2 ISP connection sharing problem

[Arman <arman.anwar@xxxxxxxxx>]

I have divided my network into 2 parts now that is 193.168.3.127/25 and 192.168.3.128/25. I want to route part1 to ISP1 and Part 2 to ISP2. I have made changes into rules. But I think my Tables T1,T2 are not used and default table is in use. How can I command to use tables T1,T2 instead of default table. route command output is

Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.3.0     *               255.255.255.0   U     0      0        0 eth0
203.81.213.0    *               255.255.255.0   U     0      0        0 eth2
192.168.1.0     *               
255.255.255.0   U     0      0        0 eth1
169.254.0.0     *               255.255.0.0     U     0      0        0 eth2
default         
203.81.213.1    0.0.0.0         UG    0      0        0 eth2

-- 
Regards,
Arman
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc