources> > > > starting> > > > > > at 20000000 (gap: 18000000:e7800000)> > > > > > [17179569.184000] Built 1 zonelists> > > > > > [17179569.184000] Kernel command line:> > > > > > root=/dev/hda1 ro quiet splash> > > > > > [17179569.184000] Local APIC disabled by> > BIOS> > > > (or by> > > > > > default) -- you can enable it with "lapic"> > > > > > [17179569.184000] mapped APIC to ffffd000> > > > (0130a000)> > > > > > [17179569.184000] Enabling fast FPU save and> > > > > > restore... done.> > > > > > [17179569.184000] Enabling unmasked SIMD FPU> > > > > > exception support... done.> > > > > > [17179569.184000] Initializing CPU#0> > > > > > [17179569.184000] PID hash table entries:> > 2048> > > > > > (order: 11, 8192 bytes)> > > > > > [17179569.184000] Detected 1132.511 MHz> > > > processor.> > > > > > [17179569.184000] Using pmtmr for high-res> > > > > > timesource> > > > > > [17179569.184000] Console: colour VGA+ 80x25> > > > > > [17179571.360000] Dentry cache hash table> > > > entries:> > > > > > 65536 (order: 6, 262144 bytes)> > > > > > [17179571.360000] Inode-cache hash table> > > > entries:> > > > > > 32768 (order: 5, 131072 bytes)> > > > > > [17179571.384000] Memory: 379368k/392576k> > > > available> > > > > > (1910k kernel code, 12576k reserved, 1069k> > data,> > > > > > 308k init, 0k highmem)> > > > > > [17179571.384000] Checking if this processor> > > > honours> > > > > > the WP bit even in supervisor mode... Ok.> > > > > > [17179571.464000] Calibrating delay using> > timer> > > > > > specific routine.. 2267.01 BogoMIPS> > > > (lpj=4534039)> > > > > > [17179571.464000] Security Framework v1.0.0> > > > > > initialized> > > > > > [17179571.464000] SELinux: Disabled at> > boot.> > > > > > [17179571.464000] Mount-cache hash table> > > > entries:> > > > > > 512> > > > > > [17179571.464000] CPU: After generic> > identify,> > > > caps:> > > > > > 0383f9ff 00000000 00000000 00000000 00000000> > > > > > 00000000 00000000> > > > > > [17179571.464000] CPU: After vendor> > identify,> > > > caps:> > > > > > 0383f9ff 00000000 00000000 00000000 00000000> > > > > > 00000000 00000000> > > > > > [17179571.464000] CPU: L1 I cache: 16K, L1 D> > > > cache:> > > > > > 16K> > > > > > [17179571.464000] CPU: L2 cache: 512K> > > > > > [17179571.464000] CPU: After all inits,> > caps:> > > > > > 0383f9ff 00000000 00000000 00000040 00000000> > > > > > 00000000 00000000> > > > > > [17179571.464000] Checking 'hlt'> > instruction...> > > > OK.> > > > > > [17179571.480000] SMP alternatives:> > switching to> > > > UP> > > > > > code> > > > > > [17179571.480000] Freeing SMP alternatives:> > 16k> > > > > > freed> > > > > > [17179571.480000] checking if image is> > > > initramfs...> > > > > > it is> > > > > > [17179572.288000] Freeing initrd memory:> > 5322k> > > > freed> > > > > > [17179572.288000] ACPI: Core revision> > 20060707> > > > > > [17179572.288000] ACPI: Looking for DSDT ...> > not> > > > > > found!> > > > > > [17179572.296000] ACPI: setting ELCR to 0200> > > > (from> > > > > > 0800)> > > > > > [17179572.308000] CPU0: Intel(R) Pentium(R)> > III> > > > > > Mobile CPU 1133MHz stepping 01> > > > > > [17179572.308000] SMP motherboard not> > detected.> > > > > > [17179572.308000] Local APIC not detected.> > Using> > > > > > dummy APIC emulation.> > > > > > [17179572.308000] Brought up 1 CPUs> > > > > > [17179572.308000] migration_cost=0> > > > > > [17179572.308000] NET: Registered protocol> > > > family 16> > > > > > [17179572.308000] EISA bus registered> > > > > > [17179572.308000] ACPI: bus type pci> > registered> > > > > > [17179572.308000] PCI: PCI BIOS revision> > 2.10> > > > entry> > > > > > at 0xfd8fe, last bus=8> > > > > > [17179572.308000] PCI: Using configuration> > type> > > > 1> > > > > > [17179572.308000] Setting up standard PCI> > > > resources> > > > > > [17179572.312000] ACPI: Found ECDT> > > > > > [17179572.312000] ACPI: Could not use ECDT> > > > > > [17179572.320000] ACPI Error> > (evregion-0317): No> > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > [EmbeddedControl] [20060707]> > > > > > [17179572.320000] ACPI Error (exfldio-0290):> > > > Region> > > > > > EmbeddedControl(3) has no handler [20060707]> > > > > > [17179572.320000] ACPI Exception> > (dswexec-0458):> > > > > > AE_NOT_EXIST, While resolving operands for> > > > > > [OpcodeName unavailable] [20060707]> > > > > > [17179572.320000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > [\_SB_.PCI0.LPC_.FDC_._INI]> > > > > > (Node d7f40770), AE_NOT_EXIST> > > > > > [17179572.320000] ACPI Error> > (evregion-0317): No> > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > [EmbeddedControl] [20060707]> > > > > > [17179572.320000] ACPI Error (exfldio-0290):> > > > Region> > > > > > EmbeddedControl(3) has no handler [20060707]> > > > > > [17179572.320000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > [\_SB_.PCI0.LPC_.EC__._INI]> > > > > > (Node d7f44bd0), AE_NOT_EXIST> > > > > > [17179572.324000] ACPI: Interpreter enabled> > > > > > [17179572.324000] ACPI: Using PIC for> > interrupt> > > > > > routing> > > > > > [17179572.324000] ACPI: PCI Interrupt Link> > > > [LNKA]> > > > > > (IRQs 3 4 5 6 7 9 10 *11)> > > > > > [17179572.324000] ACPI: PCI Interrupt Link> > > > [LNKB]> > > > > > (IRQs 3 4 5 6 7 9 10 *11)> > > > > > [17179572.324000] ACPI: PCI Interrupt Link> > > > [LNKC]> > > > > > (IRQs 3 4 5 6 7 9 10 *11)> > > > > > [17179572.328000] ACPI: PCI Interrupt Link> > > > [LNKD]> > > > > > (IRQs 3 4 5 6 7 9 10 *11)> > > > > > [17179572.328000] ACPI: PCI Interrupt Link> > > > [LNKE]> > > > > > (IRQs 3 4 5 6 7 9 10 *11)> > > > > > [17179572.328000] ACPI: PCI Interrupt Link> > > > [LNKF]> > > > > > (IRQs 3 4 5 6 7 9 10 11) *0, disabled.> > > > > > [17179572.328000] ACPI: PCI Interrupt Link> > > > [LNKG]> > > > > > (IRQs 3 4 5 6 7 9 10 11) *0, disabled.> > > > > > [17179572.328000] ACPI: PCI Interrupt Link> > > > [LNKH]> > > > > > (IRQs 3 4 5 6 7 9 10 11) *0, disabled.> > > > > > [17179572.332000] ACPI: PCI Root Bridge> > [PCI0]> > > > > > (0000:00)> > > > > > [17179572.332000] PCI: Probing PCI hardware> > (bus> > > > 00)> > > > > > [17179572.332000] ACPI Error> > (evregion-0317): No> > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > [EmbeddedControl] [20060707]> > > > > > [17179572.332000] ACPI Error (exfldio-0290):> > > > Region> > > > > > EmbeddedControl(3) has no handler [20060707]> > > > > > [17179572.332000] ACPI Exception> > (dswexec-0458):> > > > > > AE_NOT_EXIST, While resolving operands for> > > > > > [OpcodeName unavailable] [20060707]> > > > > > [17179572.332000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > > > [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node> > > > d7f44f68),> > > > > > AE_NOT_EXIST> > > > > > [17179572.332000] ACPI Error (uteval-0212):> > > > Method> > > > > > execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BAT0._STA]> > > > > > (Node d7f44f68), AE_NOT_EXIST> > > > > > [17179572.332000] ACPI Error> > (evregion-0317): No> > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > [EmbeddedControl] [20060707]> > > > > > [17179572.332000] ACPI Error (exfldio-0290):> > > > Region> > > > > > EmbeddedControl(3) has no handler [20060707]> > > > > > [17179572.332000] ACPI Exception> > (dswexec-0458):> > > > > > AE_NOT_EXIST, While resolving operands for> > > > > > [OpcodeName unavailable] [20060707]> > > > > > [17179572.332000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > > > [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node> > > > d7f44e78),> > > > > > AE_NOT_EXIST> > > > > > [17179572.332000] ACPI Error (uteval-0212):> > > > Method> > > > > > execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BAT1._STA]> > > > > > (Node d7f44e78), AE_NOT_EXIST> > > > > > [17179572.332000] ACPI Error> > (evregion-0317): No> > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > [EmbeddedControl] [20060707]> > > > > > [17179572.332000] ACPI Error (exfldio-0290):> > > > Region> > > > > > EmbeddedControl(3) has no handler [20060707]> > > > > > [17179572.332000] ACPI Exception> > (dswexec-0458):> > > > > > AE_NOT_EXIST, While resolving operands for> > > > > > [OpcodeName unavailable] [20060707]> > > > > > [17179572.332000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BLID]> > > > > > (Node d7f40a68), AE_NOT_EXIST> > > > > > [17179572.332000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BLII]> > > > > > (Node d7f40a7c), AE_NOT_EXIST> > > > > > [17179572.332000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BLPC]> > > > > > (Node d7f40aa4), AE_NOT_EXIST> > > > > > [17179572.332000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > > > [\_SB_.PCI0.IDE0.PRIM.SLAV._STA] (Node> > > > d7f407d4),> > > > > > AE_NOT_EXIST> > > > > > [17179572.332000] ACPI Error (uteval-0212):> > > > Method> > > > > > execution failed> > > > [\_SB_.PCI0.IDE0.PRIM.SLAV._STA]> > > > > > (Node d7f407d4), AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error> > (evregion-0317): No> > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > [EmbeddedControl] [20060707]> > > > > > [17179572.336000] ACPI Error (exfldio-0290):> > > > Region> > > > > > EmbeddedControl(3) has no handler [20060707]> > > > > > [17179572.336000] ACPI Exception> > (dswexec-0458):> > > > > > AE_NOT_EXIST, While resolving operands for> > > > > > [OpcodeName unavailable] [20060707]> > > > > > [17179572.336000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BRID]> > > > > > (Node d7f40900), AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BRII]> > > > > > (Node d7f40914), AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BRPC]> > > > > > (Node d7f4093c), AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > > > [\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node> > > > d7f407ac),> > > > > > AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error (uteval-0212):> > > > Method> > > > > > execution failed> > > > [\_SB_.PCI0.IDE0.SCND.MSTR._STA]> > > > > > (Node d7f407ac), AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error> > (evregion-0317): No> > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > [EmbeddedControl] [20060707]> > > > > > [17179572.336000] ACPI Error (exfldio-0290):> > > > Region> > > > > > EmbeddedControl(3) has no handler [20060707]> > > > > > [17179572.336000] ACPI Exception> > (dswexec-0458):> > > > > > AE_NOT_EXIST, While resolving operands for> > > > > > [OpcodeName unavailable] [20060707]> > > > > > [17179572.336000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BLID]> > > > > > (Node d7f40a68), AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BLII]> > > > > > (Node d7f40a7c), AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BLPC]> > > > > > (Node d7f40aa4), AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BSTA]> > > > > > (Node d7f40be4), AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > > > [\_SB_.PCI0.USB0.URTH.UNST._STA] (Node> > > > d7f4048c),> > > > > > AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error (uteval-0212):> > > > Method> > > > > > execution failed> > > > [\_SB_.PCI0.USB0.URTH.UNST._STA]> > > > > > (Node d7f4048c), AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error> > (evregion-0317): No> > > > > > handler for Region [ECOR] (d7f4c754)> > > > > > [EmbeddedControl] [20060707]> > > > > > [17179572.336000] ACPI Error (exfldio-0290):> > > > Region> > > > > > EmbeddedControl(3) has no handler [20060707]> > > > > > [17179572.336000] ACPI Exception> > (dswexec-0458):> > > > > > AE_NOT_EXIST, While resolving operands for> > > > > > [OpcodeName unavailable] [20060707]> > > > > > [17179572.336000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BRID]> > > > > > (Node d7f40900), AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BRII]> > > > > > (Node d7f40914), AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed> > > > [\_SB_.PCI0.LPC_.EC__.BRPC]> > > > > > (Node d7f4093c), AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error (psparse-0537):> > > > Method> > > > > > parse/execution failed [\_SB_.NEST._STA]> > (Node> > > > > > d7f40f18), AE_NOT_EXIST> > > > > > [17179572.336000] ACPI Error (uteval-0212):> > > > Method> > > > > > execution failed [\_SB_.NEST._STA] (Node> > > > d7f40f18),> > > > > > AE_NOT_EXIST> > > > > > [17179572.336000] PCI quirk: region> > 1000-107f> > > > > > claimed by ICH4 ACPI/GPIO/TCO> > > > > > [17179572.336000] PCI quirk: region> > 1180-11bf> > > > > > claimed by ICH4 GPIO> > > > > > [17179572.336000] PCI: Ignoring BAR0-3 of> > IDE> > > > > > controller 0000:00:1f.1> > > > > > [17179572.336000] Boot video device is> > > > 0000:01:00.0> > > > > > [17179572.336000] PCI: Transparent bridge -> > > > > > 0000:00:1e.0> > > > > > [17179572.336000] ACPI: PCI Interrupt> > Routing> > > > Table> > > > > > [\_SB_.PCI0._PRT]> > > > > > [17179572.344000] ACPI: Embedded Controller> > [EC]> > > > > > (gpe 28) interrupt mode.> > > > > > [17179572.344000] ACPI: Power Resource> > [PUBS]> > > > (on)> > > > > > [17179572.344000] ACPI: PCI Interrupt> > Routing> > > > Table> > > > > > [\_SB_.PCI0.AGP_._PRT]> > > > > > [17179572.348000] ACPI: PCI Interrupt> > Routing> > > > Table> > > > > > [\_SB_.PCI0.PCI1._PRT]> > > > > > [17179572.352000] Linux Plug and Play> > Support> > > > v0.97> > > > > > (c) Adam Belay> > > > > > [17179572.352000] pnp: PnP ACPI init> > > > > > [17179572.356000] pnp: PnP ACPI: found 13> > > > devices> > > > > > [17179572.356000] PnPBIOS: Disabled by ACPI> > PNP> > > > > > [17179572.356000] PCI: Using ACPI for IRQ> > > > routing> > > > > > [17179572.356000] PCI: If a device doesn't> > work,> > > > try> > > > > > "pci=routeirq". If it helps, post a report> > > > > > [17179572.368000] PCI: Bridge: 0000:00:01.0> > > > > > [17179572.368000] IO window: 3000-3fff> > > > > > [17179572.368000] MEM window:> > > > c0100000-c01fffff> > > > > > [17179572.368000] PREFETCH window:> > > > > > e0000000-e7ffffff> > > > > > [17179572.368000] PCI: Bus 3, cardbus> > bridge:> > > > > > 0000:02:00.0> > > > > > [17179572.368000] IO window:> > 00004000-000040ff> > > > > > [17179572.368000] IO window:> > 00004400-000044ff> > > > > > [17179572.368000] PREFETCH window:> > > > > > e8000000-e9ffffff> > > > > > [17179572.3...>> [Message clipped]
