On 12/11/06, Marco Berizzi
<pupilla@xxxxxxxxxxx> wrote:
Hello everybody.
I'm running linux 2.6.19 with nth match to
alternatively snat outgoing connections to
two different ip addresses for load balancing
between two adsl lines:
Here is:
$IPTABLES -t nat -A POSTROUTING -s my_ip --protocol tcp -m
multiport --dports 80,443 -m statistic --mode nth --every 2 -j SNAT --to
adslA
$IPTABLES -t nat -A POSTROUTING -s my_ip --protocol tcp -m
multiport --dports 80,443 -j SNAT --to adslB
Things are working pretty good, but some
applications (https home banking for example),
don't work correctly (because the remote
server see two different ip addresses). Is
there any trick to tell iptables to snat
always with the same source ip for the same
destination host? I have also modified SNAT
with SAME, but no luck.
TIA
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc