I have a machine with two routes to the internet doing load balancing on
the connections and NAT for internal machines. For inbound ssh connections
and outbound connections to anything, it will occasionally "lose" packets.
If I Control-C out of ssh and try again, it usually works, but not always.
After a few tries it does connect, but frequently stalls and hangs
permanently. I did add rules to try and keep connections stuck where they
started:
ip rule add from 200.200.200.1 table eth1
ip rule add from 192.168.0.2 table eth2
In /etc/iproute2/rt_tables:
201 eth1
202 eth2
ip rule list does show the rules:
0: from all lookup local
32764: from 192.168.0.2 lookup eth2
32765: from 200.200.200.1 lookup eth1
32766: from all lookup main
32767: from all lookup default
Is there some other command I can use to see if they really are sticking
where they should?
Thanks
dave
--
Dave Weis
djweis@xxxxxxxxxxxxxxxxxx
http://www.internetsolver.com/
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
