ModemData.txt (This is a NEW softmodem case!)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Salut,

I used your great ScanModem tool. It produced many infos.
In ModemData.txt I found these lines:

___
This is a NEW softmodem case!  Please send the output ModemData.txt
 to DISCUSS@xxxxxxxxxxxxx , even if further assistance is not needed.
 It will enrich the Archive and help others!
___

So this is the mail and I will try to solve the problems, also that with
the soundcard HDA Intel (alc883), because the outline doesn't work...

Greetings
bernd

-- 
bernd winter
 Only plain text email is forwarded by the  DISCUSS@xxxxxxxxxxxxx List Server.
 Do use the following as the email Subject Line:
           SomeName, YourCountry Ubuntu 6.10  kernel 2.6.17-10-generic 
 This will alert cogent experts, and  distinguish cases in the Archives.
 YourCountry will enable Country Code guidance.
 Occassionally responses are blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org .
 Local Linux experts can be found through: http://www.linux.org/groups/index.html
--------------------------  System information ----------------------------
 Ubuntu 6.10 
Linux version 2.6.17-10-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Dec 5 22:28:26 UTC 2006 (Ubuntu 2.6.17-10.34-generic)
 scanModem update of:  2006_December_25
The modem symbolic link is /dev/modem -> ttySL0

USB modem not detected by lsusb

Modem or host audio card candidates have firmware information:

 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:27d8	1462:0349	Audio device: Intel Corporation 82801G 

 Modem interrupt assignment and sharing: 
169:        305          0   IO-APIC-level  uhci_hcd:usb4, ohci1394, sdhci:slot0, yenta, HDA Intel, i915@pci:0000:00:02.0

 --- Bootup diagnositcs for card in PCI slot 00:1b.0 ----
[17179582.736000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179582.736000] PCI: Setting latency timer of device 0000:00:1b.0 to 64

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

8086:27d8 is a High Definition Audio card, possibly hosting a soft modem.

 For candidate modem in PCI bus:  00:1b.0
   Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
      Primary PCI_id  8086:27d8
    Subsystem PCI_id  1462:0349 
    Softmodem codec or Vendor from diagnostics: 11c1, an AgereSystems type.
                              from    Archives: 
      

 This is a NEW softmodem case!  Please send the output ModemData.txt 
 to DISCUSS@xxxxxxxxxxxxx , even if further assistance is not needed.
 It will enrich the Archive and help others!
 -------------------------------------------
 Lacking a dsp (digital signal processing) chip, the modem is a software 
 intensive or "softmodem" type. Its primary controller manages the traffic 
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:	slmodemd

 An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-hda-intel
 provides Low Level support enabling contact with the modem hardware.
 For all BUT Conexant chip soft modems (using hsfmodem software)
 complementary High Level support is through a Smartlink utility:  slmodemd

 Download from http://linmodems.technion.ac.il/packages/smartlink/ 
 the package SLMODEMD.gcc4.tar.gz having a compiled slmodemd. Unpack under Linux with:
 	$ tar zxf SLMODEMD.gcc4.tar.gz
 and read instructions therein. But briefly, the modem is setup with command:
 	sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 
 reporting dynamic creation of ports:
	/dev/ttySL0 --> /dev/pts/N   , with N some number
 Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.

 Already loaded into the kernel is snd-hda-intel and audio drivers it depends on,
 displayed by:	lsmod | grep snd_hda_intel
Module                  Size  Used by
-------------------------------------
snd_hda_intel          20756  1 
snd_hda_codec         185472  1 snd_hda_intel
snd_pcm                84612  7 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd                    60164  12 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
snd_page_alloc         11656  5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm


The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
	/proc/asound/pcm
-------------------------------
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-02: ALC883 Digital : ALC883 Digital : playback 1
00-01: ALC883 Analog : ALC883 Analog : capture 2
00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 2

	/proc/asound/modules
-------------------------------
 0 snd_hda_intel
	/proc/asound/card0/codec#1
-------------------------------
Codec: Generic 11c1 Si3054
Address: 1
Vendor Id: 0x11c13026
Subsystem Id: 0x11c13026
Revision Id: 0x100700
-------------------------------
Current support status of HDA cards is:
  Vendor IDs  Chip maker     Support type 
  ----------  ----------    -------------
  0x14f12bfa  Conexant      hsfmodem , not slmodemd compatible
  0x11c13026  AgereSystems  snd-hda-intel, slmodemd supported
  0x11c11040  AgereSystems      "             "    , patch needed
  0x11c13055  AgereSystems      "             "    ,      "
  0x163c3055  Smartlink         "             "    ,      "
  0x163c3155    "               "             "    ,      "
  0x10573055  Motorola          "             "    ,      "
  0x10573155     "              "             "    ,      ""
as of October 2006.

and from the command:
	aplay -l | grep -i modem


----------------end Softmodem section --------------

Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.2
             and the compiler used in kernel assembly: 4.1.2


 
 Compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   kernel_headers base folder /lib/modules/2.6.17-10-generic/build
Compressed files at: /usr/src/linux-source-2.6.17.tar.bz2


Checking pppd properties:
	-rwsr-xr-- 1 root dip 260920 2006-07-10 21:13 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
auth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx


 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   lrwxrwxrwx 1 root root 6 2006-12-29 12:23 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:
/etc/udev/rules.d/60-symlinks.rules:# Create /dev/modem symlink
/etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*",			SYMLINK+="modem"
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ;  modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0) 
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux