Dmitry Russian

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





Поздравь друзей и  родных по телефону через Агент@Mail.Ru!
Выгодные тарифы! http://r.mail.ru/cln3380/agent.mail.ru/faq.html
 Only plain text email is forwarded by the  DISCUSS@xxxxxxxxxxxxx List Server.
 Do use the following as the email Subject Line:
           SomeName, YourCountry Fedora Core release 6 (Zod)
Kernel  kernel 2.6.18-prep 
 This will alert cogent experts, and  distinguish cases in the Archives.
 YourCountry will enable Country Code guidance.
 Occassionally responses are blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org .
 Local Linux experts can be found through: http://www.linux.org/groups/index.html
--------------------------  System information ----------------------------
 Fedora Core release 6 (Zod)
Kernel 
Linux version 2.6.18-prep (root@Linux) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #13 SMP Mon Jan 1 01:47:53 MSK 2007
 scanModem update of:  2006_December_25


USB modem not detected by lsusb

Modem or host audio card candidates have firmware information:

 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:27d8	103c:30a2	Audio device: Intel Corporation 82801G 

 Modem interrupt assignment and sharing: 
 16:      17701          0   IO-APIC-level  HDA Intel

 --- Bootup diagnositcs for card in PCI slot 00:1b.0 ----
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

8086:27d8 is a High Definition Audio card, possibly hosting a soft modem.


The VendorID 0x11c11040 softmodem chip is in principle supported by the snd-hda-intel driver 
included within the ALSA audio+modem driver set.  However recognition of 0x11c11040 first begins with ALSA version 1.0.13. There are instructions for upgrading snd-hda-intel and its
dependent driver set at http://linmodems.technion.ac.il/archive-fourth/msg0????.html
The ? in the device designation in hw:0,? will be manifest after the driver update.
Typically ? is in the range of 0-6 .


There may be novel modem chipset information within the /proc/asound/ 
files. They have been copied and packed into a file: Modem/11c1.tgz
Please send 11c1.tgz to the scanModem maintainer:  Marvin.Stodolsky@xxxxxxxxx

 A candidate driver could not be identified.
 For candidate modem in PCI bus:  00:1b.0
   Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
      Primary PCI_id  8086:27d8
    Subsystem PCI_id  103c:30a2 
    Softmodem codec or Vendor from diagnostics: 11c1, an AgereSystems type.
                              from    Archives: 11c1, an AgereSystems type.
      

 Lacking a dsp (digital signal processing) chip, the modem is a software 
 intensive or "softmodem" type. Its primary controller manages the traffic 
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:	slmodemd

 An ALSA (Advanced Linux Sound Architecture) modem driver:  
 provides Low Level support enabling contact with the modem hardware.
 For all BUT Conexant chip soft modems (using hsfmodem software)
 complementary High Level support is through a Smartlink utility:  slmodemd

 Download from http://linmodems.technion.ac.il/packages/smartlink/ 
 the package SLMODEMD.gcc4.tar.gz having a compiled slmodemd. Unpack under Linux with:
 	$ tar zxf SLMODEMD.gcc4.tar.gz
 and read instructions therein. But briefly, the modem is setup with command:
 	 slmodemd -c YOUR_COUNTRY --alsa hw:0,? 
 reporting dynamic creation of ports:
	/dev/ttySL0 --> /dev/pts/N   , with N some number
 Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.


The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
	/proc/asound/pcm
-------------------------------
00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1

	/proc/asound/modules
-------------------------------
 0 snd_hda_intel
	/proc/asound/card0/codec#1
-------------------------------
Codec: Generic 11c1 ID 1040
Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x103c1378
Revision Id: 0x100200
-------------------------------
Current support status of HDA cards is:
  Vendor IDs  Chip maker     Support type 
  ----------  ----------    -------------
  0x14f12bfa  Conexant      hsfmodem , not slmodemd compatible
  0x11c13026  AgereSystems  snd-hda-intel, slmodemd supported
  0x11c11040  AgereSystems      "             "    , patch needed
  0x11c13055  AgereSystems      "             "    ,      "
  0x163c3055  Smartlink         "             "    ,      "
  0x163c3155    "               "             "    ,      "
  0x10573055  Motorola          "             "    ,      "
  0x10573155     "              "             "    ,      ""
as of October 2006.

and from the command:
	aplay -l | grep -i modem


----------------end Softmodem section --------------

Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.1
             and the compiler used in kernel assembly: 4.1.1

 Kernel-header resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
	 kernel-source-2.6.18-prep


Checking pppd properties:
	-r-xr-xr-x 1 root root 312956 Jul 24 22:54 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	 chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
lock


 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:
/etc/udev/rules.d/50-udev.rules:KERNEL=="modems/mwave*",        NAME="%k", GROUP="uucp", MODE="0660"
     Within /etc/modprobe.conf files:

     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux