Hi, my setup is :
192.168.80.0/24 ---- > ( eth1:192.168.80.254 ) Linux ipsec Router
(ppp0/ipsec0) ----> [ internet ] <-----Sonicwall (192.168.1.1) <-----
192.168.1.0/24
When a pc in 192.168.80.0/24 pings anything on 192.168.1.0/24 it works
When Linux Ipsec Router pings anything on 192.168.1.0/24 it doesnt works,
ping packet goes trough default route because packet originates on eth1
some time ago i made a script using a 2nd route table but i cant find it or
remember
----- Original Message -----
From: "Christian Benvenuti" <christian.benvenuti@xxxxxxxxx>
To: <lartc@xxxxxxxxxxxxxxx>
Sent: Friday, April 06, 2007 7:29 PM
Subject: Re: Routing Question
Hi Fernando,
Hi, Somebody can help me , i have a linux gateway running ipsec, so if
i ping a host on a remote ipsec network from gateway packet goes out
with external ip address of gateway , is there a way that packets going
from gateway to a remote network be sourced from internal gateway ip ?
Thanks in advance
Fernando
I do not know what your setup and exact needs are, but have you
tried the "src" option of the "ip route" command?
Example:
ip route add dev eth1 192.168.1.0/24 src 10.0.1.1
^^^^^^^^^^^^
The routing code uses the primary IP address of the outgoing
interface, unless you explicitly configure the preferred
source address (as in the example above).
Regards
/Christian
[http://benve.info]
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
