Hi... I m really very sorry... actually I did a very stupid mistake... in adding rules I added using "from" instead of "to" .... :) I m really sorry for wasting all the time.. REgards Shantanu On 7/17/05, Shantanu Kumar <shantanu.iitg@xxxxxxxxx> wrote: > Hi... > > I have installed ip route 2 package on Linux kernel 2.4.25 > > I am using 2 tables: > > ################################### > > ebox:100.254~# ip route list table ALTER > default via 192.168.100.253 dev br0 > > ebox:100.254~# ip route list table main > 10.0.0.254 dev ppp0 proto kernel scope link src 10.0.0.1 > 192.168.100.0/24 dev br0 proto kernel scope link src 192.168.100.254 > 192.168.100.0/24 dev eth1 proto kernel scope link src 192.168.100.233 > 192.168.200.0/24 dev eth2 proto kernel scope link src 192.168.200.254 > 127.0.0.0/8 dev lo scope link > default via 10.0.0.254 dev ppp0 > > > > ##################################### > > > Now I set up the rules : > > ##################################### > > ebox:100.254~# ip rule list > 0: from all lookup local > 7: from 216.239.59.147 lookup main > 8: from 202.141.80.6 lookup ALTER > 32739: from 202.141.80.6 lookup ALTER > 32740: from 66.102.11.99 lookup ALTER > 32741: from 66.102.11.104 lookup main > 32742: from 64.73.37.225 lookup main > 32743: from 216.239.59.103 lookup main > 32744: from 210.43.44.8 lookup main > 32745: from 64.233.183.19 lookup main > 32746: from 64.233.183.83 lookup ALTER > 32747: from 64.233.183.106 lookup ALTER > 32748: from 210.157.158.37 lookup ALTER > 32749: from 66.249.87.99 lookup main > 32752: from 213.244.168.210 lookup main > 32753: from 66.197.129.37 lookup ALTER > 32754: from 82.102.4.72 lookup ALTER > 32755: from 216.73.82.14 lookup ALTER > 32756: from 216.73.82.70 lookup ALTER > 32757: from 216.74.132.11 lookup main > 32758: from 216.109.117.205 lookup ALTER > 32759: from 202.138.124.172 lookup main > 32760: from 216.109.127.16 lookup main > 32761: from 209.244.156.19 lookup ALTER > 32762: from 68.142.228.136 lookup ALTER > 32763: from 82.102.4.57 lookup ALTER > 32765: from 216.109.118.65 lookup main > 32766: from all lookup main > 32767: from all lookup default > > > ##################################### > > > But when I try to trace the route of a packet with destination address > such that according to ip rule table ALTER should be considered ... > its not following the rule... its always following table Main... > > ##################################### > > ebox:100.254~# tcptraceroute -n 202.141.80.6 > Selected device ppp0, address 10.0.0.1, port 40113 for outgoing packets > Tracing the path to 202.141.80.6 on TCP port 80 (http), 30 hops max > 1 10.0.0.254 0.333 ms 0.212 ms 0.210 ms > 2 202.141.80.6 [open] 0.589 ms 0.591 ms 0.588 ms > > > ###################################### > > > > I would appreciate if I can get any help on why this is not working .!!!! > > Thanks. > > Regards > Shantanu > _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
