Hi,
I'm using an IBM/Lenovo ThinkPad T41 [Model no. 2373-2FG]. Cannot get
the modem to work.
I ran scanModem, here is the output from Modemdata.txt:
-------------------------- System information ----------------------------
Linux version 2.4.26 (root@Knoppix) (gcc version 2.95.4 20011002
(Debian prerelease)) #1 SMP Sa Apr 17 19:33:42 CEST 2004
scanModem update of: 2006_December_25
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
0000:00:1f.6 8086:24c6 1014:0525 Modem: Intel Corp. 82801DB
Modem interrupt assignment and sharing:
11: 1068 XT-PIC PCI device 104c:ac46 (Texas
Instruments), PCI device 104c:ac46 (Texas Instruments), usb-uhci,
usb-uhci, usb-uhci, Intel ICH4, eth0
--- Bootup diagnositcs for card in PCI slot 0000:00:1f.6 ----
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
The snd-intel8x0m is not supported by this kernel.
Output from scanout.0000:00:1f.6:
PCIDEV=8086:24c6
CLASS="Class 0703: 8086:24c6"
NAME="Modem: Intel Corp. 82801DB "
Vendor=8086
Device=24c6
SUBSYS=1014:0525
SUBNAME=" IBM: Unknown device 0525"
SUBven=1014
IRQ=11
Test="./scanModem test 8086:24c6 1014:0525"
SOFT=8086:24c6
SLMODEMD_DEVICE=modem:1
PORT="modem:1"
Driver=snd-intel8x0m
DRIVER_=snd_intel8x0m
KDRIVER=SND_NTEL8X0M
I attached dmesg - might help???
Am a relative newbie - need some help here!
--
Thanks and best regards,
Ed Kidgell
Mobile: +27.84.619.7065
Alt: +27.11.675.1251
eMail [alt.]: edkidgell@xxxxxxxxxxxx
Linux version 2.4.26 (root@Knoppix) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Sa Apr 17 19:33:42 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002ff50000 (usable)
BIOS-e820: 000000002ff50000 - 000000002ff67000 (ACPI data)
BIOS-e820: 000000002ff67000 - 000000002ff79000 (ACPI NVS)
BIOS-e820: 000000002ff80000 - 0000000030000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
On node 0 totalpages: 196432
zone(0): 4096 pages.
zone(1): 192336 pages.
zone(2): 0 pages.
IBM machine detected. Enabling interrupts during APM calls.
ACPI: RSDP (v002 IBM ) @ 0x000f6d70
ACPI: XSDT (v001 IBM TP-1R 0x00003210 LTP 0x00000000) @ 0x2ff5a6bd
ACPI: FADT (v003 IBM TP-1R 0x00003210 IBM 0x00000001) @ 0x2ff5a800
ACPI: SSDT (v001 IBM TP-1R 0x00003210 MSFT 0x0100000e) @ 0x2ff5a9b4
ACPI: ECDT (v001 IBM TP-1R 0x00003210 IBM 0x00000001) @ 0x2ff66ecc
ACPI: TCPA (v001 IBM TP-1R 0x00003210 PTL 0x00000001) @ 0x2ff66f1e
ACPI: BOOT (v001 IBM TP-1R 0x00003210 LTP 0x00000001) @ 0x2ff66fd8
ACPI: DSDT (v001 IBM TP-1R 0x00003210 MSFT 0x0100000e) @ 0x00000000
Kernel command line: root=/dev/hda6 quiet vga=791 noacpi noapm dma noscsi frugal
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1395.515 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2785.28 BogoMIPS
Memory: 773552k/785728k available (1371k kernel code, 11788k reserved, 561k data, 140k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: a7e9fbbf 00000000 00000000 00000000
CPU: Common caps: a7e9fbbf 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: a7e9fbbf 00000000 00000000 00000000
CPU: Common caps: a7e9fbbf 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) M processor 1400MHz stepping 05
per-CPU timeslice cutoff: 2925.05 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1395.4723 MHz.
..... host bus clock speed is 99.6764 MHz.
cpu: 0, clocks: 996764, slice: 498382
CPU0<T0:996752,T1:498368,D:2,S:498382,C:996764>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
PCI: Using configuration type 1
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Found ECDT
schedule_task(): keventd has not started
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 28)
schedule_task(): keventd has not started
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xe0000000, mapped to 0xf0823000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: protected mode interface info at c000:5710
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
hda: HTS541040G9AT00, ATA DISK drive
hdc: UJDA755zDVD/CDRW, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78140160 sectors (40008 MB) w/7539KiB Cache, CHS=5168/240/63
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hda3
ide: late registration of driver.
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
EXT2-fs warning (device ide0(3,6)): ext2_read_super: mounting ext3 filesystem as ext2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 140k freed
Real Time Clock Driver v1.10f
Adding Swap: 499928k swap-space (priority -1)
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: MATSHITA Model: UJDA755zDVD/CDRW Rev: 1.20
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Yenta ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000086
Yenta ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000086
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:48:59 Apr 17 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
hw_random hardware driver 1.0.0 loaded
hostap_crypt: registered algorithm 'NULL'
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 0.44
ipw2100: Copyright(c) 2003-2004 Intel Corporation
Detected ipw2100 PCI device at 02:02.0, dev: eth0, mem: 0xC0214000-0xC0214FFF -> f0bd7000, irq: 11
eth0: Using hotplug firmware load.
Intel(R) PRO/1000 Network Driver - version 5.2.30.1-k1
Copyright (c) 1999-2004 Intel Corporation.
Intel 810 + AC97 Audio, version 0.24, 19:47:54 Apr 17 2004
eth0: Firmware 'ipw2100-1.1.fw' not available or load failed.
eth0: ipw2100_get_firmware failed: -2
eth0: Failed to power on the adapter.
eth0: Failed to start the firmware.
hostap_crypt: unregistered algorithm 'NULL' (deinit)
eth0: Intel(R) PRO/1000 Network Connection
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xc0000c00 and 0xc0000800, IRQ 11
i810: Intel ICH4 mmio at 0xf0bb0c00 and 0xf0bd5800
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ADS116 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 690M
agpgart: Detected Intel(R) 855PM chipset
agpgart: AGP aperture is 256M @ 0xd0000000
blk: queue c03591e0, I/O limit 4095Mb (mask 0xffffffff)
FAT: Did not find valid FSINFO signature.
Found signature1 0x4f04042d signature2 0x7274532f sector=18894.
VFS: Can't find a valid FAT filesystem on dev 03:01.
FAT: Did not find valid FSINFO signature.
Found signature1 0x4f04042d signature2 0x7274532f sector=18894.
VFS: Can't find a valid FAT filesystem on dev 03:01.
NTFS driver v1.1.22 [Flags: R/W MODULE]
Journalled Block Device driver loaded
VFS: Can't find ext3 filesystem on dev ide0(3,8).
VFS: Can't find ext2 filesystem on dev ide0(3,8).
Unable to identify CD-ROM format.
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,8)) ...
for (ide0(3,8))
ide0(3,8):Using r5 hash to sort names
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex
cloop: Initializing cloop v2.01
cloop: loaded (max 128 devices)
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
sr0: CDROM (ioctl) reports ILLEGAL REQUEST.
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,8)) ...
for (ide0(3,8))
ide0(3,8):Using r5 hash to sort names
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: overridden by ACPI.
