Hello.
I am trying to get multi paths running, i.e I want to specify 2 paths
from a particular node to another.
To test this, I am setting up the following scenario:
I create 2 tap devices
tap0 = 10.1.1.1/32 netmask 255.255.255.0
tap1 = 10.2.2.2/32 netmask 255.255.255.0
I then issue the route command:
ip route add 10.3.3.3/32 nexthop via 10.1.1.2 nexthop via 10.2.2.3
The route table then looks like:
10.3.3.3
nexthop via 10.1.1.2 dev tap0 weight 1
nexthop via 10.2.2.3 dev tap1 weight 1
Pinging 10.3.3.3 causes arp requests on tap1 for 10.2.2.3 and never for
10.1.1.2.
(there is nothing connected to tap0 or tap1 so I don't expect anything
really, but I do expect the ARP requests, which would show that
splitting would work.
If the two routes were being used equally, I would have expected to see
arp requests for 10.1.1.2 also (wouldn't I?)
...Michael Flower
--
Michael Flower
ES Labs
Elantis Systems Inc.
+61 3 9550 0866
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
