Oliver Hookins wrote:
burst 19k will limit you unless your HZ=1000
Our HZ is 512.
I don't know if it makes any difference, but I would have chosen 500 so
that it was 2ms. The default now is 250 and with 19k burst that fits the
speed you get really well - with 512 it would be around 70meg. I would
get rid of the 2 burst settings you use.
Not sure can you show output of tc -s -d class ls dev eth0 while it's
running at 2x speed.
class htb 1:1 root rate 100Mbit ceil 100Mbit burst 24Kb/8 mpu 0b cburst
132644b/8 mpu 0b level 7
Sent 741267447736 bytes 735629628 pkts (dropped 0, overlimits 0)
rate 4316188bps 22688pps
lended: 489885589 borrowed: 0 giants: 0
tokens: -78 ctokens: 6677
class htb 1:10 parent 1:1 leaf 10: prio 0 quantum 200000 rate 50Mbit
ceil 80Mbit burst 19Kb/8 mpu 0b cburst 106440b/8 mpu 0b level 0
Sent 740240463634 bytes 734522966 pkts (dropped 429910165, overlimits 0)
rate 4233957bps 22358pps
lended: 244988819 borrowed: 489885528 giants: 0
tokens: -293 ctokens: 6636
class htb 1:20 parent 1:1 leaf 20: prio 0 quantum 13107 rate 1Mbit ceil
1Mbit burst 2Kb/8 mpu 0b cburst 2Kb/8 mpu 0b level 0
Sent 755354078 bytes 755048 pkts (dropped 0, overlimits 0)
rate 84198bps 321pps backlog 4p
lended: 755220 borrowed: 61 giants: 0
tokens: -21517 ctokens: -21517
84198 bps - tc means bytes/sec by this, so it's < 1mbit. Htb uses really
long (100 sec) average for its rate so it probably is giving 1mbit.
Andy.
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
