d3xcrIpt wrote:
Help me ...
I try use the tc filter, but seems he doesn't work, I already
reconfigured my kernel ( 2.4.32 ) with all options related a QOS
enabled ( like modules ) and nothing happens. I get the tc tool from
HTB source package, well this is my set :
eth0 is my internal NIC.
tc qdisc add dev eth0 root handle 1: htb default 12
tc class add dev eth0 parent 1: classid 1:1 htb rate 100kbps ceil
100kbps
tc class add dev eth0 parent 1:1 classid 1:10 htb rate 30kbps ceil
100kbps
tc class add dev eth0 parent 1:1 classid 1:11 htb rate 10kbps ceil
100kbps
tc class add dev eth0 parent 1:1 classid 1:12 htb rate 60kbps ceil
100kbps
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src
<my_ip> flowid 1:10
tc qdisc add dev eth0 parent handle 20: pfifo limit 5
tc qdisc add dev eth0 parent handle 30: pfifo limit 5
tc qdisc add dev eth0 parent handle 40: sfq perturb 10
OK. but ... when I look the qdiscs
tc -s -d qdisc
qdisc htb 1: r2q 10 default 12 direct_packets_stat 411 ver 3.17
Sent 181174 bytes 1324 pkts (dropped 0, overlimits 0)
qdisc pfifo 20: parent 1:10 limit 5p
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
qdisc pfifo 30: parent 1:11 limit 5p
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
qdisc sfq 40: parent 1:12 quantum 1514b limit 128p flows 128/1024
perturb 10sec
Sent 130091 bytes 866 pkts (dropped 0, overlimits 0)
All traffic is going to default class ( 1:12 ), I try many filters
with tc tool but nothing happens.
I look the modules with lsmod and "cls_u32.o" and "sch_htb.o" is all
loaded.
Thanks everyone.
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
You need to do this on external NIC. HTB is a queueing mecanism, which
is done on outgoing traffic.
|
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
