Any ugly trick is to active proxy_arp on the interfaces of the router
(/proc/sys/net/ipv4/conf/*/proxy_arp).
Then the external interface will scream "i have it!" on all of the arp
requests for the other ip addresses (as
soon as the router has the other machines in his arp-table). if you have
ip_forward enabled and your clients
using the internal interface address of the router as gateway you have
what you want.
Adam Gawda schrieb:
Hi,
I have IP 64.10.12.64/26 (example)
and there's gateway 64.10.12.65 and I want doing something like this:
-------------------------------------64.10.12.65 GW
--------------------------- ROUTER ----------- --------------------clients
eth0 64.10.12.66 eth1 64.10.12.66 from 64.10.12.67 to 126
255.255.255.192 255.255.255.192 255.255.255.192
GW 64.10.12.65
I want have all clients behind router (traffic shaper, firewall , etc). May I do it other method than subneting ? - because now doesn't work
----------------------------------------------------
Pamiętaj o wszystkich/ -im w te święta!
Zajrzyj na swieta.wp.pl i wygraj aparaty cyfrowe Panasonic!
Kliknij: http://klik.wp.pl/?adr=www.swieta.wp.pl&sid=599
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
