hi to all,
I'm sorry, the previous mail was incomplete. I rewrite all COMPLETE
informations.
I'm studying traffic shaping using kernel 2.6.8 (debian sarge).
well, I have this problem: priority doesn't work.
I try with:
- qdisc prio:
tc qdisc add dev eth1 root handle 12: prio bands 3
tc qdisc add dev eth1 parent 12:1 handle 13: tbf rate 10Mbit \
buffer 1600 limit 3000
tc qdisc add dev eth1 parent 12:2 handle 14: tbf rate 10Mbit \
buffer 1600 limit 3000
tc qdisc add dev eth1 parent 12:3 handle 15: tbf rate 10Mbit \
buffer 1600 limit 3000
tc filter add dev eth1 protocol ip handle $MARK1 fw flowid 12:1
tc filter add dev eth1 protocol ip handle $MARK2 fw flowid 12:2
tc filter add dev eth1 protocol ip handle $MARK3 fw flowid 12:3
Yes there is a bug with PRIO, as I know from kernel 2.6.12 there is no this
bug.
Try to find patch for file cls_u32.c or install new kernel
Regards
Radek
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
