Error slmodemd NO CARRIER - option: debug3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,
I have trouble connecting to the internet using slmodemd-2.9.11 on my
laptop.

Country: Germany

#### Output of slmodemd:
slmodemd -a -c GERMANY hw:0,6
SmartLink Soft Modem: version 2.9.11 Dec 30 2006 11:49:29
symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
modem `hw:0,6' created. TTY is `/dev/pts/1'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.

#### Output of minicom
Welcome to minicom 2.1

OPTIONS: History Buffer, F-key Macros, Search History Buffer, I18n 
Compiled on Jul 26 2006, 06:38:09.

Press CTRL-A Z for help on special keys
                                                                              
AT S7=45 S0=0 L1 V1 X4 &c1 E1
Q0                                              
OK                                                                            
#### End output minicom

#### Output of wvdial:
[root@client7 ~]# wvdial
--> WvDial: Internet dialer version 1.54.0
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: AT+GCI=42
AT+GCI=42
OK
--> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT01920785
--> Waiting for carrier.
ATDT01920785
--> Timed out while dialing.  Trying again.
--> Sending: ATDT01920785
--> Waiting for carrier.
NO CARRIER
ATDT01920785
--> No Carrier!  Trying again.
--> Sending: ATDT01920785
--> Waiting for carrier.
NO CARRIER
Caught signal #2!  Attempting to exit gracefully...
--> Disconnecting at Sun Dec 31 10:15:35 2006

#### End of output wvdial

I tried the script unloading, but no change.

#### Output of slmodemd --debug3:
SmartLink Soft Modem: version 2.9.11 Dec 30 2006 11:49:29
<665.370005> SmartLink Soft Modem: version 2.9.11 Dec 30 2006 11:49:29
<665.371160> hw:0,6: startup modem...
<665.371452> hw:0,6: update termios...
symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
modem `hw:0,6' created. TTY is `/dev/pts/1'
<665.372598> open file: /var/lib/slmodem/data.hw:0,6...
<665.372818> cannot open '/var/lib/slmodem/data.hw:0,6': No such file or directory
<665.374636> main: rt applyed: SCHED_FIFO, pri 99
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
<886.938506> main: signal 2: mark termination.
<886.938553> hw:0,6: modem_delete...

How do I create '/var/lib/slmodem/data.hw:0,6' ?

Any solutions?

-- 
With best regards

Hans-J. Klein <klein.hans@xxxxxxx>
----------------------------------------------------------
Public Key:
http://pgpkeys.telering.at/pks/lookup?op=get&search=0x1006E4DA340C1B32
Key fingerprint:  0945 2348 CDA7 5792 52D2  824F 1006 E4DA 340C 1B32
   
                The files in this Modem/ folder have the following roles:

ModemData.txt - Diagnostics and accumulated information cogent to your modem and host system.
     This is the ONLY file which should be sent to the List  DISCUSS@xxxxxxxxxxxxx , 
     if further help is needed. Send your email and attachments as plain text as 
     other formats are rejected by the List Server, to avoid virus transmission.
     Always send the ENTIRE ModemData.txt,  as It includes subtle diagnostic ouputs needed 
     to best guide you. Please in the covering email mention your Country, to enable Country 
     specific advice.
     Always use the most recent update of scanModem accessed ONLY at
	   http://linmodems.technion.ac.il/packages/scanModem.gz 
     to produce ModemData.txt
     URLs to cogent advice are regularly updated, so your problem may be solved therein.
     Please Do NOT send  Do NOT send other files in this folder Modem/

A file(s) specific to your modem chipset will be written, such as:
  Smartlink.txt, Conexant.txt, Intel.txt , etc

YourModem.txt - Guidance about operating your particular System, for your benefit
     It should NOT be sent to Discuss@xxxxxxxxxxxxx

Rational.txt - Motivations of this scanModem package.  

DriverCompiling.txt -  Explains the roles of additional files which may have to be installed
   to support compiling of modem drivers, and the steps to take.   

SoftModem.txt - Information and instructions about "soft modems".
     For these modems, additional steps may be necessary for choice of supporting software.
     The primary PCI ID is that of the host audio or modem controller, which can support diverse Subsystems. It is the chipset of the Subsystem which determines the software needed.

ModemTesting.txt SHOULD be read, but after drivers have been installed.

InfoGeneral.txt has general information about the status of winmodem support under Linux,
    Do read it if ModemData.txt  reports that your current modem is not supported under Linux. 

Unsubscribe.txt - Howto terminate email tranmissions from the List.

If you are Linux newcomer, please do locate your local Linux group through:
    http://www.linux.org/groups/index.html  .  If you are not comfortable with English,
    a local Linux user can often be of substantial assistance in getting you on to the Internet.
 
[Dialer defaults]
## filename /etc/wvdial.conf
# Lines begining with # are comments.
Modem = /dev/ttySL0   
Init1 = ATZ
Init2 = AT+GCI=42
#Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
#  Lack of dialtone acquisition can be due to low line voltage,
#    a common problem in Italy.
#  Try inserting a "dial without waiting": X3
Init3 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
#  In case of connection instabilities, specify a lower frequency:
#  Init3 = ATQ0 V1 E1 S0=0 X3 &C1 &D2  +MS=34
## See slmodemd --contrylist for your country
## this is for germany
ISDN = 0
Modem Type = Analog Modem
Phone =  01920785
# if going through a switch board, a perhaps necessary pause can 
# produced with a comma:
# Phone = 1,Dialout_phone_number 
Username = arcor
# if Internet Provider is MSN.net, use under Linux:   MSN/LoginName
Password = internet
## if using the SmartLink slmodem drivers, uncomment
Carrier Check = no
## If CONNECT is achieved but browsing fails, try activating the 
# following line
AutoDNS = yes
##    To make a logfile wvdial.out
wvdial 2>&1 | tee wvdial.out
# #  For some Internet providers, the following line is necessary 
Stupid Mode = yes
##  for other wvdial  options, do "man wvdial" or see the 
## documentation in /usr/share/doc/wvdial/
## End wvdial.conf

Attachment: signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux