Marvin,
the --dumpdiag option hels finding why the driver does not work.
> + modprobe -v /dev/ttySHCF
> modprobe: Can't locate module /dev/ttySHCF
means that is is not installed.
Thus you MUST have received earlier error messages when running the
Debian install command (dkpg).
Do you have a compiler? Try gcc to see !
Do you have kernel sources? Do find / -iname 'kernel*' to find them.
Where to take them from?
http://www.damnsmalllinux.org/ has a link to Downloads, "preferred sites".
Select one and browse.
Jacques
Marvin Potts wrote:
I really appreciate the help I've received to this point (from Jacques
Goldberg). I have successfully downloaded the Debian package (method
B) installation of the source code.
Below is what is received when issuing the command, "hcfpciconfig
--dumpdiag". I am running DSL (Damn Small Linux 2.4.26) on an 800 MHz
pentium III. I believe I need the kernel source and a C-compiler for
DSL. Do you know where/how to obtain the kernel source? hcfpciconfig
tells me to run "apt-get install kernel-headers-2.4.26" but I don't
think that will work without being connected to the internet -- right?
Thanks,
Marvin
------------------------------------------------------
+ hcfpcistop
+ modprobe -v /dev/ttySHCF
modprobe: Can't locate module /dev/ttySHCF
+ lsmod
Module Size Used by Not tainted
mousedev 3832 0 (unused)
hid 22372 0 (unused)
input 3168 0 [mousedev hid]
cloop 39364 0 (unused)
es1371 30120 0
gameport 1388 0 [es1371]
ac97_codec 11884 0 [es1371]
soundcore 3428 4 [es1371]
i810_rng 2660 0 (unused)
serial 52068 0 (autoclean)
usb-uhci 21836 0 (unused)
usbcore 57824 1 [hid usb-uhci]
pcmcia_core 39840 0
thermal 6532 0 (unused)
processor 8976 0 [thermal]
fan 1568 0 (unused)
button 2508 0 (unused)
battery 5888 0 (unused)
ac 1792 0 (unused)
ide-cd 28704 0
ide-scsi 9040 0
rtc 7004 0 (autoclean)
+ date
Mon Jan 1 15:10:59 EST 2007
+ /usr/sbin/hcfpciconfig --info
Conexant HCF controllerless PCI modem driver, version 1.10full
If you need license keys, assistance or more information, please go to:
http://www.linuxant.com/
When reporting a problem for the first time, please send
us the file generated by "hcfpciconfig --dumpdiag".
ERROR: hcfpci driver not active
+ identify_system
linux-i686(i686)-2.4.26-SMP Debian-testing/unstable
+ uname -a
Linux box 2.4.26 #1 SMP Sa Apr 17 19:33:42 CEST 2004 i686 unknown
+ gcc -v
/usr/sbin/hcfpciconfig: line 1: gcc: command not found
+ cat -v /proc/version
cat: invalid option -- v
BusyBox v1.00 (2006.01.04-23:00+0000) multi-call binary
Usage: cat [-u] [FILE]...
Concatenates FILE(s) and prints them to stdout.
Options:
-u ignored since unbuffered i/o is always used
+ cat -v /proc/cpuinfo
cat: invalid option -- v
BusyBox v1.00 (2006.01.04-23:00+0000) multi-call binary
Usage: cat [-u] [FILE]...
Concatenates FILE(s) and prints them to stdout.
Options:
-u ignored since unbuffered i/o is always used
+ cat -v /etc/debian_version
cat: invalid option -- v
BusyBox v1.00 (2006.01.04-23:00+0000) multi-call binary
Usage: cat [-u] [FILE]...
Concatenates FILE(s) and prints them to stdout.
Options:
-u ignored since unbuffered i/o is always used
+ dmesg
zone(1): 11968 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 AMI ) @ 0x000ff980
ACPI: RSDT (v001 DELL MUMMY 0x20010307 MSFT 0x00000097) @ 0x03ef0000
ACPI: FADT (v001 DELL MUMMY 0x20010307 MSFT 0x00000097) @ 0x03ef1000
ACPI: DSDT (v001 DELL DIM_L 0x00000012 MSFT 0x0100000b) @ 0x00000000
Kernel command line: auto BOOT_IMAGE=Linux ro root=301 hda=scsi
hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi
apm=power-off nomce noapic
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 797.427 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1592.52 BogoMIPS
Memory: 60568k/64256k available (1371k kernel code, 3300k reserved,
561k data, 140k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 06
per-CPU timeslice cutoff: 731.12 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 797.4303 MHz.
..... host bus clock speed is 132.9048 MHz.
cpu: 0, clocks: 1329048, slice: 664524
CPU0<T0:1329040,T1:664512,D:4,S:664524,C:1329048>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=1
PCI: Using configuration type 1
ACPI: IRQ9 SCI: Level Trigger.
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.PCI1._PRW] (Node c3ebab80), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed
[\_SB_.PCI0.PCI1._PRW] (Node c3ebab80), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.PCI1._PRW] (Node c3ebab80), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed
[\_SB_.PCI0.PCI1._PRW] (Node c3ebab80), AE_NOT_EXIST
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801AA PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 256 Unix98 ptys configured
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH: IDE controller at PCI slot 00:1f.1
ICH: chipset revision 2
ICH: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD100EB-11BHF0, ATA DISK drive
hdc: Lite-On LTN483S 48x Max, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 19541088 sectors (10005 MB) w/2048KiB Cache, CHS=1216/255/63
Partition check:
hda: hda1
ide: late registration of driver.
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 140k freed
Real Time Clock Driver v1.10f
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: Lite-On Model: LTN483S 48x Max Rev: PD02
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports C1)
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:48:59 Apr 17 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
i810_rng hardware driver 0.9.8 loaded
es1371: version v0.32 time 19:48:00 Apr 17 2004
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x09
es1371: found es1371 rev 9 at io 0xdf00 irq 10
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
cloop: Initializing cloop v2.01
cloop: loaded (max 128 devices)
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
cdrom: open failed.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: overridden by ACPI.
+ lspci -n
0000:00:00.0 0600: 8086:7124 (rev 03)
0000:00:01.0 0300: 8086:7125 (rev 03)
0000:00:1e.0 0604: 8086:2418 (rev 02)
0000:00:1f.0 0601: 8086:2410 (rev 02)
0000:00:1f
