Ralf, Intel 82801G (ICH7), Germany, Debian GNU/Linux 4.0 kernel 2.6.18-3-686

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As suggested by Marvin Stodolsky I updated to ALSA 1.0.14rc1 (also
kernel changed)
/proc/asound/pcm now includes an entry for 00-06 Si3054 Modem.

$ slmodemd --country=GERMANY --alsa hw:0,6
SmartLink Soft Modem: version 2.9.9e-pre1 Oct 13 2006 19:08:35
symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
modem `hw:0,6' created. TTY is `/dev/pts/1'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.

$ wvdial
--> WvDial: Internet dialer version 1.56
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+MS=34
AT+MS=34
OK
--> Modem initialized.
--> Sending: ATDT01920783
--> Waiting for carrier.
ATDT01920783
NO CARRIER
ERROR
--> No Carrier!  Trying again.
--> Sending: ATDT01920783
--> Waiting for carrier.
ATDT01920783
NO CARRIER
ERROR
--> No Carrier!  Trying again.

FAILS (getting an error: cannot setup hw params for playback: Invalid
argument)

I add Windows Informations:
--------------------------------------------------------
ATI3 - Agere SoftModem Version 2.1.72
ATI4 - Built on 06/29/2006 13:13:02
ATI5 - 2.1.72, HDA MB, HDA, A3 S-Rev:2  L-Rev:2, 06
ATI6 - OK
ATI7 - HDA MB
---------------------------------------------------------

Thanks for help,
Ralf.

Marvin Stodolsky wrote:
> Ralf
> 
> Likely you will have to update to
> alsa-driver and alsa-lib version 1.0.14rc1
> There are general instructions for upgrading snd-hda-intel and its
> dependent driver set at
> http://linmodems.technion.ac.il/archive-fourth/msg05023.html
(the link is not working)
> 
> Report back presently.
> We don't have a clean success with the chipset Vendor Id: 0x11c11040
> 
> MarvS
> scanModem maintainer
> 
 Only plain text email is forwarded by the  DISCUSS@xxxxxxxxxxxxx List Server.
 Do use the following as the email Subject Line:
           SomeName, YourCountry Debian GNU/Linux 4.0  kernel 2.6.18-3-686 
 This will alert cogent experts, and  distinguish cases in the Archives.
 YourCountry will enable Country Code guidance.
 Occassionally responses are blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org .
 Local Linux experts can be found through: http://www.linux.org/groups/index.html
--------------------------  System information ----------------------------
 Debian GNU/Linux 4.0 
Linux version 2.6.18-3-686 (Debian 2.6.18-7) (waldi@xxxxxxxxxx) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec 4 16:41:14 UTC 2006
 scanModem update of:  2006_December_25
The modem symbolic link is /dev/modem -> ttySL0

USB modem not detected by lsusb

Modem or host audio card candidates have firmware information:

 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:27d8	17aa:3802	Audio device: Intel Corporation 82801G 

 Modem interrupt assignment and sharing: 
185:        472   IO-APIC-level  ohci1394, HDA Intel

 --- Bootup diagnositcs for card in PCI slot 00:1b.0 ----
PCI->APIC IRQ transform: 0000:00:1b.0[A] -> IRQ 185
PCI: Setting latency timer of device 0000:00:1b.0 to 64

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

8086:27d8 is a High Definition Audio card, possibly hosting a soft modem.


There may be novel modem chipset information within the /proc/asound/ 
files. They have been copied and packed into a file: Modem/11c1.tgz
Please send 11c1.tgz to the scanModem maintainer:  Marvin.Stodolsky@xxxxxxxxx

 For candidate modem in PCI bus:  00:1b.0
   Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
      Primary PCI_id  8086:27d8
    Subsystem PCI_id  17aa:3802 
    Softmodem codec or Vendor from diagnostics: 11c1, an AgereSystems type.
                              from    Archives: 
      

 This is a NEW softmodem case!  Please send the output ModemData.txt 
 to DISCUSS@xxxxxxxxxxxxx , even if further assistance is not needed.
 It will enrich the Archive and help others!
 -------------------------------------------
 Lacking a dsp (digital signal processing) chip, the modem is a software 
 intensive or "softmodem" type. Its primary controller manages the traffic 
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:	slmodemd

 An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-hda-intel
 provides Low Level support enabling contact with the modem hardware.
 For all BUT Conexant chip soft modems (using hsfmodem software)
 complementary High Level support is through a Smartlink utility:  slmodemd

 Download from http://linmodems.technion.ac.il/packages/smartlink/ 
 the package SLMODEMD.gcc4.tar.gz having a compiled slmodemd. Unpack under Linux with:
 	$ tar zxf SLMODEMD.gcc4.tar.gz
 and read instructions therein. But briefly, the modem is setup with command:
 	 slmodemd -c YOUR_COUNTRY --alsa hw:0,6 
 reporting dynamic creation of ports:
	/dev/ttySL0 --> /dev/pts/N   , with N some number
 Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.

 Already loaded into the kernel is snd-hda-intel and audio drivers it depends on,
 displayed by:	lsmod | grep snd_hda_intel
Module                  Size  Used by
-------------------------------------
snd_hda_intel          19928  0 
snd_hda_codec         180288  1 snd_hda_intel
snd_pcm                69764  7 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd                    50376  14 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_dummy,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
snd_page_alloc          9640  5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm


The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
	/proc/asound/pcm
-------------------------------
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-00: HDA Generic : HDA Generic : playback 1 : capture 1

	/proc/asound/modules
-------------------------------
 0 snd_hda_intel
	/proc/asound/card0/codec#1
-------------------------------
Codec: Generic 11c1 Si3054
Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x11c10001
Revision Id: 0x100200
-------------------------------
Current support status of HDA cards is:
  Vendor IDs  Chip maker     Support type 
  ----------  ----------    -------------
  0x14f12bfa  Conexant      hsfmodem , not slmodemd compatible
  0x11c13026  AgereSystems  snd-hda-intel, slmodemd supported
  0x11c11040  AgereSystems      "             "    , patch needed
  0x11c13055  AgereSystems      "             "    ,      "
  0x163c3055  Smartlink         "             "    ,      "
  0x163c3155    "               "             "    ,      "
  0x10573055  Motorola          "             "    ,      "
  0x10573155     "              "             "    ,      ""
as of October 2006.

and from the command:
	aplay -l | grep -i modem
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]

----------------end Softmodem section --------------

Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.2
             and the compiler used in kernel assembly: 4.1.2

 Kernel-header resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
	 kernel-source-2.6.18-3-686
Compressed files at: /usr/src/fglrx.tar.bz2 /usr/src/linux-2.6.19.2.tar.bz2 /usr/src/linux-source-2.6.18.tar.bz2

For Debian and some related distributions, a package kernel-kbuild-2.6-3 may be needed to support driver compiling


Checking pppd properties:
	-rwsr-xr-- 1 root dip 260920 2006-11-14 14:44 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	 chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
auth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx


 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   lrwxrwxrwx 1 root root 6 2007-01-17 00:27 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
     Within /etc/modprobe.conf files:
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ;  modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0) 
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:
/etc/modules.conf:### update-modules: start processing /etc/modutils/sl-modem-daemon.modutils
/etc/modules.conf:### update-modules: end processing /etc/modutils/sl-modem-daemon.modutils
/etc/modules.conf.old:### update-modules: start processing /etc/modutils/sl-modem-daemon.modutils
/etc/modules.conf.old:### update-modules: end processing /etc/modutils/sl-modem-daemon.modutils
--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux