> "ip route add default via ppp0 table T1 "
via is not for device name.
YES, THAT'S right. Small error. pls forgive me.
After ppp0 is up, type ifconfig and see the gateway,and use that gateway.
And also , Pls let me rectify the below rule as well
pls pay attnetion to ipaddressofppp0 written in BOLD letters. in the script , I have used the ip address of eth1 (i.e- 202.51.78.122 ). pls replace that rule with the below rule.
ip route add default scope global nexthop via ipaddressoppp0 dev eth1 weight 1 nexthop via 203.78.165.153 dev eth2 weight 1
-----Original Message-----
From: lartc-bounces@xxxxxxxxxxxxxxx [mailto: lartc-bounces@xxxxxxxxxxxxxxx] On Behalf Of Indunil Jayasooriya
Sent: Tuesday, August 21, 2007 7:12 PM
To: mangal regmi; lartc@xxxxxxxxxxxxxxx
Subject: Re: two providers
Pls either DELETE your script or save it somewhere else.
and Now, replace your script with this.
AND TRY, if it works.
this is the script.
echo "11 T1" >> /etc/iproute2/ rt_tables
echo "12 T2" >> /etc/iproute2/rt_tables
ip route add 202.51.78.0/24 dev eth1 src 202.51.78.122 table T1
ip route add default via ppp0 table T1
ip route add 203.78.165.0/29 dev eth2 src 203.78.165.154 table T2
ip route add default via 203.78.165.153 table T2
ip rule add from 202.51.78.122 table T1
ip rule add from 203.78.165.154 table T2
ip route add default scope global nexthop via 202.51.78.122 dev eth1 weight 1 nexthop via 203.78.165.153 dev eth2 weight 1
THAT'S it. try and let me know.
N-JOY IPROUTE2
On 8/21/07, mangal regmi <mangalregmi@xxxxxxxxx> wrote:
many many thanks for ur help
ok i m making my problem more clear...
my LAN ip is :172.16.100.0/24
ip of eth1 is :202.51.78.122 and this is fixed and permanent address
and it has no netmask and gateway(so, to provide internet to my LAN i have used the ppp0 for this connection )
ip of eth2 : 203.78.165.154; netmask: 255.255.255.248; gateway:203.78.165.153
for eth0 my file is :/etc/sysconfig/network-scripts/ifcfg-eth0
for eth1 :/etc/sysconfig/network-scripts/ifcfg-eth1
for eth2:/etc/sysconfig/network-scripts/ifcfg-eth2
and my rules are placed in /etc/iproute2/rt_tables as suggested by lartc.org
and the whole copy of my above file is copied below:::>>>
#
# reserved values
#
#255 local
#254 main
#253 default
#0 unspec
#
# local
#
#1 inr.ruhep
#
# below this is added by me and above this is by default
# two addational routing tables
#ip route add 202.51.78.0/24 dev eth1 src ppp0 table T1
#ip route add default via ppp0 table T1
ip route add 203.78.165.0/24 dev eth2 src 203.78.165.154 table T2
ip route add default via 203.78.165.153 table T2
# main routing table
ip route add 202.51.78.0/24 dev eth1 src ppp0
ip route add 203.78.165.0/24 dev src 203.78.165.154
# preference for default route
ip route add default via 202.51.76.122
# routing rules
ip rule add from ppp0 table T1
ip rule add from 203.78.165.154 table T2
# entries for local network
ip route add 172.16.100.0/24 dev eth0 table T1
ip route add 203.78.165.0/24 dev eth2 table T1
ip route add 127.0.0.0/8 dev lo table T1
ip route add 172.16.100.0/24 dev eth0 table T2
ip route add 202.51.78.0/24 dev eth1 table T2
ip route add 127.0.0.0/8 dev lo table T2
#load balancing
ip route add default scope global nexthop via ppp0 dev eth1 weight 1 nexthop via 203.78.165.153 dev eth2 weight 1
this above one is the full and exact copy of my working....
Indunil Jayasooriya < indunil75@xxxxxxxxx>wrote:
On 8/21/07, mangal regmi <mangalregmi@xxxxxxxxx> wrote:
Hi to all
i think this is not a new problem for this forum....but its newest for me as i m a new linux lerner. Even if it is new plzz....reply me ur answer..n if its already asked n have solution..plzz forward the solution. My problem is here mentioned:
I have fedora core 4 as a linux server. there r two external links connected to this.
I there are 2 external links, What is the file /etc/sysconfig/network like?
Can you witre down the file?
the settings are as: eth0 ->for internal (that is for LAN)
eth2 ->dsl connection
eth1 ->cable line connection( this connection has no gateway and netmask address provided so this is connected via ppp0. this is provided from ISP via DHCP but have the fixed ipaddress) Hey, What is this FIXED ip address? Is it a perment address?
YOUR eth0 of Fedora Server is for internal (that is for LAN)
YOUR eth2 of Fedora Server is connected to the dsl connection.
YOUR eth1 of Fedora Server is connected to the cable line connection. It has a ip.
i want to use these two link to provide the internet in my LAN where there are about 8 to 10 computers. i want that if any of the link goes down ...the other should continue the internet ...n also while both the links r up..the load should be shared between these two links....so that the net conection and downloads be faster....
i have heard about the scripts....that can do this....but i have no idea how to write these...scripts. i need these to be on after reboot also...
To come up the script after the reboot, There are two ways. Either you have to write everytning IN /etc/rc.d/rc.local or write the script as a seperate file and and make it executable by using chmod.
Pls see bellow.
first create the file as follows.
touch /etc/rc.d/loadbalancing
then , By using vi editor write the script and save it as usual. Then , Make it executable as follows.
chmod 755 /etc/rc.d/loadbalancing
and finally add PATH OF THE SCRIPT to /etc/rc.d/rc.local file as follows.
etc/rc.d/loadbalancing
That's it. Now, whenever you reboot the system, the scripts also comes up with the system.
i tried my best and i also refered the lartc.org ..but i could do a little only.
WHAT I DID: it works very well if i connect both of the links and the default path is via ppp0. but suppose if that is(ppp0) disconnected then the dsl connection can handle only upto 15/16 seconds. after that it disconnects . whats the solution ...plzz...as..soon as..possible...help..me...i m in big trouble....
UR SMALL HELP WILL BE A BIG BOON FOR ME
COULD YOU PLS write down your RULES . then, I will be able to help you.
Remember that i don't have gateway and netmask of eth1 connection. it has ip address only.it is NATed via ppp0. and also my all working are based on lartc.org only...in case of dsl connection i have just replaced the ip and gateways with my ip and gateways....n in case of ppp0 conection i have put ppp0 in the place of gateway n netmask and in place of ip i have given the ip of that link.
The above paragraph is not so clear.
THANKS IN ADVANCE
Luggage? GPS? Comic books?
Check out fitting gifts for grads at Yahoo! Search.
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
--
Thank you
Indunil Jayasooriya
Choose the right car based on your needs. Check out Yahoo! Autos new Car Finder tool.
--
Thank you
Indunil Jayasooriya
--
Thank you
Indunil Jayasooriya
_______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
