Hi!
In my notebook i have a "Motorola SM56 data fax modem" under windows. In Ubuntu i can't use modem.
This is my modemdata.txt.
Thank to all!
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Ubuntu 6.06.1 LTS kernel 2.6.15-26-686
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable
Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.htm
-------------------------- System information ----------------------------
Ubuntu 6.06.1 LTS
Linux version 2.6.15-26-686 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu Aug 3 03:13:28 UTC 2006
scanModem update of: 2006_December_25
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
0000:00:1b.0 8086:27d8 1734:10b0 0403: Intel Corporation 82801G
Modem interrupt assignment and sharing:
58: 182 0 IO-APIC-level HDA Intel
--- Bootup diagnositcs for card in PCI slot 0000:00:1b.0 ----
[17179608.488000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 58
[17179608.488000] PCI: Setting latency timer of device 0000:00:1b.0 to
64
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
8086:27d8 is a High Definition Audio card,
possibly hosting a soft modem.
snd-hda-intel may not be competent to read /proc/asound/card0/codec#1
before 2.6.15 kernels, for HDA card 8086:27d8
There
may be novel modem chipset information within the /proc/asound/
files. They have been copied and packed into a file: Modem/ALC880.tgz
Please send ALC880.tgz
to the scanModem maintainer: Marvin.Stodolsky@xxxxxxxxx
A candidate driver could not be identified.
For candidate modem in PCI bus: 0000:00:1b.0
Class 0403: 8086:27d8 0403: Intel Corporation 82801G
Primary PCI_id 8086:27d8
Subsystem PCI_id 1734:10b0
Softmodem codec or Vendor from
diagnostics: ALC880
from Archives:
Lacking a dsp (digital signal processing) chip, the modem is a software
intensive or "softmodem" type. Its primary controller manages the traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver:
provides Low Level support enabling contact with the
modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility:
slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.tar.gz having a compiled slmodemd. Unpack under
Linux with:
$ tar zxf SLMODEMD.gcc4.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY
--alsa
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow
through guidance.
The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can
browse. The information
is from files:
/proc/asound/pcm
-------------------------------
00-02: ALC880 Digital : ALC880 Digital : playback 1
00-01: ALC880 Analog : ALC880 Analog : capture 2
00-00: ALC880 Analog :
ALC880 Analog : playback 1 : capture 2
/proc/asound/modules
-------------------------------
0 snd_hda_intel
/proc/asound/card0/codec#1
-------------------------------
Codec: Realtek ALC880
Address: 1
Vendor Id: 0x10ec0880
Subsystem Id: 0x8800000
Revision Id: 0x100800
Default PCM: rates 0x560, bits 0x0e, types 0x1
Default
Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x411: Stereo
PCM: rates 0x560, bits 0x0e, types 0x1
Power: 0x0
Node 0x03
[Audio Output] wcaps 0x411: Stereo
PCM: rates 0x560, bits 0x0e, types 0x1
Power: 0x0
Node 0x04 [Audio Output] wcaps 0x411: Stereo
PCM: rates 0x160,
bits 0x0e, types 0x1
Power: 0x0
Node 0x05 [Audio Output] wcaps 0x411: Stereo
PCM: rates 0x160, bits 0x0e, types 0x1
Power: 0x0
Node 0x06 [Audio Output]
wcaps 0x211: Stereo Digital
PCM: rates 0x160, bits 0x1e, types 0x1
Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00,
nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals: [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3]
PCM: rates 0x160,
bits 0x06, types 0x1
Power: 0x0
Connection: 7
0x18* 0x19 0x1a 0x1b 0x1c 0x14 0x15
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In
caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals: [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3]
PCM:
rates 0x160, bits 0x06, types 0x1
Power: 0x0
Connection: 7
0x18* 0x19 0x1a 0x1b 0x1c 0x14 0x15
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo
Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals: [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3]
[0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3]
PCM: rates 0x160, bits 0x06, types 0x1
Power: 0x0
Connection: 10
0x18* 0x19 0x1a 0x1b 0x1c 0x0b
0x14 0x15 0x16 0x17
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
PCM: rates 0x160, bits 0x1e, types 0x1
Connection: 1
0x1f
Node 0x0b
[Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x00 0x00]
[0x00 0x00] [0x00 0x00] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3]
Connection: 8
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15
Node 0x0c [Audio Mixer] wcaps
0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x40,
nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x30 0x30]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03,
mute=0
Amp-Out vals: [0x30 0x30]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00,
nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals:
[0x00 0x00]
Connection: 2
0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00,
mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x05 0x0b
Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x11 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x12 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x13 [Audio
Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00,
nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x08133f: IN OUT HP Detect
Pin Default 0x0121411f: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x0c
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00,
nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x08133f: IN OUT HP Detect
Pin Default 0x99030120: [Fixed] Line Out at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1
0x0d
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps:
ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x080:
Pin Default 0x99030130: [Fixed] Line Out at Int ATAPI
Conn =
ATAPI, Color = Unknown
Pin-ctls: 0x00:
Connection: 1
0x0e
Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00,
nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x080:
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color =
Black
Pin-ctls: 0x00:
Connection: 1
0x0f
Node 0x18 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00,
stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08133f: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8,
Color = Black
Pin-ctls: 0x21: IN
Connection: 1
0x10
Node 0x19 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00,
stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08133f: IN OUT HP Detect
Pin Default 0x01a19950: [Jack] Mic at Ext Rear
Conn = 1/8, Color
= Pink
Pin-ctls: 0x24: IN
Connection: 1
0x11
Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00,
stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08133f: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8,
Color = Black
Pin-ctls: 0x20: IN
Connection: 1
0x12
Node 0x1b [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00,
stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08133f: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8,
Color = Black
Pin-ctls: 0x20: IN
Connection: 1
0x13
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x411111f0:
[N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default
0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
Pincap 0x0810:
OUT
Pin Default 0x01454140: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Green
Pin-ctls: 0x00:
Connection: 1
0x06
Node 0x1f [Pin
Complex] wcaps 0x400200: Mono Digital
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls:
0x00:
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
-------------------------------
Current support status of HDA cards is:
Vendor IDs Chip maker Support type
---------- ---------- -------------
0x14f12bfa Conexant hsfmodem , not slmodemd compatible
0x11c13026 AgereSystems snd-hda-intel, slmodemd supported
0x11c11040 AgereSystems " " , patch needed
0x11c13055 AgereSystems " " , "
0x163c3055 Smartlink " " , "
0x163c3155 " " " , "
0x10573055 Motorola " " , "
0x10573155 " " " , ""
as of October 2006.
and from the command:
aplay -l | grep -i modem
----------------end Softmodem section --------------
Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.0.3
and the compiler used in kernel assembly: 4.0.3
Compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.0
kernel_headers base folder /lib/modules/2.6.15-26-686/build
Compressed files at: /usr/src/linux-source-2.6.15.tar.bz2
Checking pppd properties:
-rwsr-xr-- 1 root dip 257720 2006-07-05 15:00 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
auth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
Don't worry about the following, it is for the experts
should
trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/60-symlinks.rules:# Create /dev/modem symlink
/etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*",
SYMLINK+="modem"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options
snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs
files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
------------------------------------------------------
Passa a Infostrada. ADSL e Telefono senza limiti e senza canone Telecom
http://click.libero.it/infostrada13gen07
