depends what you haev set up. if its static then all the clients needs to
be configured that way. if its dhcp then it depends on your dhcp server.
i use dnsmasq and enabled /etc/ethers where i put the mac address and
assigned ip there.
matt
On Tue, 11 Sep 2007, Denny Zulfikar wrote:
Dear all,
I have a server with 4 ethernet port interfaces. Also, I have four clients
that will connected directly (cross-cable) to one-by-one of each port
ethernet interfaces of my server.
|--SERVER--\
| eth0-- ------------------ client A
| eth1-- ------------------ client B
| eth2-- ------------------ client C
| eth3-- ------------------ client D
|------------------/
I want all IP address of my server ethernet is set to same IP (ex,
172.16.1.1).
IP client A : 172.16.1.11
IP client B : 172.16.1.12
IP client C : 172.16.1.13
IP client D : 172.16.1.14
how to make that configuration working?
Thanks for your response.
Best regards,
Denny Zulfikar
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
