I'm using a script with tc, to limit my outgoing traffic :
tc qdisc add dev eth0 root handle 1: htb
tc class add dev eth0 parent 1: classid 1:1 htb rate 500kbit burst 6k
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip dst 172.28.54.9 flowid 1:1
I want to test bandwidth with iperf to see if limitation is correct.
Sometimes, I get correct measure for certain rates, but i often get measure that do not correspond to rate.
For example, if rate is 500kbit, measure is 2000kbit/s...
Can someone help me ?
Thanks,
Olivier
_______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
