Hi all, I setup a Linux machine to act as Lan Authentication server. So, the same script that redirect the http connection to a login web page, it create some queues to limit traffic, login by login. The PC uses only 1 ethernet interface that receive the packets source routed to it and forward/nat to the external gateway using the same interface. For each login I create a queue like that: tc class add dev '.$if_externa.' parent 1:1 classid 1:'.$filaDown.' htb rate '.$banda_down.'kbit ceil '.$banda_down.'kbit prio 1' tc filter add dev $if_externa protocol ip parent 1:0 prio 1 handle ::$filaDown u32 match ip dst $ipcliente/32 flowid 1:$filaDown My problem is that most of the queues created does NOT get full rate as defined. I can see the packets entering backlog with much less rate than defined, ex: class htb 1:b1 parent 1:1 prio 1 rate 256Kbit ceil 256Kbit burst 1926b cburst 1926b Sent 6644151 bytes 5435 pkts (dropped 0, overlimits 0) rate 669bps backlog 107p Some help ? Thanks in advance, Luciano Lima _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
