Hi, On Monday 05 February 2007 03:43, Rio Martin wrote: > Dear all, > I have 3 backbones for my local network. > > 1st backbone: down 1024kbps, up 1024kbps through eth1 > 2nd backbone: down 2048kbps, up 2048kbps through eth2 > 3rd backbone: down 1024kbps, up 128kbps through eth3 > Local network: 192.168.0.0/16 through eth0 > Router: Linux Slakware 11 with iproute2 > > Please let me know how to shape both incoming and outgoing traffic for > this case. > LARTC doc only showing just 1 backbone. > Any idea to use HTB ? If shapping the outgoing traffic and policing the incoming traffic (rate limiting only) is enough, take a look at this: http://downloads.angulosolido.pt/QoS/HTB_shaper_basic.sh the HTB_shape and limit_incoming functions already do what you need. After you get familiar with, you can adapt as needed. Regards Gustavo > > Thanks before. > > - Rio.Martin - > _______________________________________________ > LARTC mailing list > LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc -- Angulo Sólido - Tecnologias de Informação http://angulosolido.pt _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
