В сообщении от Sunday 28 October 2007 20:48:13 Daniel написал(а): > Dear all, > > I have big question in my mind about "tc filter" sintax. If I give "tc -s > -d filter sh dev eth0" command, then the output is like below : > > filter parent 1: protocol ip pref 1 u32 > filter parent 1: protocol ip pref 1 u32 fh 800: ht divisor 1 > filter parent 1: protocol ip pref 1 u32 fh 800::800 order 2048 key ht 800 > bkt 0 flowid 1:2 (rule hit 21553629 > success 37907) > match 00160000/ffff0000 at 20 (success 37907 ) > > ... > > My question is : > 1. What is "fh 800:" and "fh 800::800" mean ? > 2. How I change the value "800" in "fh 800::800" ? I'm guessing this is > default value and I need to change that because my filter rule can be more > than 0xfff line. <skip /> There is a rather unclear howto chapter: http://lartc.org/howto/lartc.adv-filter.hashing.html But it is very correct. Try it (actually, I understood it not from the first attempt ;)) -- Peter V. Saveliev _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
