Gianluca \"acid_burn\" D'Andrea wrote:
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hi all!
>
> when I activate wondershaper on my dsl connection (pppoa vc mux), i get
> three errors:
>
> # sh -x /usr/sbin/wshaper ppp0
> + /usr/sbin/xmlstarter setenv tc_downlink
> + DOWNLINK=
> + /usr/sbin/xmlstarter setenv tc_uplink
> + UPLINK=
> + [ -z ]
> + cat /proc/avalanche/avsar_modem_stats
> + grep Connection Rate
> + awk {printf("%d", $8)}
> + DOWNLINK=1504
> + [ -z ]
> + cat /proc/avalanche/avsar_modem_stats
> + grep Connection Rate
> + awk {printf("%d", $4)}
> + UPLINK=320
> + DEV=ppp0
> + /usr/sbin/xmlstarter setenv tc_hipriohostsrc
> + HIPRIOHOSTSRC=
> + /usr/sbin/xmlstarter setenv tc_hipriohostdst
> + HIPRIOHOSTDST=
> + /usr/sbin/xmlstarter setenv tc_hiprioportsrc
> + HIPRIOPORTSRC=
> + /usr/sbin/xmlstarter setenv tc_hiprioportdst
> + HIPRIOPORTDST=
> + /usr/sbin/xmlstarter setenv tc_nopriohostsrc
> + NOPRIOHOSTSRC=
> + /usr/sbin/xmlstarter setenv tc_nopriohostdst
> + NOPRIOHOSTDST=
> + /usr/sbin/xmlstarter setenv tc_noprioportsrc
> + NOPRIOPORTSRC=
> + /usr/sbin/xmlstarter setenv tc_noprioportdst
> + NOPRIOPORTDST=
> + [ ppp0 = status ]
> + [ ppp0 = stop ]
> + tc qdisc del dev ppp0 root
> + tc qdisc del dev ppp0 ingress
> + tc qdisc add dev ppp0 root handle 1: htb default 20
> + tc class add dev ppp0 parent 1: classid 1:1 htb rate 320kbit burst 6k
> + tc class add dev ppp0 parent 1:1 classid 1:10 htb rate 320kbit burst
> 6k prio 1+ tc class add dev ppp0 parent 1:1 classid 1:20 htb rate
> 288kbit burst 6k prio 2+ tc class add dev ppp0 parent 1:1 classid 1:30
> htb rate 256kbit burst 6k prio 2+ tc qdisc add dev ppp0 parent 1:10
> handle 10: sfq perturb 10
> RTNETLINK answers: Invalid argument <----- 1'st error ------
> + tc qdisc add dev ppp0 parent 1:20 handle 20: sfq perturb 10
> RTNETLINK answers: Invalid argument <----- 2'nd error ------
> + tc qdisc add dev ppp0 parent 1:30 handle 30: sfq perturb 10
> RTNETLINK answers: Invalid argument <----- 3'rd error ------
It looks like you don't have sfq. Check your kernel config and
/lib/modules/$VERSION/net/sched/sch_sfq.o since sfq is normally built as
a module.
tc needs sfq too.
--
gypsy
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
