Samuel Koscelansky / "SUBNET" wrote:
I tested shaping on vlan and it seems OK for me (even though my switch
doesn't do vlan it doesn't seem to block oversize frames). I noticed a
few things with your setup -
#classes for download
/sbin/tc class add dev eth0.100 parent 100: classid 100:1 htb rate 4000kbit quantum 6000
/sbin/tc class add dev eth0.100 parent 100:1 classid 100:2 htb rate 1000kbit quantum 6000
/sbin/tc qdisc add dev eth0.100 parent 100:2 handle 1002 pfifo limit 10
You attach pfifo as if 100:2 is a leaf class here
#my pc testing class
#down
/sbin/tc class add dev eth0.100 parent 100:2 classid 100:2828 htb rate 1000kbit quantum 6000
/sbin/tc filter add dev eth0.100 parent 100: protocol ip prio 1 u32 match ip dst 217.67.28.28 classid 100:2828
/sbin/tc qdisc add dev eth0.100 parent 100:2828 handle 1002828 sfq perturb 10
But have it as a parent here, also I think the handle on sfq is too big
and if eth0.100 is to your ISP then dst should be changed src in the match.
Andy.
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc