Hi,
I posted this question yesterday on the Openvpn mailing list, with no
response, figured I will ask here too. I have been using openvpn for
quite a while, no major problems encountered. Now I need to allow the
server to access the lan of the client, and I can not figure out the
routing. This is what I have after the tunnel is brought up:
SERVER (A.A.A.A)
Arx:~# ip addr
...
3: eth1: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:04:e2:09:6c:ea brd ff:ff:ff:ff:ff:ff
inet 192.168.13.1/24 brd 192.168.13.255 scope global eth1
...
5: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,10000> mtu 1500 qdisc
pfifo_fast qlen 100
link/[65534]
inet 10.0.13.1 peer 10.0.13.2/32 scope global tun0
Arx:~# ip route
A.A.A.B dev ppp0 proto kernel scope link src A.A.A.A
10.0.13.2 dev tun0 proto kernel scope link src 10.0.13.1
10.0.13.0/24 via 10.0.13.2 dev tun0
192.168.13.0/24 dev eth1 proto kernel scope link src 192.168.13.1
default dev ppp0 scope link
CLIENT (192.168.9.11, machine behind a router)
root@Thesaurus:~# ip addr
...
2: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:11:09:8d:4f:c1 brd ff:ff:ff:ff:ff:ff
inet 192.168.9.11/24 brd 192.168.9.255 scope global eth0
...
5: tun_arx: <POINTOPOINT,MULTICAST,NOARP,UP,10000> mtu 1500 qdisc
pfifo_fast qlen 100
link/[65534]
inet 10.0.13.14 peer 10.0.13.13/32 scope global tun_arx
root@Thesaurus:~# ip route
10.0.13.13 dev tun_arx proto kernel scope link src 10.0.13.14
10.0.13.1 via 10.0.13.13 dev tun_arx
192.168.13.0/24 via 10.0.13.13 dev tun_arx
192.168.9.0/24 dev eth0 proto kernel scope link src 192.168.9.11
default via 192.168.9.1 dev eth0
From the client ping 192.168.13.1 works as expected. I want to be able
to ping 192.168.9.20 from the server. So on the server I did:
ip route add 192.168.9.0/24 via 10.0.13.14 dev tun0
and I got
RTNETLINK answers: Network is unreachable
Then I tried both
ip route add 192.168.9.0/24 via 10.0.13.1 dev tun0
ip route add 192.168.9.0/24 via 10.0.13.2 dev tun0
which seem to work, but the icmp packets vanish in the tunnel. I checked
all my firewall settings and the ip_forward settings on both systems. I
looked at the tunnel with tcpdump - packets go in and never come out.
Any suggestions?
Thanks
Peter
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
