Charles Price wrote: > Hi All, > > I'm trying to create a contended section of bandwidth using IMQ. I have the > imq0 device up and running, with traffic passing through it. > > Firstly, I need to throttle the entire device imq0 to 2mbit/s. > > I would then like to add throttle rules for individual IP addresses, allowing > them to pass up to 512kbit/s each, as long as imq0 has not reached its > 2mbit/s. > > The configuration I currently have is as follows: > > tc qdisc add dev imq0 root handle 1: htb default 1 > tc class add dev imq0 parent 1: classid 1:1 htb rate 2mbit burst 15k > > # IP 10.0.0.10 > tc class add dev imq0 parent 1:1 classid 1:10 htb rate 512kbit > tc qdisc add dev imq0 parent 10 handle 10: sfq > tc filter add dev imq0 protocol ip parent 1: prio 10 u32 \ > match ip src 10.0.0.10/32 flowid 1:10 > > # IP 10.0.0.20 > tc class add dev imq0 parent 1:1 classid 1:20 htb rate 512kbit > tc qdisc add dev imq0 parent 20 handle 20: sfq > tc filter add dev imq0 protocol ip parent 1: prio 20 u32 \ > match ip src 10.0.0.20/32 flowid 1:20 > > > Both IP addresses (10.0.0.10 and 10.0.0.20) aquire their 512kbit/s without > problem. However, when I add more classes like the ones above and pass > plently of traffic, each IP address still obtains its full 512kbit/s - > regardless of the 2mbit/s limit in the root class. > > Is there a way to achieve this? > > Thanks in advance, > > Charlie > _______________________________________________ > LARTC mailing list > LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > > > You can try using HFSC for such low speeds here is an example tc qdisc add dev imq0 root handle 1: hfsc default 7 tc qdisc add dev imq1 root handle 1: hfsc default 7 ########################### #Defining root class U/D### ########################### tc class add dev imq0 parent 1: classid 1:1 hfsc ul m1 2mbit d 500 m2 2mbit ls m1 2mbit d 500 m2 2mbit tc class add dev imq1 parent 1: classid 1:1 hfsc ul m1 2mbit d 500 m2 2mbit ls m1 2mbit d 500 m2 2mbit ########################### #7Mi klas NOT FILTRED ##### ########################### tc class add dev imq0 parent 1:1 classid 1:7 hfsc ul m1 8kbit d 500 m2 8kbit ls m1 8kbit d 500 m2 8kbit tc class add dev imq1 parent 1:1 classid 1:7 hfsc ul m1 8kbit d 500 m2 8kbit ls m1 8kbit d 500 m2 8kbit ###################################################################################### tc class add dev imq0 parent 1:1 classid 1:10 hfsc ul m1 2mbit d 500 m2 2mbit ls m1 2mbit d 500 m2 512kbit tc class add dev imq1 parent 1:1 classid 1:10 hfsc ul m1 2mbit d 500 m2 2mbit ls m1 2mbit d 500 m2 512kbit tc class add dev imq0 parent 1:1 classid 1:11 hfsc ul m1 2mbit d 500 m2 2mbit ls m1 2mbit d 500 m2 512kbit tc class add dev imq1 parent 1:1 classid 1:11 hfsc ul m1 2mbit d 500 m2 2mbit ls m1 2mbit d 500 m2 512kbit tc class add dev imq0 parent 1:1 classid 1:12 hfsc ul m1 2mbit d 500 m2 2mbit ls m1 2mbit d 500 m2 512kbit tc class add dev imq1 parent 1:1 classid 1:12 hfsc ul m1 2mbit d 500 m2 2mbit ls m1 2mbit d 500 m2 512kbit tc class add dev imq0 parent 1:1 classid 1:12 hfsc ul m1 2mbit d 500 m2 2mbit ls m1 2mbit d 500 m2 512kbit tc class add dev imq1 parent 1:1 classid 1:12 hfsc ul m1 2mbit d 500 m2 2mbit ls m1 2mbit d 500 m2 512kbit This is an example for fair sharing when every subscriber gets 2mbit if it is alone or 512kbit if there are other subscribers on line the speed of imq device never pass 2mbit or whatever you put on class 1:1 _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
