Re: Compaq nw9440, USA Ubuntu 6.10 kernel 2.6.17-10-386

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Martin

from
From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem_7.47.00.07full_k2.6.17_10_generic_ubuntu_i386.deb.zip

Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See Testing.txt  for details.

Read Conexant.txt

MarvS
scanModem maintainer

On 1/4/07, Martin Espinoza <martin.espinoza@xxxxxxxxx> wrote:
Tried to send this once... Trying again.


Only plain text email is forwarded by the  DISCUSS@xxxxxxxxxxxxx List Server.
 Do use the following as the email Subject Line:
           SomeName, YourCountry Ubuntu 6.10  kernel  2.6.17-10-386
 This will alert cogent experts, and  distinguish cases in the Archives.
 YourCountry will enable Country Code guidance.
 Occassionally responses are blocked by an Internet Provider mail filters.
  So in a day, also check the Archived responses at http://www.linmodems.org .
 Local Linux experts can be found through:
http://www.linux.org/groups/index.html
--------------------------  System information ----------------------------
 Ubuntu 6.10
Linux version 2.6.17-10-386 (root@terranova) (gcc version 4.1.2
20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Tue Dec 5 22:26:18
UTC 2006 (Ubuntu 2.6.17-10.34-386)
 scanModem update of:  2006_December_20


USB modem not detected by lsusb

Modem or host audio card candidates have firmware information:

 PCI slot    PCI ID        SubsystemID    Name
 ----------    ---------    ---------    --------------
 02:06.4    104c:803d    103c:309f    Communication controller: Texas
Instruments Unknown device 803d

 Modem interrupt assignment and sharing:

  --- Bootup diagnositcs for card in PCI slot 02:06.4 ----

 PCI slot    PCI ID        SubsystemID    Name
 ----------    ---------    ---------    --------------
 00:1b.0    8086:27d8    103c:309f    Audio device: Intel Corporation 82801G

 Modem interrupt assignment and sharing:
177:     139784   IO-APIC-level  HDA Intel, nvidia

 --- Bootup diagnositcs for card in PCI slot 00:1b.0 ----
[17179601.468000] ACPI: PCI Interrupt 0000:00:1b.0 [A] -> GSI 16
(level, low) -> IRQ 177
[17179601.468000] PCI: Setting latency timer of device 0000:00:1b.0 to 64

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

 and a NEW HDA softmodem controller.

 For candidate modem in PCI bus:  00:1b.0
   Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
      Primary PCI_id  8086:27d8
    Subsystem PCI_id  103c:309f
    Softmodem codec or Vendor from diagnostics: 14f1, a Conexant type,
                              from    Archives:


 This is a NEW softmodem case!  Please send the output ModemData.txt
 to  DISCUSS@xxxxxxxxxxxxx , even if further assistance is not needed.
 It will enrich the Archive and help others!
 -----------------------------
--------------
 Lacking a dsp (digital signal processing) chip, the modem is a software
 intensive or "softmodem" type. Its primary controller manages the traffic
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:

Support can likely be achieved through two mutually exclusive alternatives:
1) An ALSA modem driver plus slmodemd.  Read Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.tar.gz from:
     http://linmodems.technion.ac.il/packages/smartlink/
2) The hsfmodem software for Conexant chipset modems: Read Conexant.txt

 An ALSA (Advanced Linux Sound Architecture) modem driver:
 provides Low Level support enabling contact with the modem hardware.
 For all BUT Conexant chip soft modems (using hsfmodem software)
 complementary High Level support is through a Smartlink utility:  slmodemd

 Download from http://linmodems.technion.ac.il/packages/smartlink/
 the package SLMODEMD.gcc4.tar.gz having a compiled slmodemd. Unpack
under Linux with:
     $ tar zxf SLMODEMD.gcc4.tar.gz
 and read instructions therein. But briefly, the modem is setup with command:
     sudo slmodemd -c YOUR_COUNTRY --alsa
 reporting dynamic creation of ports:
    /dev/ttySL0 --> /dev/pts/N   , with N some number
 Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.


The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The
information
is from files:
    /proc/asound/pcm
-------------------------------
00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1

    /proc/asound/modules
-------------------------------
 0 snd_hda_intel
    /proc/asound/card0/codec#1
-------------------------------
Codec: Generic 14f1 ID 2bfa
Address: 1
Vendor Id: 0x14f12bfa
Subsystem Id: 0x103c309f
Revision Id: 0x90000
-------------------------------
Current support status of HDA cards is:
  Vendor IDs  Chip maker     Support type
  ----------  ----------    -------------
  0x14f12bfa  Conexant      hsfmodem , not slmodemd compatible
  0x11c13026  AgereSystems  snd-hda-intel, slmodemd supported
  0x11c11040  AgereSystems      "             "    , patch needed
  0x11c13055  AgereSystems      "             "    ,      "
  0x163c3055  Smartlink         "             "    ,      "
  0x163c3155    "               "             "    ,      "
  0x10573055  Motorola          "             "    ,      "
  0x10573155     "              "             "    ,      ""
as of October 2006.

and from the command:
    aplay -l | grep -i modem


----------------end Softmodem section --------------

scanModem could not identify the Support Type needed from diagnosics
or archives.
    If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
   Start > Settings > Control Panel > Classical View (for Window XP) > System
> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information.
Next do the Query Modem and record the ATI specifications displayed such as:
    ATI3 - Agere SoftModem Version 2.1.22
    ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.


Writing Intel.txt

 Formal support for Conexant chipset modems are available ONLY through
 http://www.linuxant.com/drivers.  Read Conexant.txt for details.
  and Modem/YourSystem.txt for follow through guidance.  Driver speed
is limited to
 14,400 until a key is purchased.  There is NO freeware alternative.
 There are two support package types: hsfmodem  and hcflinmodem.
 http://www.lorenzobettini.it/linux/LinuxSonyVaioVGN-S5VP_B reports a
 problem and solution in stalling a key, after testing of the free low
  speed download.

 Read Conexant.txt

Writing Conexant.txt

Writing Smartlink.txt
============ end Smartlink section =====================

 For candidate modem in PCI bus:  02:06.4
   Class 0780: 104c:803d Communication controller: Texas Instruments
Unknown device 803d
      Primary PCI_id  NEW_softmodem_104c:803d
 Support type needed or chipset:    hsfmodem



 Formal support for Conexant chipset modems are available ONLY through
  http://www.linuxant.com/drivers.  Read Conexant.txt for details.
 and Modem/YourSystem.txt for follow through guidance.  Driver speed
is limited to
 14,400 until a key is purchased.  There is NO freeware alternative.
 There are two support package types: hsfmodem  and hcflinmodem.
 http://www.lorenzobettini.it/linux/LinuxSonyVaioVGN-S5VP_B reports a
 problem and solution in stalling a key, after testing of the free low
 speed download.

 The hsfmodem package serves a great variety of Conexant chipset modems.
 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem_VersionSpec_k2.6.17_10_386_ubuntu_i386.deb.zip
                           with 2.6.17_10_386 equivalent to
2.6.17-10-386, your kernel version.
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See Testing.txt  for details.

 Read Conexant.txt

Writing Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.2
             and the compiler used in kernel assembly: 4.1.2



 Compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   kernel_headers base folder /lib/modules/2.6.17-10-386/build


Checking pppd properties:
    -rwsr-xr-- 1 root dip 260920 2006-07-10 12:13 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
    $ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
    sudo chmod a+x /usr/sbin/pppd

Checking settings of:    /etc/ppp/options
asyncmap 0
auth
crtscts
lock
hide-password
 modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

Read Modem/YourSystem.txt concerning other COMM channels: eth1
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
     Within /etc/udev/ files:
/etc/udev/rules.d/60-symlinks.rules:# Create /dev/modem symlink
/etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*",
SYMLINK+="modem"
     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux