Hello, I'm having some problems I can't see trying to configure two network cards. I have eth0 and eth1. On eth0 I have 10.1.1.1.1 ON eth1 I have 192.168.2.250 After my script runs I can ping the 10.1.1.0/24 network but not the 192.168.2.0/24 network. 192.168.2/24 is network un-reachable .... Hmmm ... Can you check over my 6 commands below and see where my problem is? Many thanks. Regards, Rudi. Routing Tables 255 local 254 main 253 default 0 unspec # # local # #1 inr.ruhep 200 implan 201 inet echo "Setup NIC 0" ip addr add 10.1.1.1/24 dev eth0 brd + echo "Setup NIC 1" ip addr add 192.168.2.250/24 dev eth1 brd + echo "Setup Default Route [ inet table ]" ip route add default via 10.1.1.254 proto static table inet echo "Setup LAN Route [ implan table ]" ip route add 192.168.2/24 via 192.168.2.250 proto static table implan echo "Setup LAN ip rule" ip rule add to 192.168.2/24 prio 16000 table implan echo "Setup Internet ip rule" ip rule add to 0/0 prio 17000 table inet _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
