Andy Furniss wrote:
Paweł Staszewski wrote:
Hello i have some problems on 2.6.14 kernel dummy and iproute :)
i have server with 2 nics :
eth0 <> inet
eth1 <> lan
dummy0 (i want to shape incoming traffic from lan machine on this
interface)
OK but the script sends both egress and ingress on eth1 to dummy0.
Yes i try to send ingress and egress packets from eth1 to dummy
my config:
tc qdisc del dev dummy0 root
tc qdisc add dev dummy0 root handle 1: htb
tc class add dev dummy0 parent 1: classid 1:1 htb rate 100kbit ceil
100kbit
tc class add dev dummy0 parent 1: classid 1:2 htb rate 100kbit ceil
100kbit
tc filter add dev dummy0 protocol ip pref 1 parent 1: handle 1 fw
classid 1:1
tc filter add dev dummy0 protocol ip pref 2 parent 1: handle 2 fw
classid 1:2
ifconfig dummy0 up
tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 1: htb
tc filter add dev eth1 parent 1:0 protocol ip prio 10 u32 \
match ip dst 0/0 flowid 1:1 \
action ipt -j MARK --set-mark 2 \
action mirred egress redirect dev dummy0
tc qdisc del dev eth1 ingress
tc qdisc add dev eth1 ingress
tc filter add dev eth1 parent ffff: protocol ip prio 10 u32 \
match ip src 0/0 flowid 1:1 \
action ipt -j MARK --set-mark 1 \
action mirred egress redirect dev dummy0
Apart from adding a modprobe this works for me using the attached
dummy.c on 2.6.12.
I load dummy on system start.
and i have only tx-es on dummy0 interface no rx packets and lan
machine cannot comunicate with server and vice-versa
any solutions ... i readed this post
http://oss.sgi.com/projects/netdev/archive/2004-04/msg00251.html
and i have the same config ... but :)
That patch didn't go into kernel and was superseeded by another
version which I attach - but AFAIK it's still not in kernel yet and
jamal is still working on it.
Andy.
Ok thanks i try your attached patch tommorow and try to do some tests.
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
