|
Dear List, I am wanting to perform some traffic shaping as the subject
of this email suggests. What I am wanting to do is this; I would like to have
traffic shaping performed on the following protocols: HTTP, RDP, GRE,
PPTP, SIP and IAX. Obviously I would like to have highest priority set
for voice packets so much so that the general http traffic does not impede on
the voice packets. I would like to have ample bandwidth available for RDP
so that I am able to connect to a remote site and not have too much lag but
ample enough that most tasks can be done. HTTP traffic would possibly
have the lowest priority of all the protocols that I have listed. So to
clarify priority would be something such as this: 1. IAX 2. SIP 3. GRE 4. PPTP 5. RDP 6. HTTP I have a linux gateway that I will use for performing the
traffic shaping and is setup in the following way: -------------
------------
--------- |
ADSL | <----------> | LINUX |
<----------> | LAN |
-------------
------------
--------- I plan to have the ADSL router forward all traffic to the
linux gateway using something similar to a BIMAP rule where all incoming and
outgoing traffic is made to appear to come from the public IP address. I
welcome any and all suggestions but would possibly prefer the most elegant of
solutions J Many thanks in advance Rangi |
_______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
