Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.tar.gz having a compiled slmodemd. Unpack
under Linux with:
$ tar zxf SLMODEMD.gcc4.tar.gz
and read instructions therein. But briefly, the modem is setup with
command:
slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through
guidance.
On 12/23/06, Andreas Ladas <a.a.ladas@xxxxxxxxx> wrote:
Follows entire text of ModemData file, which says it has found a
hitherto nondescript softmodem and that you would like to hear about it.
The machine is a HiGrade M6500 Laptop, vintage 2003, dual booting with
XP but I am sending this now and will investigate what XP may tell me
about the chipset later. I was previously under the impression it was a
PCTel chipped device. Scanmodem was version downloaded today.==
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List
Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Fedora Core release 6 (Zod)
Kernel kernel 2.6.18-1.2868.fc6
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail
filters.
So in a day, also check the Archived responses at
http://www.linmodems.org .
Local Linux experts can be found through:
http://www.linux.org/groups/index.html
-------------------------- System information
----------------------------
Fedora Core release 6 (Zod)
Kernel
Linux version 2.6.18-1.2868.fc6
(brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20061011
(Red Hat 4.1.1-30)) #1 SMP Fri Dec 15 17:31:29 EST 2006
scanModem update of: 2006_December_20
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:02.6 1039:7013 1071:8575 Modem: Silicon Integrated Systems [SiS]
AC'97 Modem Controller
Modem interrupt assignment and sharing:
11: 751837 XT-PIC ohci_hcd:usb1, ohci_hcd:usb2, SiS
SI7012, SiS SI7013 Modem
--- Bootup diagnositcs for card in PCI slot 00:02.6 ----
ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKF] -> GSI 11 (level,
low) -> IRQ 11
ACPI: PCI interrupt for device 0000:00:02.6 disabled
PCI: Enabling device 0000:00:02.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKF] -> GSI 11 (level,
low) -> IRQ 11
The PCI slot 00:02.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
For candidate modem in PCI bus: 00:02.6
Class 0703: 1039:7013 Modem: Silicon Integrated Systems [SiS] AC'97
Modem Controller
Primary PCI_id 1039:7013
Subsystem PCI_id 1071:8575
Softmodem codec or Vendor from diagnostics: SIL21, a Pctel type.
from Archives:
This is a NEW softmodem case! Please send the output ModemData.txt
to DISCUSS@xxxxxxxxxxxxx , even if further assistance is not needed.
It will enrich the Archive and help others!
-------------------------------------------
Lacking a dsp (digital signal processing) chip, the modem is a
software
intensive or "softmodem" type. Its primary controller manages the
traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver:
snd-intel8x0m
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility:
slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.tar.gz having a compiled slmodemd. Unpack
under Linux with:
$ tar zxf SLMODEMD.gcc4.tar.gz
and read instructions therein. But briefly, the modem is setup with
command:
slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through
guidance.
Already loaded into the kernel is snd-intel8x0m and audio drivers it
depends on,
displayed by: lsmod | grep snd_intel8x0m
Module Size Used by
-------------------------------------
snd_intel8x0m 21325 0
snd_ac97_codec 94945 2 snd_intel8x0m,snd_intel8x0
snd_pcm 80453 5
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd 57029 14
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
snd_page_alloc 14281 3 snd_intel8x0m,snd_intel8x0,snd_pcm
The diagnostic outputs for this softmodem section have their raw
information in
folders and text files under /proc/asound/ which you can browse. The
information
is from files:
/proc/asound/pcm
-------------------------------
00-01: Intel ICH - MIC ADC : SiS SI7012 - MIC ADC : capture 1
00-00: Intel ICH : SiS SI7012 : playback 1 : capture 1
01-00: Intel ICH - Modem : SiS SI7013 Modem - Modem : playback 1 :
capture 1
/proc/asound/modules
-------------------------------
0 snd_intel8x0
1 snd_intel8x0m
/proc/asound/card1/codec97#0/mc97#1-1+regs
-------------------------------
0:7c = 5349 and 0:7e = 4c21
which were translated from hexadecimal code into: SIL21
/proc/asound/card1/codec97#0/mc97#1-1
-------------------------------
Extended modem ID: codec=1 LIN1
and from the command:
aplay -l | grep -i modem
card 1: Modem [SiS SI7013 Modem], device 0: Intel ICH - Modem [SiS
SI7013 Modem - Modem]
----------------end Softmodem section --------------
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.1
and the compiler used in kernel assembly: 4.1.1
Kernel-header resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
kernel-source-2.6.18-1.2868.fc6
Checking pppd properties:
-r-xr-xr-x 1 root root 312492 Dec 1 12:51 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
lock
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev.rules:KERNEL=="modems/mwave*", NAME="%
k", GROUP="uucp", MODE="0660"
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
