Hello all,
I am trying to make a little bit more complex QoS/Shapping form and
I need to shape a PPPoE conection that I serve to my clients. So this is
the scope:
client connects using pppoe so it gets an IP address (from pppoe pool)
and open an interface into my linux box
interface for this client is ppp0
client has got an ip 1.1.1.2/32 and it is poiting to pppoe-server 1.1.1.1
So, if i want to shape download for this client its really easy and
I make a htb rule that shapes all traffic into ppp0... My problem is
when I have to shape upload traffic. All my traffic goes for eth0 to the
world. I tryed to make this rule:
$TC class add dev eth0 parent 1:1 classid 1:500 htb rate 200Kbit ceil
200Kbit
$TC filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip src
1.1.1.2/32 flowid 1:500
But this rule is not matching the upload connection. If i put the
same rule to an IP (i set an ip into client) this rule works but into
pppoe conection it did not work properly.
Someone has some tip to match the interface that the conection is
coming from? Like I wanna match all traffic coming from ppp0 and going
throw eth0 to be shapped?! There is anyway to make this work?
Att,
Nataniel Klug
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
