tc filter not work, why?

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I try to use tc on mips with linux-2.4.18 but the u32 filter dosn't work

I added htb qdisc to linux-2.4.18 and use it to limit the speed in
LAN, it only work well on the default class, for example

tc qdisc add dev eth0 root handle 1: htb default 10
tc class add dev eth0 parent 1:0 classid 1:1 htb rate 2000kbit
tc class add dev eth0 parent 1:1 classid 1:10 htb rate 500kbit ceil 500kbit
tc calss add dev eth0 parent 1:1 classid 1:11 htb rate 300kbit ceil 300kbit
tc filter add dev eth0 protocol ip u32 match ip dst 192.168.18.100 flowid 1:11

the host 192.168.18.100 have a speed of 500kbit rather than 300kbit.

if I don't set the default 10 class, all this dosn't have any effect.

why?

thank you.
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux